Coverage, fit, and certification are what matter. Everything else is preference.
Ride Your Way
Find the helmet style that fits your ride, from open-road cruising to everyday adventures.
Gear Up With Eagle Leather
Visit our Lakewood store for expert help, a huge selection, and motorcycle gear you can see, try on, and compare in person.
Motorcycle Helmet Categories
Full-Face Motorcycle Helmets
Full-face helmets cover the head, face and chin with a fixed chin bar and, typically, a face shield. They offer enclosed coverage without a chin-bar hinge or locking mechanism. The tradeoff is less access to your lower face at stops because the chin bar cannot lift out of the way.
Modular helmets provide enclosed head, face and chin coverage when the chin bar and shield are closed. The chin bar opens for talking, drinking or getting air at stops without removing the helmet. That convenience adds hinges and a locking system. Weight, certifications and manufacturer-approved riding positions vary by model.
Open-face helmets, also called three-quarter helmets, cover the top, back and sides of the head without a chin bar. They offer an open-face riding experience with more side and rear head coverage than a half helmet. A compatible face shield can help with wind, weather and debris, but does not provide the protection of a chin bar.
Half helmets cover the upper portion of the head, leaving more of the sides and back exposed than three-quarter helmets. They offer a minimal, open riding experience, with reduced head coverage and no chin bar as the tradeoff. Some models include or accept a shield; compare eye-protection options, fit, retention and communication-system compatibility.
The LS2 Advant X (FF901) is a modular motorcycle helmet with a chin bar that rotates a full 180 degrees to rest behind the head, so the same helmet can be ridden as either a full face or an open face. The shell is high performance fiberglass composite (HPFC) and the helmet weighs 1600 g plus or minus 50 g. It is certified to ECE 22.06, ECE P and J (dual open and full face homologation), and DOT FMVSS 218. Sizes run XS through 3XL across two shell sizes, and every helmet ships with a Pinlock 120XLT MaxVision insert, a dark smoke shield, and a carrying bag.
What this helmet is built for
The Advant X is aimed at riders who want one helmet for mixed use: closed up on the highway, opened up in traffic, at fuel stops, or on slow city miles. Because it carries both the ECE P (protective chin bar) and J (open face) ratings, it is legal to ride in either position rather than only for stopping. The tradeoff for that versatility is weight and cost: at roughly 3 lb 8 oz it is heavier than a comparable full face, and the rotating mechanism adds parts that a fixed-chin helmet does not have.
Key features
180-degree rotating chin bar, certified for use in both positions
High performance fiberglass composite (HPFC) shell, two shell sizes
Multi-density EPS with internal ventilation channels
Quick-release main shield with scratch-resistant and UV-resistant coatings
Hidden internal drop-down sunshield with easy-remove mechanism
Pinlock 120XLT MaxVision anti-fog insert included
Adjustable chin and top intake vents with rear exhaust ports
Laser-cut comfort liner: breathable, hypoallergenic, removable, washable
Micrometric metal buckle with reinforced chin strap
Emergency cheek pad release system for first responders
Reflective safety patch and chin curtain
Certification and construction
Advant X shell and safety specifications
Safety standards
ECE 22.06 and DOT FMVSS 218. ECE P and J certified as both an open face and a full face helmet.
Shell material
High Performance Fiberglass Composite (HPFC)
Weight
1600 g plus or minus 50 g (approximately 3 lb 8 oz)
Shell sizes
2 shells: XS to L, and XL to 3XL
EPS sizes
5 EPS: XS, S, M, L, XL to 3XL
Liner sizes
7 liners: XS, S, M, L, XL, 2XL, 3XL
Cheek pads
3 sizes: XS to XL, 2XL, 3XL. Available in slim or standard thickness.
Comfort, shield, security, and ventilation
Comfort
Extra-comfort laser-cut foam liner
Removable and washable
Breathable and hypoallergenic
Chin curtain
Shield system
Quick-release main shield
Scratch-resistant and UV-resistant
Pinlock 120XLT MaxVision insert included
Internal sunshield with hidden sliding button and easy-remove mechanism
Security
Micrometric metal buckle
Reinforced chin strap
Emergency release system
Multi-density EPS
Reflective safety patch
Ventilation
Chin vent and top intake vents
Rear exhaust ports
Channeled EPS to move air across the head
What is in the box
Helmet
Carrying bag
Dark smoke shield
Pinlock 120XLT MaxVision insert
How to measure for helmet fit
Measuring your head is the right place to start, but it is only a guideline. Different head shapes can require a slightly smaller or larger helmet in any given model, so trying on the specific model is always recommended. A helmet should be as snug as possible without being tight enough to cause a headache. Being fitted in person by a professional is the most reliable method.
Measure the circumference of your head with a tape measure, or with a length of string that you then line up against a ruler.
Start above the ear and circle all the way around, resting the tape about a half inch above the eyebrows and across the fullest part of the back of the head.
Measure several times so you do not end up with a reading that is too small or too large.
Compare your measurement to the size chart. If you fall between two sizes, take the larger size.
Replacement parts and accessories
The following Advant X components are sold separately. Note that some parts are shared with the Advant X Carbon but do not fit the standard Advant (FF906).
Advant X replacement part numbers and available options
Component
Part number
Options
Cheek pads
04-471
XS to XL in black standard, black slim version 1, and black slim version 2 (shorter tabs)
Liners
04-461
XS, S, M, L, XL, 2XL, 3XL
Baseplates
05-050
Black. Fits Advant X and Advant X Carbon.
Outer shields
04-428
Clear, dark smoke, photochromic, and dark electron iridium in silver, gold, red, blue, green, and black gold
Pinlock inserts
04-478
Pinlock 120 XLT MaxVision insert
Inner drop-down sunshields
04-468
Amber, clear, and dark smoke in version 1 and version 2. Fits Advant, Advant II, Advant X, and Advant X Carbon.
Common questions
Can the Advant X be ridden with the chin bar rotated back?
Yes. It carries ECE P certification as a full face and ECE J certification as an open face, which means it is homologated for riding in either position rather than only for stopping.
Does the Advant X come with a Pinlock insert?
Yes. A Pinlock 120XLT MaxVision anti-fog insert is included in the box, along with a dark smoke shield and a carrying bag.
Does it have an internal sun visor?
Yes. A drop-down sunshield is built into the shell and operates from a hidden sliding button. It can be removed without tools using the easy-remove mechanism.
How much does the Advant X weigh?
1600 g plus or minus 50 g, roughly 3 lb 8 oz. That is heavier than a typical fiberglass full face, which is the usual tradeoff for a modular chin bar mechanism.
What size shell will I get?
The Advant X uses two shells. Sizes XS through L share one shell, and XL through 3XL share the other, with five EPS densities and seven liner sizes spread across the range to keep proportions correct.
Can I change the fit without changing helmet size?
To a degree. Cheek pads are available in slim and standard thickness in three size groups, and the liner is sold separately in seven sizes, so the interior can be adjusted within a shell size.
Do Advant X parts fit the standard Advant?
Shields and Pinlock inserts do not. Advant X shields and inserts do not fit the Advant FF906, and Advant KPA shields do not fit the Advant X or Advant X Carbon. The inner drop-down sunshield is the exception and fits Advant, Advant II, Advant X, and Advant X Carbon.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Full forged carbon—shell and chin bar. The LS2 Advant X Carbon Full Forged delivers premium modular versatility in a lightweight 6K carbon-fiber helmet. Its 100% carbon chin bar rotates a full 180° for a clean open-face configuration, then locks back into full-face mode when you want more coverage. DOT and ECE P/J certification means it is tested for use in both configurations.
Built for commuting, touring, and changing weather, the Advant X combines a wide quick-release shield, hidden drop-down sun shield, Pinlock-ready fog control, and a washable X-Static® liner in an intermediate-oval fit.
Why Riders Choose the Full Forged
Full forged-carbon construction: 6K carbon shell with a 100% carbon chin bar—the key upgrade over versions with a painted or woven-carbon chin bar
True convertible design: one-hand 180° rotating chin bar with ECE P/J open-face and full-face certification
Touring-ready visibility: quick-release, scratch-resistant, UV-resistant main shield plus an integrated sun shield
Fog control included: Pinlock® 120XLT MaxVision™ insert is included
Comfort for long days: breathable, hypoallergenic X-Static® silver liner with laser-cut foam
Shell, Safety & Fit
6K carbon-fiber shell
100% carbon 180° rotating chin bar
DOT FMVSS 218 and ECE 22.06 certified
ECE P/J certified for open-face and full-face use
Intermediate-oval head shape
Approximate weight: 1550 g ± 50 g
Two shell sizes: XS–L and XL–3XL
Five EPS sizes for a more precise fit
Multi-density EPS and reinforced chin strap
Micrometric metal buckle and emergency-release system
Reflective safety patch and magnetic smart pull-tab
Shield & Ventilation
Quick-release main shield mechanism
Scratch-resistant and UV-resistant shield
Hidden, easy-remove internal sun shield
Pinlock® 120XLT MaxVision™ insert included
Channeled EPS airflow
Metal-covered chin and top vents
Adjustable exhaust ports
Comfort Features
Removable and washable X-Static® silver liner
Breathable, hypoallergenic construction
Laser-cut foam padding
Chin curtain included
Slim replacement cheek pads available separately
What’s in the Box
LS2 Advant X Carbon Full Forged helmet
Dark-smoke outer shield
Pinlock® 120XLT MaxVision™ insert
Carrying backpack
LS2 helmet box
Fit note: This helmet has an intermediate-oval internal shape. Measure around the widest part of your head, just above the eyebrows and ears, and compare the result with the LS2 size chart shown in the product images.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Extremely lightweight TCT-Ultra™ Composite shell provides superior strength and impact dispersal properties
CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride
Advanced multi-layer EPS provides superior energy absorption
Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification
Aero-tuned ventilation system features closeable intake vents on top help force cool air in, while exhaust vents maximize movement of hot air out of the helmet
Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside)
Strategically placed channels throughout the EPS foam provide increased airflow
KwikWick® III Comfort Liner features a moisture wicking fabric that keeps you cool and dry in warm weather, and warm in cool weather. Liner Kit is easily removable and washable. Optional Cheek Pads sold separately
KwikFit® 3D sculpted cheek pads accommodate most eyeglasses
Scorpion EXO’s face shield ratchet system pulls the shield securely against the eye port, ensuring a proper seal
EverClear® face shield offers state-of-the-art fog-free technology and 95% UV-A & UV-B protection
Optically superior face shield features a shatter resistant, Anti-Scratch hardened coating
FREE Additional Dark Smoke Everclear® fog-free face shield included. (Pinlock® face shields sold separately)
Tool-less face shield removal system
Comm-Ready speaker pockets allow for easily installation of your favorite Bluetooth® communication system speakers
Optional Thinner and Thicker cheek pads available to help optimize fit (sold separately)
Reflective material incorporated into the cheek pads for increased night time visibility
Included solid neoprene aero skirt (chin curtain) helps reduce wind noise
Speaker pocket size: 50mm/5mm (round)
2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam
DOT FMVSS No. 218 Certified/ ECE 22.06 Certified
5-Year manufacturer's warranty
HELMET SIZING CHART
SIZE
INCHES
CM
HAT SIZE
X-Small
20 7/8 - 21 1/4
53 - 54
6 5/8 - 6 3/4
Small
21 5/8 - 22
55 - 56
6 7/8 - 7
Medium
22 7/16 - 22 3/4
57 - 58
7 1/8 - 7 1/4
Large
23 1/8 - 23 5/8
59 - 60
7 3/8 - 7 1/2
X-Large
24 - 24 3/8
61 - 62
7 5/8 - 7 3/4
2X-Large
24 3/4 - 25 3/16
63 - 64
7 7/8 - 8
3X-Large
25 9/16 - 26
65 - 66
8 1/8 - 8 1/4
The HJC i91 is a versatile modular motorcycle helmet designed for daily commuting, touring, and cruising. Its advanced polycarbonate composite shell and adjustable chin bar balance protection, comfort, and convenient airflow. A wide Pinlock Ready HJ 33 shield, internal multistep sun visor, glasses grooves, and communication readiness make it a practical choice for long days on the road.
