Shoei X-15 Helmet
Shoei pushes the boundaries of innovation with disruptive technology to bring you the X-15 helmet, for when the milliseconds count! Utilizing their state-of-the-art wind tunnel facility, Shoei designed the X-15 with 6.1% drag reduction and 1.6% lift reduction compared to its predecessor, the X-14. Inside its Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, the X15 is jam-packed with a whole host of features that provide peak performance, comfort and safety. The search for peak performance need go no further than the X-15 from Shoei.
Aerodynamic Shell Design
Designed and refined in Shoei’s state-of-the-art wind tunnel facility
6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14
Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces
Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance
Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell
Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity
Four shell sizes
Multi-Piece Multi-Density EPS Liner
Optimized impact absorption thanks to varying densities of foam in key areas
Precise placement of multi-density EPS liner material yields a more compact, lightweight design
Strategically-located tunnels allow cooling air to travel unrestricted through the helmet
Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)
Ventilation System
Seven (7) closable air intakes and six (6) exhaust outlets
Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet
Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation
Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area
Field of Vision
Revised eyeport trajectory from previous model increases the upper field of view by 5mm
DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport
CWR-F2R Shield & Base Plate System
Distortion-free face shield thanks to Shoei’s innovative 3D injection-molding process
Protects against 99% of the sun’s damaging UV rays
CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility
Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise
Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates
Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock
Trigger lock mechanism prevents the shield from detaching during an impact or crash
3D Max-Dry Custom Interior System II
3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable
Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors
Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit
Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit
Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions
Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit
Emergency Quick Release System (E.Q.R.S.)
Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet
Safety Certifications
Snell M2020R certified
ECE-22.06 certified
DOT certified
The SHOEI GT-Air 3 combines modern design, advanced protection, and all-day comfort for touring riders. With its integrated sun visor, quiet aerodynamic shape, and seamless Shoei Comlink system, this helmet is built for the ultimate ride.
SPECS
- Optimized Aerodynamic Performance - Wind Tunnel Tested for Maximum Noise Reduction - CNS-1C Pinlock® Shield System – Includes Pinlock® Lens - Enlarged QSV-2 Sun Shield System - Enhanced Air Circulation Through Multiple Venting and Extraction - AIM Shock-Absorbent Shell and EPS Liner for Improved Impact Protection - Emergency Quick-Release System (E.Q.R.S.) - Micro Ratchet Chin Strap - SHOEI Comlink System Integrates With Optional SENA SRL 3 for Simplified Installation - Breath Guard and Chin Curtain Included - Standards: DOT - Construction: AIM (Advanced Integrated Matrix) Shell - Weight: 3.91 lbs / 1,774.75 g (approx. based on size medium solid color)*The weight listed is for the helmet alone and does not include the chin curtain, breath guard, or intercom
DESCRIPTION
Step into the future of touring with the SHOEI GT-Air 3, a helmet that combines cutting-edge safety, comfort, and aerodynamics for the modern rider. Designed with a sleek, aerodynamic silhouette, it reduces noise while delivering exceptional performance on the open road. Safety comes first with its shock-absorbent AIM shell, multi-density EPS liner, and the Emergency Quick Release System (E.Q.R.S.), ensuring you're protected in any situation. The mist-retardant CNS-1C Pinlock® visor and stainless-steel Micro Ratchet System provide clear vision and security.
Comfort is paramount, featuring a QSV-2 sun visor and 3D center pad, with cheek pads in various thicknesses for a personalized fit. The detachable, washable pads keep you fresh on long rides, while the integrated Shoei Comlink system keeps you connected. Ventilation is engineered to perfection, with multiple inlets and outlets, an insect filter, and adjustable vents for ultimate airflow. Aerodynamically enhanced with an integrated spoiler and wind tunnel testing, the GT-Air 3 delivers a smooth, quiet ride, making it the go-to helmet for touring enthusiasts seeking both style and substance.
