RAM Tough-Claw™ Mount with Universal X-Grip® Phone CradleThe RAM-HOL-UN7-400U consists of the small Tough-Claw™ base and universal X-Grip® cradle. The X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip® cradle expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Clamping Range (Rail/Tube Surfaces):0.625" to 1.5" Clamping Range (Flat Surfaces):0" to 1.14"X-Grip® Cradle Dimensions Minimum Width = 1.875" (Minimum Height = 4.25")Maximum Width = 3.25" (Minimum Height = 2.25")Depth = 0.875"un7 aniamation
FEATURES
Spring-loaded holder features adjustable side supports that provide a secure fit for a variety of large phones and other devices; easily insert and remove your phone with one hand
Includes U-bolt base that accommodates rails from .5" to 1.25" in diameter and a short length, B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
OVERVIEWThis version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of large phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dimensions will also fit in the holder. Included is a short RAM® double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5” to 1.25” in diameter.HARDWARE INCLUDEDAssembly Hardware(1) 1/4"-20 U-Bolt for .5" - 1" Rails(1) 1/4"-20 U-Bolt for 1" - 1.25" Rails(2) 1/4"-20 Nylock Nuts(2) Rubber Caps(1) U-Bolt SpacerHOLDER DIMENSIONSHeight Range: 5.75" - 7.25"Width Range: 2.625" - 3.625"Max Depth: .72"CLAMP RANGE.5" - 1.25" diameterSOCKET TO SOCKET LENGTH1.75"BALL SIZEB Size (1")WEIGHT CAPACITYStandard Use: 2 lbsHeavy-Duty Use: 1 lbMATERIALSMarine-grade aluminumHigh strength compositePACKAGING TYPEPoly BagWEIGHT0.8 lb
RustproofHigh strength composite and stainless steel constructionSpring loaded cradle expands and contracts for perfect fit of your deviceRubber coated tips will hold device firm and stableSocket technology allows for multiple adjustment angles and articulation of deviceIncludes Tether for open cockpit and extreme environmentsLifetime warrantyMade in U.S.A.Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite 1" Rubber Ball "B" SizeWeight 1.1 lbs.
FEATURES
Spring-loaded holder features adjustable side supports that provide a secure fit for a variety of large phones and other devices; easily insert and remove your phone with one hand
Included B size 1" RAM® rubber balls allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
XL Mount for larger phones
Features:
Standard length double socket arm
A socket at both ends that accommodates 1" ball bases
A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection
This socket technology allows for almost infinite adjustment and perfect viewing angles
Specifications:
Overall Length: 3.69"
Socket-To-Socket Length: 3"
High strength glass filled nylon construction with corrosion resistant stainless steel hardwareRubber pads provide stable, even gripping and protection of mounting surfaceClamp jaw is configured for round, flat and odd shapesQuick installation and removal of Tough-Claw™Lifetime Warranty!Made in U.S.A.Material:High Strength Composite and Stainless Steel HardwareBall Size:1" Rubber Ball "B" SizeNote:The "U" in the part number reflects product packaged in poly bag.Weight:0.35 lbs.
Provides an extended reach with an overall length of 6" and a socket-to-socket length of 5.31"
Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5"--- 1.10" at the following intervals:Metric12mm14mm16mm18mm20mm28mmStandard.5".55".63".71".79"1.10Material:Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength CompositeBall Size:1" Rubber Ball "B" SizeNote:Certain motorcycles require adding electrical tape to the area of the plug that is the largest diameter until it fits snugly in the stem. RAM recommends that you review the installation instructions for this part prior to ordering. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.Weight:0.6 lbs.
Consists of a 3.3in. twist lock suction cup base that is connected to the RAM-B-238U diamond base with 1in. rubber ball. The suction cup is designed to have an extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.
Features
RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces
Includes diamond ball base compatible with any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of high-strength composite and powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty*
Includes four black rubber post caps to keep your device secure when mounted in the RAM® X-Grip® phone or tablet holderCompatible with all versions of the RAM® X-Grip®Made of rubber; super glue includedBacked by a lifetime warranty
FEATURES
Spring-loaded holder features adjustable side supports that provide a secure fit for a variety of large phones and other devices; easily insert and remove your phone with one hand
Included B size 1" RAM® rubber balls allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