Key Features
Advanced Polycarbonate Composite Shell with adjustable polycarbonate chin bar
Lightweight, comfortable fit shaped with CAD technology
Four shell sizes for a slimmer profile and better fit
Pinlock Ready HJ 33 shield with 99 percent UV protection and a scratch resistant coating
Dynamic multistep internal sun visor with a scratch resistant coating
High performance ventilation designed to move air through the helmet
Fully removable interior for easier cleaning
Interchangeable cheek pads across all helmet sizes
Glasses grooves for riders who wear eyewear
Double D ring retention system
Ready for SMART HJC 21B and 50B Bluetooth systems, sold separately
DOT approved
Included in the Box
Pinlock anti fog lens insert
Shield Compatibility
HJ 33 Pinlock Ready clear shield
HJ 33 RST mirrored Pinlock Ready shield
HJ V12 sun visor
Helmet Sizing
XS
54 to 55 cm
S
55 to 56 cm
M
57 to 58 cm
L
58 to 59 cm
XL
60 to 61 cm
2XL
62 to 63 cm
3XL
64 to 65 cm
4XL
66 to 67 cm
5XL
68 to 69 cm
Measure around the widest part of your head, just above the eyebrows and ears. Helmet fit can vary by head shape, so a professional fitting is recommended whenever possible.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The ScorpionEXO Ryzer Solid is a feature packed full face touring helmet for riders who want modern protection, clear vision, and everyday comfort without moving into a premium price bracket. Its advanced polycarbonate shell and dual density EPS are backed by both DOT FMVSS 218 certification and ECE 22.06 approval.
Built for Everyday Riding
Advanced polycarbonate shell engineered for strength, manageable weight, and impact energy displacement
Three shell sizes for a more proportional fit throughout the size range
Dual density EPS liner for progressive energy management
Clear MaxVision Pinlock ready face shield with an anti scratch coating and 95 percent UV A and UV B protection
EverClear SpeedView retractable internal sun visor with anti fog coating on both surfaces
Ellip Tec II shield mechanism provides a secure seal and fast, tool free shield changes
Aero tuned intake and exhaust ventilation helps move cool air through the helmet
Dual position mouth vent can direct airflow toward the shield or into the helmet
Comfort and Convenience
KwikWick C antimicrobial, moisture wicking comfort liner is removable and washable
KwikFit contoured cheek pads accommodate many common eyeglass styles
Emergency release cheek pads assist trained emergency personnel
Built in speaker pockets accommodate most motorcycle communication system speakers
Double D ring retention system
Breath deflector and aero skirt help manage shield fogging, airflow, and wind noise
Included: Clear MaxVision Pinlock ready face shield, breath deflector, aero skirt, and soft helmet bag. The Pinlock anti fog insert is sold separately.
Sizes and colors: Offered in Matte Black, Gloss Black, and Gloss White with sizes varying by color. Scorpion uses three shell sizes across the range to improve overall proportion and comfort.
Warranty: Covered by ScorpionEXO's five year manufacturer warranty.
Fit note: A helmet should fit evenly snug without painful pressure points and should resist rolling on the head when the chin strap is secured. Visit Eagle Leather for professional sizing help whenever possible.
The Shoei Neotec 3 is a premium modular touring helmet engineered for riders who want full face protection, convenient flip up access, refined highway aerodynamics, strong ventilation, and seamless communication integration. Shoei developed the shell, chin bar, shield, sun visor, interior, and airflow system as one complete platform rather than treating the modular mechanism as an add on.
What improved over the Neotec II
The Neotec 3 is a genuine redesign rather than a cosmetic refresh. Shoei retained the familiar modular touring concept, then revised the systems that most directly affect visibility, airflow, wind management, everyday operation, and communication integration.
New CNS 3C shield system: The Neotec II used the CNS 3 shield with side mounted operation. The Neotec 3 moves to a newly developed CNS 3C shield with a center locking tab. The new shape improves sealing around the eye port, reduces optical distortion, and allows balanced opening with either hand.
Improved shield venting: The new shield mechanism includes a micro opening position that lets the rider introduce a controlled amount of airflow for defogging without opening the shield fully.
Larger internal sun visor: The QSV 2 visor extends about 5 millimeters farther than the QSV 1 used in the Neotec II. This provides greater coverage and reduces distracting light entering below the visor.
Upgraded ventilation: Shoei redesigned the closable brow and chin intakes, internal air channels, and rear extraction points to increase airflow. The chin intake also gains a removable insect filter that makes debris easier to clean out.
Refined wind and noise management: The reshaped shell, improved shield seal, revised lower edge, and integrated spoiler work together to create cleaner airflow and better noise isolation than the previous generation. Helmet fit, motorcycle windscreen, and riding position will still affect the sound a rider experiences.
New communication integration: The Neotec II was designed around the Sena SRL and SRL2. The Neotec 3 uses Shoei Comlink integration for the optional Sena SRL3, allowing the controls, speakers, microphone, and battery to fit neatly into the helmet with minimal external bulk.
Updated chin strap hardware: A new stainless steel micro ratchet is lighter, smoother to operate, and designed to provide more consistent adjustment than the previous closure.
Improved glove friendly operation: The flip up release, shield control, ventilation controls, and sun visor slider were shaped for easier use while wearing riding gloves.
Weight comparison: The added refinement does not make the complete helmet lighter. Shoei lists the Neotec 3 at approximately 4.15 pounds in size Medium compared with approximately 4.09 pounds for the Neotec II. The difference is about one ounce.
Refined modular system
The chin bar opens with a large glove friendly release and rotates smoothly upward for fuel stops, conversations, and other stationary use. The locking mechanism uses durable metal components and is designed to close with a positive, reassuring engagement.
Shell and impact management
Advanced Integrated Matrix shell combines fiberglass and organic fibers
Multi density EPS liner manages impact energy across different zones
Emergency Quick Release System supports easier cheek pad removal by trained responders
DOT approved for street use
Wind tunnel developed aerodynamics
The shell shape, chin bar, lower edge, and integrated spoiler were tested together in Shoei’s wind tunnel. The goal is balanced airflow, reduced lift, and stable tracking during long highway rides. Attention to sealing and lower edge turbulence also helps create a more controlled cockpit environment.
Touring focused ventilation
A closable chin intake directs air toward the shield area, while the upper intake moves cooling air through channels in the EPS liner. Rear exhaust outlets help release warm air. The front intake includes a removable insect filter for easier maintenance.
CNS 3C shield system
Optically accurate curvature helps reduce distortion
Center locking tab creates even pressure against the eye port seal
Micro opening position provides controlled airflow for defogging
Tool free removal makes shield changes and cleaning easier
Pinlock anti fog insert is included
Blocks more than 99 percent of harmful ultraviolet light
QSV 2 internal sun visor
The internal sun visor provides about 5 millimeters more coverage than the prior generation. It deploys with a smooth external slider and retracts fully when not needed. Its dedicated storage space preserves protective EPS thickness around the forehead.
Comfort and secure closure
The three dimensional interior is removable, washable, and designed to support the head evenly. Replaceable cheek pads and center pads allow fit adjustment and long term refresh. A stainless steel micro ratchet closure gives riders fast, consistent adjustment while maintaining a secure connection.
Shoei Comlink communication integration
The shell is prepared for the optional Sena SRL3 system. This purpose built installation keeps the control unit, speakers, microphone, and battery neatly integrated with minimal external hardware.
Included with the helmet
Pinlock EVO anti fog insert
Breath guard
Helmet bag
The Creators of the original bad-ass Covert Motorcycle Helmet has now developed a full-face version, the Covert FX Carbon!The Covert FX displays the same edgy style and function that is expected from the ScorpionEXO Covert Series. However stylish the details may be, they have important function. Each helmet is carefully hand crafted using the latest 3K Carbon Fiber which provide superior strength and extreme light weight. The low-profile shell has been aerodynamically tuned for motorcycle riding, minimizing both lift and turbulence for a smoother, quieter, and more stable ride.
SHELL:
SHELL
Extremely lightweight TCT-U™ 3K Carbon Fiber shell provides superior strength and impact dispersal properties
CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride
Advanced multi-layer EPS provides superior energy absorption
Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification
COMFORT:
Aero-tuned ventilation system features closeable intake vents on top help force cool air in, while exhaust vents maximize movement of hot air out of the helmet
Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside)
Strategically placed channels throughout the EPS foam provide increased airflow
KwikWick® III Comfort Liner features a moisture wicking fabric that keeps you cool and dry in warm weather, and warm in cool weather. Liner Kit is easily removable and washable. Optional Cheek Pads sold separately
KwikFit® 3D sculpted cheek pads accommodate most eyeglasses
VISION:
ScorpionEXO’s face shield ratchet system pulls the shield securely against the eye port, ensuring a proper seal
EverClear® face shield offers state-of-the-art fog-free technology and 95% UV-A and UV-B protection
Optically superior face shield features a shatter resistant, Anti-Scratch hardened coating
FREE Additional Dark Smoke Everclear® fog-free face shield included. (Pinlock® face shields sold separately)
Tool-less face shield removal system
Comm-Ready speaker pockets allow for easily installation of your favorite Bluetooth® communication system speakers
Optional Thinner and Thicker cheek pads available to help optimize fit (sold separately)
Reflective material incorporated into the cheek pads for increased night time visibility
Included solid neoprene aero skirt (chin curtain) helps reduce wind noise
ADDITIONAL SPECIFICATIONSWeight: ± 1,348 grams / 2.9 lbs. (size medium)
Speaker pocket size: Height 50mm x Width 50mm x Depth 7.5mm
2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam
DOT FMVSS No. 218 Certified/ ECE 22.06 Certified
5 Year Warranty
The Shoei GT Air 3 is a premium full face touring helmet built for riders who want long distance comfort, quiet air management, integrated sun protection, and modern communication capability without giving up a sporty feel. Shoei refined nearly every major system from the previous GT Air 2, then validated the design in its in house wind tunnel.
What changed from the GT Air 2
The reshaped shell and spoiler reduce aerodynamic drag while improving stability at highway speed. Shoei reports approximately 6 percent less wind resistance and 11 percent less lift than the GT Air 2. The ventilation system places the intake ports directly in the air stream and uses internal EPS channels to move fresh air through the helmet more effectively. The center locking shield system is easier to operate with either hand, and the internal sun visor provides about 5 millimeters more coverage.