The all-new Arai Regent-X is designed to isolate you from distractions with the kind of comfort only Arai can deliver. Built with the same protection as our flagship Corsair-X model, the Regent-X features a new interior for both comfort and ease of taking it on and off.
The Vendetta Jacket was created for your next adventure, on or off the bike. A removable hood makes this jacket effortlessly cool, while the armor pockets and gun pockets mean you can be ready for anything.
Stop sacrificing fashion for safety! Ride safe and look absolutely amazing doing it, with our newest Eagle Leather exclusive.
Bundle includes one men's Vendetta Jacket and one Women's Vendetta Jacket
Men's Vendetta Features:
Lightweight distressed sheepskin
Mandarin collar
Removable zip-out hoodie
Chest pockets
Two chest vents
Fully vented
Two snap slash pockets
Zipper on each sleeve
Permanent mesh liner
Action back
Full sleeve, zip-out, insulated thermal liner
Concealed carry pockets with tapered holster for a more stable fit
Armor pockets for CE1 rated inserts
Women's Vendetta Features:
Slim fit, size up for layering
0.8-0.9mm Sheep Dutch
Center zip style with banded collar, and cropped center zipper
Two vented zippered chest pockets
Two zippered buttoned chest pockets
Side relief zippers
Two buttoned slash pockets
Two conceal carry pockets with bullet snaps and tapered holsters
Zippered sleeves with gussets and buttoned snaps
Action back
Upper back vent
Removable zip-out hood
Insulated zip-out thermal liner
YKK zippers
Armor pockets for CE1 rated armor
SHELL Meets or exceeds DOT FMVSS 218 and ECE 22.06.1300 g +/- 50g.Sizes XS-3XL.Made from 6K carbon fiber. 6 shells.Intermediate Oval.COMFORT
Removable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR
“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.
SECURITY
DOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATION
Fully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
The Creators of the original bad-ass Covert Motorcycle Helmet has now developed a full-face version, the Covert FX Carbon!The Covert FX displays the same edgy style and function that is expected from the ScorpionEXO Covert Series. However stylish the details may be, they have important function. Each helmet is carefully hand crafted using the latest 3K Carbon Fiber which provide superior strength and extreme light weight. The low-profile shell has been aerodynamically tuned for motorcycle riding, minimizing both lift and turbulence for a smoother, quieter, and more stable ride.
SHELL:
SHELL
Extremely lightweight TCT-U™ 3K Carbon Fiber shell provides superior strength and impact dispersal properties
CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride
Advanced multi-layer EPS provides superior energy absorption
Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification
COMFORT:
Aero-tuned ventilation system features closeable intake vents on top help force cool air in, while exhaust vents maximize movement of hot air out of the helmet
Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside)
Strategically placed channels throughout the EPS foam provide increased airflow
KwikWick® III Comfort Liner features a moisture wicking fabric that keeps you cool and dry in warm weather, and warm in cool weather. Liner Kit is easily removable and washable. Optional Cheek Pads sold separately
KwikFit® 3D sculpted cheek pads accommodate most eyeglasses
VISION:
ScorpionEXO’s face shield ratchet system pulls the shield securely against the eye port, ensuring a proper seal
EverClear® face shield offers state-of-the-art fog-free technology and 95% UV-A and UV-B protection
Optically superior face shield features a shatter resistant, Anti-Scratch hardened coating
FREE Additional Dark Smoke Everclear® fog-free face shield included. (Pinlock® face shields sold separately)
Tool-less face shield removal system
Comm-Ready speaker pockets allow for easily installation of your favorite Bluetooth® communication system speakers
Optional Thinner and Thicker cheek pads available to help optimize fit (sold separately)
Reflective material incorporated into the cheek pads for increased night time visibility
Included solid neoprene aero skirt (chin curtain) helps reduce wind noise
ADDITIONAL SPECIFICATIONSWeight: ± 1,348 grams / 2.9 lbs. (size medium)
Speaker pocket size: Height 50mm x Width 50mm x Depth 7.5mm
2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam
DOT FMVSS No. 218 Certified/ ECE 22.06 Certified
5 Year Warranty
PRE-ORDER AVAILABLE - ETA EARLY DECEMBER
Sena 60S HD Bluetooth Headset - Single Pack
The Sena 60S is a cutting-edge motorcycle helmet communication system designed for riders who crave seamless connectivity and high-performance features. Equipped with Mesh 3.0 Intercom technology, the 60S allows users to effortlessly connect with a virtually unlimited number of riders, providing a clear and stable communication experience even in large groups. With its 2nd generation of Harman Kardon speakers, the 60S ensures crisp audio quality for music, GPS navigation, and phone calls. Whether you're exploring the open road solo or riding with friends, the Sena 60S elevates your journey with unparalleled connectivity and convenience.