Shell and impact management
Advanced Integrated Matrix shell combines fiberglass and organic fibers for strength with controlled elasticity
Multi density EPS liner is tuned to manage impact energy across different areas of the helmet
Emergency Quick Release System allows trained responders to remove the cheek pads more easily
DOT approved for street use
Aerodynamics and ventilation
The compact shell shape, molded rear spoiler, and carefully controlled surface transitions were developed to reduce buffeting and lift in real riding positions. A large chin intake and upper intake feed air into channels molded through the EPS liner. Warm air exits through the rear exhaust system. The front vent includes a removable insect filter for easier cleaning.
CNS 1C shield system
Optically accurate shield design helps minimize distortion
Blocks more than 99 percent of harmful ultraviolet light
Center locking tab provides an even seal around the eye port
Micro opening position allows controlled airflow when extra defogging is needed
Tool free shield removal makes cleaning and replacement simple
Pinlock EVO anti fog insert is included
QSV 2 internal sun visor
The enlarged internal sun visor offers about 5 millimeters more coverage than the prior design. It deploys with a smooth external slider and retracts fully into the shell when not needed. The visor is designed to preserve the helmet’s protective liner rather than reducing EPS thickness around the eye area.
Comfort for long rides
The removable and washable three dimensional interior uses moisture managing fabrics in high contact areas. Replaceable center pads and cheek pads allow fit tuning over the life of the helmet. A stainless steel micro ratchet closure provides secure, repeatable adjustment, while the 21 millimeter chin strap helps spread pressure comfortably. A breath guard and chin curtain help manage fog and lower edge turbulence.
Communication ready
Shoei Comlink integration provides a clean mounting area for the optional Sena SRL3 communication system. The helmet remains streamlined when the system is installed, with controls and speakers positioned specifically for this shell.
Included with the helmet
Pinlock EVO anti fog insert
Breath guard
Chin curtain
Helmet bag
Approximate weight: 3.91 pounds in size Medium. Actual weight varies by shell and size.
SHOEI RF SR 2 Full Face Motorcycle Helmet
The SHOEI RF SR 2 takes the proven everyday performance of the original RF SR and refines the areas riders notice most on the road. Its updated aerodynamic profile improves stability at speed, larger vent controls make airflow easier to adjust with gloves, and the renewed interior provides a softer, more comfortable feel for daily commutes and longer rides.
What Has Improved Over the RF SR
More refined aerodynamics: The revised shell shape is designed to reduce drag and lift compared with the previous model, helping the helmet feel more stable and less tiring at highway speeds.
Better ventilation control: The familiar three intake and two exhaust vent layout now uses larger, easier to operate shutters. Partial open positions let riders fine tune airflow instead of choosing only fully open or fully closed.
Updated interior comfort: The removable and washable 3D interior uses soft brushed fabric for a smoother feel against the skin. Optional cheek pads and center pads allow the fit to be adjusted more precisely.
Current safety certification: The RF SR 2 meets Snell M2025D and DOT FMVSS No. 218 standards.
Proven Features That Carry Forward
AIM+ shell construction: Multiple layers of fiberglass and organic fibers provide a strong balance of impact performance, flexibility, and manageable weight.
CWR 1 shield system: The optically clear shield works with the QR E base plate for quick shield changes and precise shield adjustment.
Pinlock EVO lens included: The supplied DKS301 insert helps resist fogging in cold, damp, or changing riding conditions.
Adjustable 3D interior: The center pad and cheek pads can be removed for washing or replaced with optional thicknesses to personalize the fit.
Balanced road weight: Approximately 3.49 pounds or 1,593 grams in a medium solid color helmet.
Made for Everyday Street Riding
The RF SR 2 is designed for riders who want premium SHOEI construction without moving into a race focused or touring focused helmet. It is a strong choice for commuting, weekend rides, and extended highway travel, with practical improvements that make the helmet easier to live with on every ride.
Specifications
Helmet type: Full face street helmet
Shell construction: AIM+ Advanced Integrated Matrix Plus multi fiber
Ventilation: Three intake vents and two exhaust vents with adjustable shutters
Shield: CWR 1 with QR E base plate system
Included anti fog lens: Pinlock EVO DKS301
Interior: Adjustable, removable, and washable 3D comfort system
Certifications: Snell M2025D and DOT FMVSS No. 218
Approximate weight: 3.49 pounds or 1,593 grams for size medium in a solid color
The LS2 Assault III Warrior Krome combines bold gloss black and Krome silver graphics with the everyday performance needed for city streets and highway riding.
Its aerodynamic Kinetic Polymer Alloy shell is paired with multi density EPS for dependable protection, while a large upper air intake and channelled EPS promote steady airflow. The wide vision face shield provides a clear view of the road and includes a Pinlock 70 MaxVision insert to help prevent fogging. An internal sunshield offers convenient glare protection when conditions change.
Color matched vent panels complement the detailed Warrior graphic. Inside, the removable and breathable liner is designed for lasting comfort and easy cleaning.
Safety and Construction
Meets DOT FMVSS 218 and ECE 22.06 safety standards
Kinetic Polymer Alloy shell construction
Multi density EPS impact liner
Emergency release system
Reinforced chin strap
Micrometric buckle
Approximate weight of 1600 grams plus or minus 50 grams
Three shell sizes for a more proportional fit
Shield and Visibility
Wide vision face shield
Scratch resistant and UV resistant shield treatment
Quick release shield system
Pinlock 70 MaxVision insert included
Internal sunshield with an easy remove mechanism
Double injection shield seal
Shield button lock
Comfort and Ventilation
Removable, washable, and breathable comfort liner
Hypoallergenic and antibacterial interior
Adjustable top and chin vents
Rear exhaust ports
Channelled EPS for improved airflow
Breath deflector
Magnetic chin curtain
Included
Elastic helmet carrying bag
Pinlock 70 MaxVision insert
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
LS2 Horizon II Helmet
DESCRIPTION
Experience the versatility of the Horizon II modular helmet your ideal companion for both city streets and open highways. Designed for comfort and safety, it features an upgraded locking system for the 90 flip-up chin guard, ensuring secure and effortless operation.
SHELL
Meets or exceeds DOT FMVSS 218 and ECE 22.06
ECE P and J certified for both open-face and full-face use
Weight: 1750g +/- 50g
Sizes: XS3XL
Constructed using Kinetic Polymer Alloy (KPA)
3 Shells / 5 EPS / 7 Liners / 3 Cheek Pads
COMFORT
Premium removable and washable technical fabric liner
Moisture-wicking, hypoallergenic, and antibacterial properties
3D laser-cut cheek pads provide a precise, all-day fit
SHIELD
Optically correct A-Class Polycarbonate face shield for superior clarity
Anti-scratch and UV-resistant coating
Integrated drop-down sunshield with easy-remove system
Breath deflector included
SECURITY
Micrometric quick-release buckle
Reinforced chin strap for added durability
Multi-density EPS for advanced impact protection
Emergency Release Cheek Pads
VENTILATION
Fully adjustable multi-port dynamic ventilation system
Flow-through airflow with ported EPS channels
Designed to keep riders cool across varying conditions
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Aerodynamic shell design creates a quiet and stable ride
Scratch resistant, polycarbonate anti-fog shield
Drop down sun visor makes the helmet versatile in all lighting conditions
Intake and exhaust vents engineered for ultimate temperature regulation
Chin vent design improves interior airflow and reduces shield fogging
Fully removable, polyester moisture wicking liner and cheek pads
Injection molded polycarbonate shell
Additional replacement parts & accessories
DOT APPROVED W/ MULTI DENSITY EPS FOAM
Jackal Satin Pink Includes RST Pink Shield
Clear shield included in box
The LS2 Rapid III is a streamlined full-face helmet developed for commuting, touring and everyday road use. Its aerodynamic HPTT shell keeps the design practical and lightweight, while three shell sizes help deliver better proportions throughout the size range.
Features and Rider Benefits
HPTT shell balances durability, performance and manageable weight for daily riding
Three shell sizes—2XS through S, M through L, and XL through 3XL—help provide a more proportional fit
Pinlock 70 MaxVision-ready shield allows an optional anti-fog insert to be fitted
Scratch-resistant and UV-resistant quick-release shield is easier to remove for cleaning or replacement
Top and chin vents, rear exhaust ports and channeled EPS help move air through the helmet
Removable, washable and breathable comfort liner supports easier care
Hypoallergenic and antibacterial interior materials with a chin curtain improve everyday comfort
Micrometric buckle, reinforced chin strap and metal security plate provide convenient, dependable closure
Manufacturer-listed weight is approximately 1,350 g, plus or minus 50 g. Weight can vary by size and configuration.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The LS2 Assault III Solid is a full-face street helmet for commuting and longer rides, with an internal sun visor and included Pinlock anti-fog insert for everyday versatility.Shell and ProtectionA Kinetic Polymer Alloy shell surrounds multi-density EPS. The Assault III meets DOT FMVSS 218 and ECE 22.06, uses three shell sizes across XS-3XL, and has a manufacturer-listed weight of 1600 g +/- 50 g. An emergency-release system, reinforced chin strap and micrometric buckle complete the protective design.Shield and Sun VisorThe wide-vision outer shield is scratch- and UV-resistant, with a quick-release mechanism, button lock and double-injection seal. An internal sunshield adds convenient shade. A Pinlock 70 MaxVision insert is included.Airflow and ComfortTop and chin vents work with rear exhausts and channeled EPS to move air through the helmet. The breathable, hypoallergenic, antibacterial liner is removable and washable. A magnetic chin curtain and breath deflector help manage airflow around the face.Included AccessoriesIncludes an elastic carrying bag and Pinlock 70 MaxVision insert.Size Chart
Size
Head circumference (cm)
X-Small
53-54
Small
55-56
Medium
57-58
Large
59-60
X-Large
61-62
2X-Large
63-64
3X-Large
65-66
Measure around the widest part of your head above the eyebrows, keeping the tape level. Use the chart as a starting point and try the helmet on with the strap secured. The fit should be snug and even without painful pressure.Warranty SupportKeep your purchase receipt and contact Eagle Leather for help with an LS2 warranty claim. Coverage is subject to LS2 USA's applicable terms.
The Assault III delivers bold street styling with the everyday features riders use most. Its Kinetic Polymer Alloy shell combines with multi-density EPS, an emergency-release system, and a reinforced chin strap for dependable protection. The wide-vision, quick-release shield is scratch- and UV-resistant, backed by an internal sunshield and an included Pinlock 70 MaxVision insert. Color-matched vent panels and pre-installed colored shields give each graphic a distinctive finish, while the removable, breathable liner and magnetic chin curtain enhance comfort. Meets ECE 22.06 and DOT FMVSS 218 standards.
WHAT IS IN THE BOX● Elastic carrying bag● Pinlock 70 MaxVision insert
SHELLSafety Standard● ECE 22.06 and DOT FMVSS 218Material● Kinetic Polymer Alloy (KPA)Weight● 1600g +/- 50gSizes● XS-S / M-L / XL-3XL - Sizes (3 Shells)EPS● XS / S / M / L / XL-3XL - 5 EPSLiners● XS / S / M / L / XL / 2XL / 3XL - 7 LinersCheek Pads● XS-XL / 2XL / 3XL - 3 Cheek Pads
COMFORT● Extra-comfort liner● Removable, washable, and breathable● Hypoallergenic and antibacterial
SHIELD● Anti-scratch and UV-resistant● Wide-vision shield● Quick-release system● Pinlock 70 MaxVision insert included● Sunshield with easy-remove mechanism● Double-injection shield seal● Two shield versions available: Dark Electron and Light Electron
SECURITY● Micrometric buckle● Emergency release system● Reinforced chin strap● Magnetic chin curtain● Shield button lock
VENTILATION● Channeled EPS● Top and chin vents with colored panels; color depends on graphic● Exhaust ports with colored panels; color depends on graphic● Breath deflector
Fly Sentinel Helmet Recon is built for street riders who want protective coverage, clear vision, ventilation, and practical day-to-day comfort in one helmet.ECE Approved / DOT Approved (FMVSS218 Approved)Durable and lightweight polycarbonate blend shellDual density EPS liner – two layers of EPS, one softer, one slightly harder combine to provide a more progressive impact absorption for different levels of impactVisionOptically superior clear face shield with anti-fog coating and durable hard coating for scratch resistanceTinted drop down inner sun shield. 100% UVA/B protection up to 400 nanometersShield lock provides piece of mindEasy shield changes quick, secure and tool less removal and installationComfort / LinerQwick - Dry® comfort liner and cheeks pads. Hydrophilic liner absorbs sweat and is perforated to provide plenty of ventilationSpeaker pockets built into the EPS for Bluetooth/Comm systemsRemovable, washable interior and removable chin curtainVentilationHigh-Flow ventilation system, 6 adjustable intake vents, 5 exhaust ventsRemovable breath deflector helps direct airflow upwards across the shield for fog free visionSoft fleece helmet bagOptional mirror & tinted shields availableAccessoriesOptional tinted and mirror shields availableWhy riders choose it
Impact-management shell and EPS construction support street protection
Ventilation and removable comfort components help manage longer rides
Integrated vision features reduce the need to stop as light or conditions change
FLY adult helmet size chart
Size
Head circumference
Centimeters
X-Small
20.5–21.25 in.
53–54 cm
Small
21.25–22 in.
55–56 cm
Medium
22–23 in.
57–58 cm
Large
23–23.75 in.
59–60 cm
X-Large
24–24.5 in.
61–62 cm
2X-Large
24.5–25.25 in.
63–64 cm
How to measure: Wrap a soft tape around the widest part of the head, approximately one inch above the eyebrows and over the largest portion at the back. A new helmet should feel evenly snug without painful pressure points.Rider-informed FAQsHow do I choose the correct size?Measure the widest part of the head above the eyebrows and compare with FLY’s street-helmet chart. A new helmet should feel evenly snug without isolated pressure points; it should not rotate independently of the head.Can I install a communicator?The listed speaker pockets are intended to simplify Bluetooth or intercom installation. Confirm speaker thickness and microphone routing for your specific system.How should I manage fogging?Use the vents and breath deflector as designed, keep the shield clean, and use the compatible anti-fog or Pinlock option only when the specifications identify one.
The Strobe II modular helmet features a Kinetic Polymer Alloy (KPA) shell, offering state-of-the-art energy managing flexibility. The Strobe II meets or exceeds the ECE 22.06 rotational energy management criteria using LS2’s proprietary Advanced Rotational Energy Management (AREM) technology. ECE homologated as both an open face and full-face (ECE P/J rated), this helmet offers amazing flexibility and is able to be used with the chin bar down for highway riding, or up when circulating a parking lot, stopped to take a photo, or talking to your riding buddies at a rest stop. A convenient built-in, drop-down sun shield adds to this flexibility and makes it a breeze to get the shield up and out of the way when entering a tunnel or shadowed area. Removeable, washable liner with special flex-crown system is super comfortable and easy to keep fresh.
Features:
Kinetic Polymer Alloy (KPA) shell offers better energy managing flexibility
Intermediate Oval fit
Modular helmet
Quick release chin strap
Built-in drop-down sun shield
Clear Pinlock-ready face shield (Pinlock sold separately)
Moisture-wicking helmet liner and cheek pads
Meets ECE 22.06 Rotational Energy Management requirements using LS2 AREM technology
Meets or exceeds ECE 22.06 and DOT FMVSS standards
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The new Covert 2 Model is a 2-piece open-face helmet that includes a removable mask for style. This new 2-piece design helps reduce wind noise that was common with the original version, and features a much more aggressive look. Incorporating the latest comfort liner materials for moisture wicking and improving the shape of the internal EPS Foam, the Covert 2 will fit and feel better than ever before. The new helmet also features a built-in communication port, allowing riders to easily connect their communication device of choice.The Covert 2 Helmet from Scorpion EXO® is the perfect choice for those who demand superior comfort and performance. With its improved design, wind noise reduction, and built-in communication port, this is the ultimate open face helmet for riders looking for a comfortable and stylish ride. Get the Covert 2 Helmet and experience the superior craftsmanship and advanced features that Scorpion EXO® is known for.
LS2 Helmets Stream II Solid Helmet W/ Sunshield
The LS2 Stream II Solid Helmet features an aerodynamic, sport styled shell made from LS2’s proprietary Kinetic Polymer Alloy (KPA). KPA uses nanotechnology to blend microscopic aramid fibers with a high-end polymer and allows for amazing energy managing performance with managed flexibility that absorbs energy without the ricochet effect of inferior materials.
The Stream II meets the ECE 22.06 rotational energy management specifications using Advanced Rotational Energy Management Technology (AREM), another LS2 proprietary process. The rear spoiler allows for dynamic flow-through ventilation, plus the 3D laser cut foam in the cheek pads, removeable, washable liner with special flex-crown comfort system is super comfortable and easy to keep fresh. 3 shells and 5 energy absorbing EPS liners make for a fit that is nothing short of amazing. The overall finish and performance sets the Stream II at the forefront of full-face motorcycle helmets.
Features:
Intermediate oval fit
3 shells
5 energy absorbing EPS liners
High tech, aerodynamic, sport styled Kinetic Polymer Alloy shell
AREM rotational energy management meets ECE 22.06 standards
Dynamic, flow-through ventilation
Quick release chin strap
Class A polycarbonate Pinlock ready face shield (Pinlock sold separately)
Meets or exceeds ECE 22.06 and DOT FMVSS standards
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
SPECS
Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort
using advanced CAD technology.
Urban Daily Helmet for Commuting.
“ACS” Advanced Channeling Ventilation System: Full front-to-back airflow flushes heat and humidity up and out.
Pinlock Pin Prepared HJ-34 Shield: Provides 99% UV protection; Wide shield enhanced visibility.
RapidFire™ Shield Replacement System: Simple and secure shield ratchet system provides ultra-quick, tool-less shield replacement.
Aerodynamic 3D Shield Design: Reduces the wind turbulence and wind blowing onto the face area.
Integrated Sun Visor: Black Dark Smoke sun shield deploys quickly and easily; Better peripheral vision; Anti-Scratch coated.
New Easy-To-Use Sun Visor Lever: operates smoothly and quietly.
Interior provides enhanced moisture-wicking and quick drying function.
Crown and Cheek pads: Removable and washable.
Cheek pads: interchangeable throughout all shell sizes.
Glasses Grooves: Accommodates riders who wear eyeglasses and sunglasses.
Speaker pockets: for Bluetooth communication.
Ready for Bluetooth (Bluetooth sold separately).
HJC i30 Helmet Solid Color Gloss White,Wine,Gloss Black,Matte BlackSize X-Small,Small,Medium,Large,X-Large,2X-Large
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZW
INCHES
X-Small
53-54
6 5/8 – 6 3/4
20 7/8 – 21 1/4
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
X-Large
61-62
7 5/8 – 7 3/4
24 – 24 3/8
2X-Large
63-64
7 7/8 – 8
24 3/4 – 25 1/4
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The SRT-Modular combines first class and grit to produce a helmet that gets you stoked to hit the streets. With class 1 optics in a flip-up Panovision shield, and lightweight fiberglass composite construction, the SRT-Modular is the obvious choice when you're ready to tear down the long roads.
The new SRT-Modular combines the quality construction of the SRT – fiberglass shell, recessed EPS speaker pockets, a broad range of sizing options and Panovision Class 1 optics – and adds in the versatility and convenience of a modular helmet. All the protection of a quality full-face when you need it, as well as the ease and accessibility of an open-face for when you want to face the world head-on. SRT – putting the Sport back in Sport Touring. Includes clear faceshield.
SPECSSHIELD TYPE PANOVISION SHIELD WITH CLASS 1 OPTICSCONSTRUCTION MODULAR, FLIP-UP STYLE HELMETPRODUCT WEIGHT DOT: 1750G +/- 50G (SIZE M)|ECE: 1715G +/- 50G (SIZE M)ELECTRONICS COMPATIBILITY RECESSED EPS SPEAKER POCKETSCERTIFICATION DOT (US)
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Features
Wind protector included
Double D retention system
Shell
Carbon-Aramid fiber
Collarbone safe profile
5-density EPS
Ventilation
Adjustable air vents
1 wide rear extractor and 5 front vents
Aerodynamics
Optimized for all riding positions
Integrated spoiler
Shell shape designed to reduce turbulence
Interior
2Dry: instant sweat absorption
Ritmo fabric cheek pads to facilitate putting on/taking off the helmet, with cheekbone area in Shalimar fabric to ensure stability at high speed
Cheek pads safety release system
Shalimar fabric crown pad for a soft and gentle touch
Embracing neck roll profile
Fit especially designed to allow wearing glasses
Ready for AGV ARK communication system
Ritmo fabric neck roll and synthetic leather with high abrasion resistance and water-resistant properties
Microsense: premium skin comfort
Reflective inserts
Removable and washable interiors
Removable nose guard
Sanitized: antibacterial protection
Visor
100% Max Vision Pinlock (120) included
190 horizontal and 85 vertical field of view
Anti-scratch
Micro-opening system
Metal visor mechanism
Multistep visor mechanism
Extra Quick Release System (XQRS)
Visor lock system
Optic class 1
AGV K3 Helmet
In AGV's constant pursuit of perfection, they've elevated the already iconic K3 helmet to a whole new level of performance. The aggressively styled shell is designed to maximize aerodynamic performance and optimized for stability in all riding positions, so you'll slice through the air with ease no matter how you ride. With a massive field of view, anti-fog Pinlock lens equipped face shield and drop down sun shield you'll be able to keep your eyes on the road ahead with ease in any weather condition. The plush, quick-drying and thoughtfully constructed interior is available in three shell sizes to help you get the best possible fit. The K3 from AGV is a shining example of premium comfort and top level safety packaged in a sleek and affordable package.
Shell:
High Resistance Thermoplastic
Multi-density EPS developed in 4 sizes
3 shell sizes
Shell shape designed to maximize aerodynamic performance and optimized for all riding positions
Shield:
Anti-scratch
100% Max Vision Pinlock (70) included
190° horizontal field of view
Anti-scratch sun visor, removable without using tools
Micro-opening system
Multistep visor mechanism
Patented Extra Quick Release System
Visor step for city position
UV protective
Ventilation:
1 rear extractor
4 front vents
Adjustable air vents
Interior:
Removable and washable interiors
2Dry finish on interior padding allows for instant sweat absorption
Cheek pads interchangeable between all sizes
Glasses-friendly design
Fresh and smooth breathable fabric
No stitches in sensitive areas
Embracing neck roll profile
Ready for generic communication system
Wind protector included
Safety:
DOT and ECE 22.06 certified
Collarbone safe profile
Steel micrometric retention system
The LS2 Rebellion Half Helmet combines a timeless cruiser profile with modern comfort, protection, and convenience. Its lightweight Kinetic Polymer Alloy shell uses a roll off resistant design and multi density EPS to provide a secure, confidence inspiring fit without unnecessary bulk.
An integrated two stage sunshield offers quick coverage when lighting conditions change. The shield is scratch resistant and UV resistant, while the removable peak lets riders customize the look and coverage. Adjustable multi port ventilation works with ported EPS to keep air moving, and the moisture wicking technical fabric liner removes easily for washing.
Features
Meets DOT FMVSS 218
Lightweight Kinetic Polymer Alloy shell
Approximate weight of 948 grams, plus or minus 50 grams
Two shell sizes for a more proportionate fit
Multi density EPS impact liner
Roll off resistant half helmet design
Built in two stage drop down sunshield
Scratch resistant and UV resistant sunshield
Removable peak
Fully adjustable multi port ventilation
Removable and washable moisture wicking liner
DOT approved quick release chin strap
Includes carrying bag
Sizing
Measure around the widest part of the head, approximately one inch above the eyebrows.
X Small: 53 to 54 cm
Small: 55 to 56 cm
Medium: 57 to 58 cm
Large: 59 to 60 cm
X Large: 61 to 62 cm
2X Large: 63 to 64 cm
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
CLASSIC DESIGN MEETS MODERN TECHNOLOGYThe Cavalry 2 is a cutting edge smart helmet that blends classic half helmet styling with modern communication technology. The composite fiberglass shell and EPS lining provide protection and comfort, while the integrated communication system, speakers, and microphone keep the rider connected when they're on two wheels. The Cavalry 2 is the pinnacle of DOT certified half helmet protection, that is integrated with the latest innovations in communication technology.
KEY FEATURES
Mesh 2.0 Intercom™Robust & reliable communication network.
Intercom Range up to 0.8 milesMaximum distance operating within optimal conditions.
Built-In Speakers & MicIntegrated 40mm premium speakers and a microphone
Multi-Channel CommunicationCommunicate with different groups across 9 channels.
Multi-Language Voice PromptsSpoken audio cues from the headset across 3 languages: English, Spanish, and French.
Quick ChargingSignificant reduction in battery charge time.
Over The Air Firmware UpdatesKeep devices updated through the Sena Motorcycles App.
Sena Smartphone AppsAllow you to configure device settings, access the User's Guide, and more.
COMFORT AND SAFETY FOR THE LONG ROUTE
The Cavalry 2 feels like an extension of the body, providing all-day comfort and protection. The shell is constructed from a durable and lightweight composite fiberglass and lined with a high-quality EPS foam for robust protection and comfort. The tried and true double D-ring chin strap is padded for a comfortable and secure fit. With its premium materials, fit, and finish the Cavalry 2 ensures long-lasting comfort and safety.
MESH INTERCOM CONNECTIVITY
The Cavalry 2 features Mesh Intercom for rider-to-rider communication. Mesh Intercom brings robust, reliable connections and flexible intercom message routing with significant enhancements to Sena’s Mesh algorithm. Mesh offers an unprecedented level of intercom audio quality with two Mesh settings, Multi-Channel Open Mesh Intercom™ and Group Mesh Intercom™.Open Mesh offers a simple, single push of a button to click-to-connect to the Mesh intercom network. With a simple push of the Mesh Intercom Button, the Cavalry 2 will connect to any other Sena Mesh headset, allowing to talk to another rider up to 0.8 miles apart. The Open Mesh Intercom features the industry’s first Mesh Intercom™ Channel System which allows users to switch between nine channels when operating in Open Mesh mode.For a private group conversation, Cavalry 2 also offers Group Mesh Intercom mode. Group Mesh supports a single, private group for up to 24 participants and the same range as Open Mesh. To ensure privacy, only invited users can join the Group Mesh chat.
AN UNPARALLELED AUDIO EXPERIENCE WHILE RIDING
The Cavalry 2 features Sena's Advanced Noise Control™, which reduces wind and road noise when talking through Mesh Intercom to other riders. With the microphone hidden away in the helmet, riders can talk while riding with a clear view of the road.
SPECIFICATIONSWEIGHT950±30 g (M size)
HELMETSize: S / M / L / XL / XXLColor: Matte BlackComposite fiberglass shellDouble D-Ring Chinstrap
MESH NETWORKMesh 2.0 Intercom™ Technology
BLUETOOTHBluetooth 5.2Headset Profile (HSP)Hands-Free Profile (HFP)Advanced Audio Distribution Profile (A2DP)Audio Video Remote Control Profile (AVRCP)
INTERCOMWorking Distance:- Mesh Intercom™: up to 0.8 miles in open terrain
Supports up to:- Open Mesh Intercom: virtually limitless- Group Mesh Intercom: 24 riders
Supports Channels:- Open Mesh Intercom: 9 channels
AUDIONoise Cancellation: Advanced Noise Control™Codec: Built-in SBC Codec
BATTERYTalk Time: 18 hoursCharging Time: 2.5 hoursType: Lithium Polymer Battery
TEMPERATUREOperating Temperature: -10˚C - 55˚C (14°F - 131°F)Storage Temperature: -10˚C - 55˚C (14°F - 131°F)
CERTIFICATESFCC, IC, DOT
WARRANTY2 years
Features:
Roll-off resistant shell design
Two-stage built-in drop-down sun shield
Ported flow through ventilation
Kinetic Polymer Alloy (KPA) shell uses nanotechnology to blend aramid fibers and high-end polymers to better manage energy
Meets or exceeds DOT FMVSS 218 certification
2 year warranty
COMFORT
Technologically advanced half shell with rolloff resistant design. The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool
VISOR
Builtin, two-stage drop-down sun shield is scratch and UV resistant. Removable peak
SECURITY
DOT-approved quick release chin strap for secure closure. State of the art multi-density EPS
VENTILATION
Fully adjustable, multiport, dynamic, flowthrough ventilation with ported EPS to keep you cool
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
SHELLMeets or exceeds DOT FMVSS 218. 948g,+/-50g. Sizes XS-2XL. Made from Kinetic Polymer Alloy (KPA). 2 Shells.
Intermediate Oval.
COMFORTTechnologically advanced half shell with roll-off resistant design. Highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool. VISORBuilt-in, two stage drop down sun shield is scratch and UV resistant. Removable peak.SECURITYDOT approved quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State-of-the-art multi-density EPS.VENTILATIONFully adjustable, multi-port, dynamic, flow-through ventilation with ported EPS to keep you cool.
HELMET SIZING CHART
SIZES
CENTIMETERS
INCHES
X-Small
53-54
20 7/8 - 21 1/4
Small
55-56
21 5/8 - 22
Medium
57 - 58
22 1/2 - 22 7/8
Large
59 - 60
23 1/4 - 23 5/8
X-Large
61-62
24 - 24 3/8
2X-Large
63 - 64
24 3/4 - 25 1/4
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The LS2 Advant X Carbon in matte woven carbon brings a lightweight carbon construction to a versatile touring helmet. Its chin bar rotates 180 degrees to the rear, while a separate internal sun visor and adjustable ventilation help you adapt to a changing day on the road.Matte Woven Carbon FinishThis version displays a regular woven carbon pattern beneath a low-gloss matte finish. The understated surface shows the carbon construction without a bright polished shine.Carbon Construction and SafetyThe shell and chin bar use carbon-fiber construction. Two shell sizes cover the range, with a multi-density EPS liner designed to manage impact energy. The Advant X Carbon meets DOT FMVSS 218 and ECE 22.06, with P/J approval for both open-face and full-face configurations.180-Degree Modular DesignThe chin bar rotates fully to the rear of the helmet, giving you an open-face configuration without leaving the bar above your forehead. A micrometric metal buckle secures the reinforced chin strap. Emergency-release cheek pads are designed to assist helmet removal when needed.Shield and Sun ProtectionThe quick-release outer shield is scratch-resistant and UV-resistant. A Pinlock MaxVision anti-fog insert is included, and the integrated drop-down sun visor helps manage glare as light conditions change. Retract the tinted sun visor for nighttime riding or poor visibility.Ventilation and ComfortAdjustable intake vents, rear exhaust ports and channels in the EPS liner move air through the helmet. The removable, washable comfort liner helps manage moisture, while laser-cut cheek-pad foam supports an even fit. Try the helmet on long enough to check crown contact and cheek pressure before choosing your size.Communication-System ReadinessBuilt-in speaker recesses accommodate a compatible communication system, sold separately. LS2 specifies adhesive mounting for its LS2 Intercom on the Advant X Carbon. Follow the system's installation instructions and confirm that the speakers and wiring do not alter the helmet's fit.Size Chart
Size
Head circumference (cm)
X-Small
53-54
Small
55-56
Medium
57-58
Large
59-60
X-Large
61-62
2X-Large
63-64
3X-Large
65-66
Measure around the widest part of your head above the eyebrows, keeping the tape level. Use the chart as a starting point and try the helmet on with the strap secured. The fit should be snug and even without painful pressure.Warranty SupportContact Eagle Leather for help with LS2 USA warranty coverage and claims. Keep your purchase receipt and the helmet's identifying labels; coverage is subject to the applicable manufacturer's terms.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently, even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets, often approaching 1,000 units, across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The EXO-T520 features a lightweight, low-profile that's perfect for both city commutes and long-distance touring. The aggressive, aerodynamic shape and unique AirFit inflation system combines to reduce drag and lift, while the EXO-T520’s dual homologated Advanced Polycarbonate shell and Multi-Density EPS provide the energy displacement and protection you need. The EXO-T520’s Anti-Fog coated Everclear outer face shield provides shatter and scratch resistance while, internally, the integrated SpeedView Sun Visor will help block the sun when you need it. 6 adjustable intake vents and integrated rear exhaust vents align perfectly with internal channels, keeping you cool when temperatures rise, and warm when temperatures drop. The EXO-T520 was also specifically designed to integrate with the new EXO-COM BlueTooth Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market.
Features:
Advanced Polycarbonate shell
Dual Density EPS
Aero-Tuned ventilation
Dual position mouth vent
Ellip-Tec II ratchet system
Everclear no-fog faceshield
Breath deflector
AirFit inflation system
Everclear SpeedView drop down sun-visor
KwikWick 'C' comfort liner
KwikFit cheek pads
EXO-COM ready
Communication system speaker pockets
Emergency release system
Aero skirt
DOT and ECE
Once again Scorpion EXO redefines value and versatility with the EXO-GT930 Transformer Modular helmet, by taking the traditional modular to the next level and offering you what no one else does. In seconds, and without tools, you can convert your full-face helmet to an open-face to meet changes in riding conditions, or your personal preference.Whether you choose to ride in full-face or open-face mode, both configurations also benefit from an integrated SpeedView® drop-down sun visor, which can be easily accessed by gloved hands. A detachable peak visor is also included for use in open-face mode, giving you an added layer of protection from the suns harmful rays, making it a true open-face helmet. Ventilation in full-face mode is provided by adjustable mouth and top intake vents and integrated rear exhaust vents that align perfectly with internal channels, keeping you cool when temperatures rise, and warm when temperatures drop.The dual homologated (DOT & ECE P/J) Advanced Polycarbonate shell and Multi-Density EPS provide the energy displacement and protection you need. And for those who need to stay connected, the EXO-GT930 was specifically designed to integrate with the new EXO-COM® BlueTooth® Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market.The EXO-GT930 modular helmet gives you the freedom to Transform your riding experience.
Shoei RF-1400 Solid Full-Face Motorcycle Helmet
The Shoei RF-1400 brings premium full-face protection, carefully developed aerodynamics and long-ride comfort to sport riding, commuting and touring. Its compact shape and adjustable ventilation make it a versatile choice for riders who want a refined road helmet with a clear, secure shield and a supportive, customizable interior.
Shell Construction and Protection
Shoei's AIM+ shell combines hand-laid fiberglass with organic and high-performance fibers. Inside, a dual-layer, multi-density EPS liner manages impact energy while incorporating channels for cooling airflow. Four shell sizes help keep the helmet proportionate across the size range. The U.S. RF-1400 is DOT compliant and Snell certified. E.Q.R.S. emergency cheek pad removal helps trained responders remove the helmet when necessary.
Research, Aerodynamics and Noise Control
Shoei developed the RF-1400 through extensive testing in its own wind tunnel. The sculpted shell and integrated spoiler help manage airflow and helmet stability at road speeds. Shield-mounted vortex generators, a close-fitting shield seal, substantial cheek padding and removable ear pads work together to reduce wind noise. Comfort still depends on fit, riding position, motorcycle windscreen and road conditions.
What Has Improved Over the RF-1200
More efficient aerodynamics: Shoei reports a 6% reduction in lift and a 4% reduction in drag in its testing compared with the RF-1200.
Revised ventilation: Repositioned forehead vents, an additional intake opening and a larger rear exhaust help move cooling air through the helmet.
Updated shield operation: The CWR-F2 shield uses a central locking mechanism and revised base plates for a secure seal and convenient opening.
Wider anti-fog coverage: The Pinlock EVO lens provides a 10% larger field of vision than the previous system.
Improved quietness: Updated window beading and fuller cheek pads help limit unwanted air and noise entering the helmet.
CWR-F2 Shield and Pinlock EVO
The clear CWR-F2 shield combines a two-dimensional outer surface with a three-dimensional inner profile for clear vision with minimal distortion, while filtering 99% of harmful UV rays. Its central lock and spring-loaded base plates pull the shield against the seal. A first-open position allows a small amount of extra airflow, and the quick-release system simplifies shield changes.
An included Pinlock EVO anti-fog insert helps maintain visibility in cool or damp conditions when correctly installed. Use RF-1400-compatible CWR-F2 replacement shields and the corresponding insert. Optional tinted or photochromic shields are sold separately.
Adjustable Ventilation
Six intake openings and four exhaust outlets move air through the EPS channels. The three-position chin vent lets you adjust lower-face airflow, while upper vents and the rear exhaust help release heat. Controls allow you to adapt the airflow as conditions change.
Comfort, Fit and Communication
The removable, washable and replaceable 3D Max-Dry System II interior wicks perspiration and dries quickly. Different cheek pad thicknesses allow fit refinement, and eyeglass channels help accommodate glasses. The liner and cheek pads should hold the helmet securely without painful pressure points.
The Sena SRL-EXT communication system is specifically designed for the RF-1400 and is sold separately. Follow the communication manufacturer's installation instructions when fitting speakers, microphone and mounting hardware.
Included Equipment
Clear CWR-F2 face shield
Pinlock EVO anti-fog insert
Breath guard
Chin curtain
Size Chart and Measurement
Measure around the widest part of your head, just above the eyebrows and ears, keeping the tape level. Use the chart as a starting point, then try the helmet on with the chin strap secured. It should feel snug all around and move your skin when gently rotated. Check for pressure points and excessive movement before riding.
Helmet Size
Head Circumference
X-Small
53-54 cm
Small
55-56 cm
Medium
57-58 cm
Large
59-60 cm
X-Large
61-62 cm
2X-Large
63-64 cm
3X-Large
65-66 cm
Size availability varies by finish. Matte Black and Matte Blue Metallic have a low-sheen appearance; Black, White, Brilliant Yellow and Basalt Grey have gloss finishes. Refer to the selected variant for current availability.
Warranty and Care
Shoei's limited warranty covers qualifying defects in materials and workmanship for five years from purchase or seven years from manufacture, whichever comes first, subject to its terms. Keep your purchase receipt. Follow the owner's manual for cleaning, shield adjustment and liner care; accident damage and normal wear are not manufacturing defects.
Equipped with many of SHOEI’s top features while keeping functionality efficient and to the point, the all-new RF-SR is anything but “entry level”. Boasting a compact, aerodynamic shell design along with sharp and aggressive styling, the RF-SR has a progressive look all of its own. Exceptional airflow, an advanced shield system, and a fully removable liner allow the RF-SR to excel whether short-distance street performance or long-distance touring comfort is your jam. The RF-SR–Streamlined functionality and affordability with premium SHOEI quality.
Advanced short-distance street performance and long-distance touring comfort
Compact, aerodynamic shell design with sharp and aggressive styling
Optimal shell aerodynamics and liner components reduce unwanted road noise
Matte black ventilation components enhance aggressive styling
Streamlined function and affordability
VENTILATION PERFORMANCE
Fine-tuned in SHOEI’s state-of-the-art wind tunnel to optimize the important balance between airflow and a quiet ride, the RF-SR is equipped with three (3) adjustable air intakes and two (2) exhaust outlets to help customize your ventilation in every condition.
Large lower vent shutter for ease of use with riding gloves
Two upper air vents for optimal air intake
Two uniquely-positioned upper exhaust vents for improved negative pressure suction
Wind-tunnel optimized to balance enhanced airflow and silence
SHIELD SYSTEM
The RF-SR’s shield system provides a vast field of vision that rivals helmetless peripheral, features innovative ribs to improve rigidity and eliminate bending, and facilitates quicker shield changes than ever before.
CWR-1 SHIELD
Protects from 99% of the sun’s damaging UV rays
3D injection-molding ensures distortion-free view throughout the entire field of vision
Innovative new ribs on top and bottom edge improve rigidity and eliminate bending
Improved shield locking mechanism
Comes equipped with Pinlock® EVO fog-resistant system
QR-E BASE PLATE SYSTEM
Facilitates quick and smooth shield changes
SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal
Strengthened springs for more precise functionality
Five-stage rotating dial for shield/base plate fine-tuning
SAFETY
Few characteristics of a motorcycle helmet are as critical as its first and second layers of defense, which is precisely why the RF-SR features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell and Dual-Layer, Multi-Density EPS liner.
MULTI-PLY MATRIX AIM+ SHELL
Proprietary technology integrates a six-ply matrix
Hand-laid interwoven layers of fiberglass with organic fibers and resin
SHOEI’s strongest, lightest, most elastic shell
DUAL-LAYER MULTI-DENSITY EPS LINER
Provides enhanced impact absorption by utilizing varying densities of foam
Allows cooling air to travel unrestricted through tunnels created in the EPS
Precise placement of multi-density EPS material yields a more compact, lightweight design
EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)
Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck
COMFORT
The RF-SR is equipped with a fully removable, washable, adjustable, and replaceable interior system that’s been enhanced for a comfortable fit and maximum helmet stabilization during high-speed riding.
Fully removable, washable, replaceable and adjustable
Three-dimensionally shaped to match the contours of a rider’s head
Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization
Cheek pad channel for eyeglasses
HELMET SIZE CHART
SIZE
HAT SIZE
CM
INCHES
X-Small
6 5/8 - 6 3/4
53-54
20 7/8 - 21 1/4
Small
6 7/8 - 7
55-56
21 5/8 - 22
Medium
7 1/8 - 7 1/4
57-58
22 1/2 - 22 7/8
Large
7 3/8 - 7 1/2
59-60
23 1/4 - 23 5/8
X-Large
7 5/8 - 7 3/4
61-62
24 - 24 3/8
2X-Large
7 7/8 - 8
63-64
24 3/4 - 25 1/8
3X-Large
8 1/8 - 8 1/4
65-66
25 5/8 - 26
HOW TO MEASURE YOUR HEAD SIZE
To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead).
Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets.
THE PERFECT FIT
No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.
Description
The LS2 Bagger Helmet starts with an ultra-lightweight fiberglass shell. LS2 adds a removable, washable comfort liner, so you can keep your lid as fresh as new. Also included is a zip-off neck skirt that will keep you warmer on cool days and can be removed when the sun is shining. The neck skirt has pockets for speakers from your MP3 player, and a hidden pocket around the neck to hide any wires. Rounding out the list is a shorter removable, 3-snap peak to shade your eyes.
Features:
HPFC (High Performance Fiberglass Composite) shell
2 shell sizes (XS-MD and LG-2XL)
Quick release strap
Shorter removable 3-snap peak
Zip-off neck skirt to keep you warm when the temps drop
DOT approved
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Description
The C91 helmet will offer riders some of the best features on the market at a budget friendly price. Starting with the Advance Polycarbonate Composite Shell. It provides a lightweight helmet with a superior fit and comfort using advanced CAD technology. The chin bar operates with an easy to use the single lever and is user friendly with gloves. It also includes an internal sun shield with a manual mechanism that moves forward and back with ease. The large top vent allows airflow ventilation throughout the deep EPS channels of the helmet, keeping you cool on rides. The Super Cool top liner and cheek pad interior gives additional cooling features with its moisture-wicking anti-bacterial fabric. The C91 is also Smart HJC ready to accept the 10B or 20B Bluetooth systems (*sold separately).
Features:
SHIELD & SUN VISOR OPTIONS
Hj-17 Anti Fog Shield
Hj-v5 Sun Visor
REPLACEMENT PARTS
Chin Bar
Sun Visor
Cheek Pads
Headliner
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
X-Small
53-54
6 5/8 – 6 3/4
20 7/8 – 21 1/4
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
X-Large
61-62
7 5/8 – 7 3/4
24 – 24 3/8
2X-Large
63-64
7 7/8 – 8
24 3/4 – 25 1/4
3X-Large
65-66
8 1/8 – 8 1/4
25 5/8 – 26
4X-Large
67-68
8 3/8 – 8 1/2
26 3/8 – 26 3/4
5X-Large
69-70
8 3/4 – 8 3/4
27 1/4 – 27 5/8
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The HJC i80 Solid is an adventure touring helmet for riders who want a removable peak and the convenience of a modular chin bar. Use the peak for an adventure setup or remove it for a cleaner road profile. Its adjustable internal sun visor, controllable ventilation and washable interior make it a practical choice for commuting and longer touring days.Shell and SafetyHJC's Advanced Polycarbonate Compound shell blends polycarbonate and ABS to balance impact resistance with manageable weight. Computer-aided development helps refine fit and shell shape. The US i80 meets DOT FMVSS 218 requirements.Adventure Configuration and AerodynamicsThe rotating chin bar opens for convenient access when stopped. A removable peak lets you adapt the helmet's configuration to your ride. HJC developed the peak using wind-tunnel testing and computational fluid dynamics to improve stability and reduce drag.Shield and Internal Sun Visor
The HJ-44 outer shield is Pinlock-ready, scratch-resistant and provides 99% UV protection.
An HJ-44-compatible Pinlock anti-fog insert is included.
The HJ-V12 dark-smoke internal sun visor reduces glare and offers an adjustable extension of up to 8 mm.
Retract the tinted sun visor in darkness or poor visibility. Follow HJC's instructions when removing the peak or changing the shield.Ventilation and Interior ComfortThe Advanced Channeling Ventilation System moves air from front to rear to carry heat and moisture out of the helmet. Top vents and adjustable lower vents let you regulate incoming airflow.Moisture-wicking fabric and contoured cheek pads support comfort. The crown and cheek pads can be removed for washing, and glasses grooves provide space for eyewear. A chin curtain is included.Communication CompatibilityThe i80 is Bluetooth-compatible. A communication system is sold separately; check mounting and speaker fit with your chosen system before installation.Color GuideMatte Black corresponds to HJC's Semi-Flat Black. Sand Beige has a semi-flat finish. The Metalic Blue option uses HJC's Semi-Flat Metallic Blue finish. Gloss Black, White and Nardo Gray offer the remaining solid finishes.Size Chart
Size
Head circumference (cm)
X-Small
53-54
Small
55-56
Medium
57-58
Large
59-60
X-Large
61-62
2X-Large
63-64
This is the HJC size chart linked to the US i80 by Helmet House. Measurements are a starting point; confirm the fit by trying the helmet on.WarrantyHJC covers manufacturing defects for up to three years from purchase or five years from manufacture, whichever comes first, subject to the manufacturer's warranty terms.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently, even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets, often approaching 1,000 units, across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The HJC i71 is a modern sport touring full face helmet built for riders who want everyday comfort, strong airflow, and convenient integrated features. Its streamlined shell, internal sun shield, and communication ready design make it a practical choice for commuting, touring, and daily street riding.
Features
Advanced Polycarbonate Composite shell balances impact resistance, strength, and manageable weight
Advanced Channeling Ventilation System moves air from the front of the helmet through rear exhaust ports
HJ 38 Pinlock prepared face shield provides 99 percent UV protection and a scratch resistant coating
Push and release shield locking system provides secure, simple operation
Three position HJ V12 internal sun shield allows the rider to fine tune coverage
Removable, washable, antibacterial interior helps manage moisture
Cheek pads include grooves for eyeglasses
Prepared for compatible Smart HJC Bluetooth communication systems
DOT approved
Included
Pinlock anti fog insert
Chin curtain
Breath deflector
Note: Smart HJC communication systems are sold separately.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
LS2 HH590 Rebellion Helmet
Like any worthy rebel, the LS2 Rebellion Helmet stands alone and charts its own course. With a stylish shell made of high performance, lightweight Kinetic Polymer Alloy (KPA), the Rebellion has just the right blend of retro-cool with a technical edge.
Imagine a half-shell motorcycle helmet that offers flow-through, ported ventilation to keep you cool on the hottest days. The short peak and Twin Shield System drop down sun shield will protect your eyes when the sun is in the horizon. The sun shield itself has unique, two-stage adjustability: lock it half way for just a little shade or full open for total sun protection.
The dual-density EPS meets / exceeds DOT standards for 50 state legal protection. The LS2 Rebellion Helmet is finished off with a micrometric, quick release chin-strap and set up for easy and seamless installation of the LS2 LinkIn Bluetooth communication system by Sena (sold separately). If you’re the type who sets your own course, the LS2 Rebellion Helmet was designed for you.
Features:
Kinetic Polymer Alloy (KPA) shell
2 shell sizes (XS-LG and XL-2XL)
Multi-density EPS
Adjustable Twin Shield System drop-down dark smoke sun shield
Sun shield is UV- and scratch-resistant
Micrometric quick release chin strap
Flow-through ventilation with channeled port and top vent
Technical fabric liner is hypoallergenic, moisture wicking, removable and washable
Laser-cut foam
LinkIn Ride Pal by Sena ready (sold separately)
DOT approved
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The C10 is an all-new competitively priced full-face helmet for riders of all ages who value quality and safety, offering a lightweight superior fit thanks in part to its Advanced Polycarbonate Composite shell that was designed using advanced CAD technology. Combined with a wide-view optically-superior face shield and its improved “ACS” Advanced Channeling Ventilation system that allows full front-to-back airflow to flush heat and humidity up and out, the C10 provides a safe and comfortable ride no matter the conditions. With sizes ranging from 3XS to 2XL, the C10 delivers the same great protection for both youth and adult riders alike.
*Smoke Shield is not included.POLYCARBONATE SHELLThe Advanced Polycarbonate Shell is designed to be lightweight with a superior fit and comfort, using CAD technology.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The EXO-AT960 Modular Helmet has evolved from one of the most popular Adventure Motorcycle helmets on the market; the EXO-AT950.
The EXO-AT960 can be used as a full face ADV helmet with external peak visor attached, or the peak visor can be removed for a more aerodynamic touring helmet. The oversized eye port is extremely wide for greater peripheral vision and downward visibility, and the modular chin bar can be conveniently flipped up.
The internal drop down Speedview® sun-visor allows you to adjust to changing lighting conditions throughout the day. Additionally, the no-fog Everclear® face shield can be removed and you can use the EXO-AT960 with goggles for off-road use. Three shell sizes made of Advanced LG® Polycarbonate and dual density EPS, result in a helmet that is light weight, strong, and protective. For those who need to stay connected, the EXO-AT960 was specifically designed to integrate with the new EXO-COM® BlueTooth® Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market.
Shell Construction
Advanced LG® Polycarbonate Shell developed and engineered, by Scorpion EXO to be lightweight, strong and maximize impact displacement
CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride
Advanced multi-layer EPS provides superior energy absorption
Strategically placed channels throughout the EPS foam provide increased airflow
Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification
Comfort
Aero-tuned ventilation system features one large intake vent on top, forcing cool air in while exhaust vents maximize movement of hot air out of the helmet
Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside)
Scorpion EXO’s face shield system pulls the shield securely against the eye port, ensuring a proper seal
KwikWick® C moisture wicking liner fabric keeps you cool and dry in warm weather, and warm in cool weather. Liner is easily removable and washable
KwikFit® 3D sculpted cheek pads accommodate most eyeglasses
Vision
EverClear® Faceshield offers state-of-the-art fog-free technology. Anti-Scratch hardened coating. 95% UV-A & UV-B protection. (Pinlock® face shields sold seperately)
Retractable interchangeable Speedview® drop down sun-visor. Choose the up or down position with an easy-sliding mechanism. Also features our exclusive EverClear® anti-fog coating on both surfaces
Wide eye port allows for greater peripheral vision and downward visibility. When the faceshield is removed the eye port accommodates most sizes and brands of goggles. (Eyeport is 11cm Tall)
Versatility
External peak visor can be easily removed to improve the aerodynamics for long distance touring
Seamlessly integrates with the EXO-COM® Communicator Kit or your favorite BlueTooth® system
Easy-use Flip-up Chin Bar features a single lever release which allows the chin bar to be raised or lowered with either hand
Block off plates included for use when visor is not on helmet
Included breath deflector and aero skirt (chin curtain) helps reduce wind noise
Additional Specs
Weight: ± 1858 grams / 4.09 lbs. (size medium)
Speaker pocket size: 50mm/5mm (round)
DOT FMVSS No. 218 Certified/ ECE 22.06 Certified
5-Year warranty
SIZE
INCHES
CM
HAT SIZE
X-Small
20 7/8 - 21 1/4
53 - 54
6 5/8 - 6 3/4
Small
21 5/8 - 22
55 - 56
6 7/8 - 7
Medium
22 7/16 - 22 3/4
57 - 58
7 1/8 - 7 1/4
Large
23 1/8 - 23 5/8
59 - 60
7 3/8 - 7 1/2
X-Large
24 - 24 3/8
61 - 62
7 5/8 - 7 3/4
2X-Large
24 3/4 - 25 3/16
63 - 64
7 7/8 - 8
3X-Large
25 9/16 - 26
65 - 66
8 1/8 - 8 1/4
HJC RPHA 91 Helmet
The RPHA 91 Helmet from HJC boasts beautiful, clean styling and features that make any ride more enjoyable. In an effort to make a modular helmet that is both extremely strong and exceptionally lightweight, HJC utilized the Advanced P.I.M. Evo shell technology with carbon fiber to enhance shock resistant performance.
Features:
D.O.T. Approved
Premium Integrated Matrix / P.I.M. EVO (Reinforcement materials including Carbon-Aramid Hybrid and Natural Fiber provide enhanced Shock-Resistant performance)
Aerodynamic design shell reduces air resistance and provides stability at high speed
Full front-to-back airflow, 5 intakes and 7 exhausts
Pinlock Ready HJ-37 Visor
Quick, Simple and Secure Visor Ratchet System
Adjustable 3-step sunshield (HJ-V12) for optimized position
Dark Smoke Sunshield Installed
Interior with advanced anti-bacterial fabric provides enhanced moisture wicking and quick dry function
Removable/washable crown and cheek pads
Ready for 21B & 50B Bluetooth (sold separately)
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The LS2 Stream II is a sport-styled urban-touring full-face helmet designed for commuting, touring and everyday road use. Its aerodynamic Kinetic Polymer Alloy shell balances durability with managed flexibility, while three shell sizes help keep the exterior profile more proportional across the size range.
Features and Rider Benefits
Kinetic Polymer Alloy shell provides a lightweight, durable structure with controlled flexibility
Three shell sizes and a multi-density EPS system support a more proportional, closely tuned fit
Pinlock 70 MaxVision-ready face shield helps riders add fog-management capability; insert sold separately unless otherwise stated
Scratch-resistant, UV-resistant shield with a quick-release mechanism simplifies cleaning and shield changes
Internal drop-down sun visor offers convenient glare reduction without changing the outer shield
Top and chin ventilation with rear exhaust ports and channeled EPS promote airflow through the helmet
Removable, washable, hypoallergenic liner with laser-cut foam supports comfort and easier care
Micrometric buckle provides quick, repeatable fastening
Ready for compatible LS2 intercom installation
Manufacturer-listed weight is approximately 1,550 g, plus or minus 50 g. Weight can vary by size and configuration.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Build a coordinated cruiser setup with the LS2 Rebellion Half Shell Bundle. This package pairs the LS2 Rebellion Half Helmet with one skull face covering in your selected color or design. Choose your preferred helmet finish, helmet size, and face covering style from the available options.
The Rebellion combines a classic half helmet profile with modern comfort and convenience. Its lightweight Kinetic Polymer Alloy shell uses a roll off resistant design and multi density EPS, while the integrated sunshield and adjustable ventilation make it practical for warm weather riding.
Bundle Includes
One LS2 Rebellion Half Helmet
One skull face covering in your selected color or design
Helmet Features
Meets DOT FMVSS 218
Lightweight Kinetic Polymer Alloy shell
Approximate weight of 948 grams, plus or minus 50 grams
Two shell sizes for a more proportionate fit
Multi density EPS impact liner
Roll off resistant half helmet design
Built in two stage drop down sunshield
Scratch resistant and UV resistant sunshield
Removable peak
Fully adjustable multi port ventilation
Removable and washable moisture wicking liner
DOT approved quick release chin strap
Face Covering
The included tube style face covering adds bold skull styling and flexible coverage around the lower face and neck. Select your preferred color or design when choosing your bundle.
The face covering is a comfort and style accessory. It is not protective equipment and does not replace certified eye, face, or respiratory protection.
Helmet Sizing
Measure around the widest part of the head, approximately one inch above the eyebrows.
X Small: 53 to 54 cm
Small: 55 to 56 cm
Medium: 57 to 58 cm
Large: 59 to 60 cm
X Large: 61 to 62 cm
2X Large: 63 to 64 cm
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The LS2 Copter is a lightweight open-face helmet intended for urban riding and commuting. Its Kinetic Polymer Alloy shell, broad outer shield and internal sun visor combine everyday visibility and convenience in a compact design.
Features and Rider Benefits
Kinetic Polymer Alloy shell balances light weight, durability and managed flexibility
Two shell sizes help maintain better proportions across the available size range
Wide, scratch-resistant and UV-resistant outer shield provides broad coverage and visibility
Internal drop-down sun visor offers convenient glare reduction
Quick-release shield mechanism simplifies cleaning and shield replacement
Twin top vents, rear exhaust vents and channeled EPS promote airflow
Removable, washable, breathable and hypoallergenic liner with laser-cut foam supports comfort and easier care
Micrometric buckle makes fastening and removal straightforward
Manufacturer-listed weight is approximately 1,250 g, plus or minus 50 g. Weight can vary by size and configuration.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Description
The helmet that redefined badass has evolved into the all-New Covert X. Same multi-configuration versatility featuring a refined 1/2 helmet profile, injection-molded LG polycarbonate mask, and lightweight Ultra-TCT composite shell construction resulting in a truly minimalist, no-nonsense package.
Features:
Multi-layered TCT-Ultra shell combines fiberglass, aramid and poly-resin fibers which minimize weight while maximizing strength and impact dispersal
Advanced multi-layer EPS provides superior energy absorption and channels for increased airflow
Unique multi-configuration design featuring removable front mask and rear comfort sleeve results in 3 distinct riding configurations: Full Mode, 3/4 Mode and 1/2 Mode
Subtly integrated forehead vent intakes
Dark smoke EverClear anti-fog sun shield installed
Anti-scratch coated and offers 95% UV-A & UV-B protection
FREE Clear EverClear anti-fog and anti-scratch coated face shield included
Removable/washable KwikWick III anti-microbial interior keeps you cool, dry and comfortable
Included cold weather ear covers with integrated speaker pockets to accommodate Bluetooth communication system speakers (when used in 1/2 helmet Mode)
Block-off plates included for use in 3/4 Mode
Optional Mask styles available (sold separately)
DOT FMVSS No. 218 Certified
5 Year Warranty Through Scorpion
HELMET SIZING CHART
SIZE
INCHES
CM
HAT SIZE
Small
21 5/8 - 22
55 - 56
6 7/8 - 7
Medium
22 7/16 - 22 3/4
57 - 58
7 1/8 - 7 1/4
Large
23 1/8 - 23 5/8
59 - 60
7 3/8 - 7 1/2
X-Large
24 - 24 3/8
61 - 62
7 5/8 - 7 3/4
2X-Large
24 3/4 - 25 3/16
63 - 64
7 7/8 - 8
The HJC i31 is a modern open-face helmet designed for commuting, cruising and everyday street riding. Its aerodynamic polycarbonate-composite shell, broad shield and adjustable internal sun visor provide useful coverage and convenience while preserving the open feel many riders prefer.
Features and Rider Benefits
Advanced Polycarbonate Composite shell is CAD-developed for manageable weight, comfort and fit
ACS Advanced Channeling Ventilation System moves air from the front of the helmet toward the rear to help release heat and humidity
Pinlock-ready HJ-43 shield provides 99% UV protection and supports an optional anti-fog insert
Improved shield-locking system helps create a more stable, refined seal
Adjustable HJ-V12 internal sun shield extends for added coverage and helps reduce glare
Extended cheek area is designed to improve stability, comfort and noise management
Moisture-wicking, quick-drying crown and cheek pads are removable and washable
Interchangeable cheek pads and integrated glasses grooves help fine-tune comfort
Micrometric retention buckle provides quick, repeatable fastening
Meets DOT FMVSS 218 requirements
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The .38 helmet from Highway 21 is the perfect no nonsense, three quarter helmet for your ride. DOT approved and crafted from lightweight fiberglass, the .38 features a removable quilted comfort liner, a 3 snap configuration for visor or shields, and a padded strap and D ring chin attachment. Classic style and good looks are the hallmark of the .38 helmet from Highway 21.
Features:
D.O.T. approved
Durable lightweight fiberglass shell
Dual Density EPS (expanded polystyrene) Interior
Coolmax® comfort liner & cheek pads
Washable and replaceable interior
Dual D-rings secure the chinstrap
3 snap visor/shield system
Protective helmet bag
HELMET SIZING CHART
SIZE
US HAT SIZE
INCHES
CM
X-Small
6 5/8-6 3/4
20.50-21.25
53-54
Small
6 7/8-7
21.25-22.00
55-56
Medium
7 1/8-7 1/4
22.00-23.00
57-58
Large
7 3/8-7 1/2
23.00-23.75
59-60
X-Large
7 5/8-7 3/4
24.00-24.50
61-62
2X-Large
7 7/8-8
24.50-25.25
63-64
i90 Modular Helmet Solid Color Gloss Black,Matte Black,Wine,White
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZW
INCHES
2X-Small
51-52
6 3/8 – 6 1/2
20 – 20 1/2
X-Small
53-54
6 5/8 – 6 3/4
20 7/8 – 21 1/4
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
X-Large
61-62
7 5/8 – 7 3/4
24 – 24 3/8
2X-Large
63-64
7 7/8 – 8
24 3/4 – 25 1/4
3X-Large
65-66
8 1/8 – 8 1/4
25 5/8 – 26
4X-Large
67-68
8 3/8 – 8 1/2
26 3/8 – 26 3/4
5X-Large
69-70
8 3/4 – 8 3/4
27 1/4 – 27 5/8
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The right motorcycle helmet starts with proper fit—not simply the size printed on the label. Head shape, even pressure around the crown, cheek-pad contact, and the retention system all affect how securely and comfortably a helmet fits.
Eagle Leather stocks full-face, modular, open-face, and half helmets for different riding styles, comfort preferences, and levels of coverage. Compare the certification, weight, ventilation, shield system, eyeglass compatibility, and communication-system accommodations listed for each model.
Choose the Right Helmet Style
Full-face helmets provide coverage around the entire head and include a fixed chin bar. They are popular for highway riding, commuting, sport riding, and changing weather conditions.
Modular helmets include a chin bar that lifts for added convenience during stops. Because weight, locking mechanisms, and permitted riding positions vary, compare the specifications of each model.
Open-face helmets cover the top, back, and sides of the head while leaving the face open. Many riders choose them for increased airflow and visibility.
Half helmets provide the least coverage and the most open riding experience, making them particularly popular with cruiser riders.
Proper Fit Matters
Use the manufacturer’s size chart as a starting point, but remember that two helmets marked the same size may fit differently. A new helmet should feel evenly snug without painful pressure points and should not rotate independently when you move it.
If possible, wear the helmet for several minutes before deciding. Comfort padding may settle somewhat with use, but a painful pressure point or incompatible internal shape is unlikely to correct itself.
Get Fitted at Eagle Leather
Eagle Leather is a real brick-and-mortar motorcycle gear store in Lakewood, Washington. We stock the helmets we sell, and our team can help you compare brands, sizes, internal shapes, and features in person. Trying several helmets side by side can make the difference between simply buying your size and finding a helmet that actually fits you properly.
Explore expert articles and buying guides on motorcycle helmets—covering safety standards, sizing tips, and the latest styles—to help you ride with confidence.
Frequently Asked Questions About Motorcycle Helmets
Which motorcycle helmet style is right for me?
The right helmet style depends on your coverage and convenience preferences, along with proper fit. Full-face helmets provide enclosed head, face and chin coverage with a fixed chin bar. Modular helmets can cover those same areas when fully closed, with a chin bar that opens for convenience at stops. Open-face helmets cover the top, back and sides of the head without a chin bar. Half helmets cover the upper portion of the head with less side and rear coverage. Shield and eye-protection options vary by model. Compare each helmet’s fit, certification and features before choosing.
Is a modular helmet as safe as a full-face helmet?
Both modular and full-face helmets can meet recognized safety standards, but certification does not mean that every helmet provides identical protection. A full-face helmet has a fixed chin bar, while a modular helmet uses a hinged chin bar that opens for convenience when stopped. Construction, certification, fit, and features vary by model, so compare the specifications of each helmet rather than judging by helmet style alone.
Unless the helmet’s manufacturer specifically approves riding with the chin bar open, keep it fully closed and securely latched while riding. The right choice depends on your preferred balance of coverage, convenience, fit, weight, and features.
How do I choose the right motorcycle helmet size for my child?
Choose a youth helmet according to the child’s current head measurement and shape—not age or anticipated growth. Measure around the widest part of the head, approximately one inch above the eyebrows, and compare the measurement with the sizing chart for the specific helmet.
The helmet should feel evenly snug without painful pressure points. When you gently move it from side to side, the child’s skin should move with the liner instead of the helmet rotating independently. Fasten the chin strap and follow the manufacturer’s fit and retention checks to confirm that the helmet stays securely in place and cannot be rolled off the child’s head.
Do not purchase an oversized helmet to leave room for growth. A loose helmet can move out of position and may not provide its intended protection. Because fit varies between brands and models, we recommend bringing your child to Eagle Leather’s Lakewood store for an in-person fitting.
Can I replace the face shield on my helmet?
Many motorcycle helmets have replaceable face shields, but shields are not universally interchangeable, even within the same brand. Check the manufacturer’s compatibility information for your helmet’s exact model, generation and size, where applicable.
Replace a shield that is cracked, scratched or otherwise damaged, or has cloudiness or distortion that affects clear vision. If the shield or its mounting system does not attach and operate securely, stop using it until the problem has been corrected according to the manufacturer’s instructions.
Clear, tinted, mirrored and Pinlock-compatible options vary by helmet. Follow the manufacturer’s restrictions for the specific shield. Use clear eye protection at night or in poor visibility. Washington’s eye-protection rules prohibit tinted devices during the nighttime and low-visibility conditions specified in WAC 204-10-026(11).
If you are unsure which shield fits, bring your helmet to Eagle Leather’s Lakewood store. We can help check compatibility and explain the manufacturer’s removal and installation instructions.
What does DOT certification on a motorcycle helmet mean?
A DOT label means the helmet’s manufacturer certifies that the helmet complies with Federal Motor Vehicle Safety Standard No. 218, the U.S. standard covering requirements such as impact attenuation, penetration resistance, retention-system performance and labeling.
NHTSA does not test and approve each helmet before it is sold. Manufacturers certify their own helmets, while NHTSA tests selected helmets for compliance and can require corrective action or a recall when a helmet fails.
Some helmets also carry ECE or Snell certification. These standards use different testing and certification programs and can provide additional information when comparing helmets, but they do not replace the DOT certification required for motorcycle helmets sold for on-road use in the United States. Always check the certifications listed for the specific helmet, and remember that certification does not replace proper fit.
Is a motorcycle helmet required by law in Washington?
Yes. Washington generally requires motorcycle, motor-driven-cycle and moped operators and passengers to wear a motorcycle helmet on public roads. The helmet must carry the manufacturer’s certification that it complies with U.S. Department of Transportation requirements, and its neck or chin strap must be securely fastened while the vehicle is moving.
When operating one of these vehicles without a windshield, the operator must also wear qualifying glasses, goggles or a face shield. Washington law also prohibits transporting a child under five years old on a motorcycle or motor-driven cycle.
The helmet-use requirement has limited exceptions for certain enclosed vehicles and antique motor-driven cycles, as specified in the statute. Requirements can change, so consult RCW 46.37.530 for the current law. Helmet and eye-protection laws may differ when riding outside Washington.
Motorcycle Helmet Articles & Buying Guides
,
by Eagle Leather Team
Cardo BEYOND GTS Buyer’s Guide: Features, Fit, Communication and Preorder Information