Features:
Geo-Based Group Intercom - Connect with all Wave users in a 1 mile radius
Rider-Based Group Intercom - Establish Group Intercom with selected Wave participants
Real-Time Location Display- See location of participants on the Wave App
Intelligent Intercom - Automatically switch from Wave Intercom to Mesh IntercomTM when cellular service is unavailable
Cross Brand Compatible- Any Bluetooth headset (even non-motorcycle specific) can use Wave, with limited functionality
Communication:
Wave Intercom
Mesh 3.0
Bluetooth intercom IPX7 waterproof rated
Integrated flashlight
Modular faceplate and jog dial with multiple cover options included
2 magnetic mounting clamps
Sound by Harman Kardon:
2nd Generation Harman Kardon 40mm Speakers
Higher sound output
Increased audio resolution
Wider dynamic range
Wave Intercom:
Based on VoIP service
Virtually unlimited intercom distance
Simple intercom group creation
Real-time location sharing
Cross-brand compatibility
Bluetooth Intercom:
Four-way intercom
HD two-way intercom
Working distance 2.0 km (1.2 mi)
Talk time: 22 hours (with the dynamic motion LED off)
Mesh 3.0:
New Mesh algorithm for improved intercom quality and strength
Improved noise cancellation for clearer communication
Working distance 2.0 km (1.2 mi) in open terrain - up to 8.0 km (5.0 mi) with 6 participants
Intercom Mode - Open mesh with 9 channels, group mesh
Talk time: 16 hours (with the dynamic motion LED off)
CLASSIC DESIGN MEETS MODERN TECHNOLOGYThe Cavalry 2 is a cutting edge smart helmet that blends classic half helmet styling with modern communication technology. The composite fiberglass shell and EPS lining provide protection and comfort, while the integrated communication system, speakers, and microphone keep the rider connected when they're on two wheels. The Cavalry 2 is the pinnacle of DOT certified half helmet protection, that is integrated with the latest innovations in communication technology.
KEY FEATURES
Mesh 2.0 Intercom™Robust & reliable communication network.
Intercom Range up to 0.8 milesMaximum distance operating within optimal conditions.
Built-In Speakers & MicIntegrated 40mm premium speakers and a microphone
Multi-Channel CommunicationCommunicate with different groups across 9 channels.
Multi-Language Voice PromptsSpoken audio cues from the headset across 3 languages: English, Spanish, and French.
Quick ChargingSignificant reduction in battery charge time.
Over The Air Firmware UpdatesKeep devices updated through the Sena Motorcycles App.
Sena Smartphone AppsAllow you to configure device settings, access the User's Guide, and more.
COMFORT AND SAFETY FOR THE LONG ROUTE
The Cavalry 2 feels like an extension of the body, providing all-day comfort and protection. The shell is constructed from a durable and lightweight composite fiberglass and lined with a high-quality EPS foam for robust protection and comfort. The tried and true double D-ring chin strap is padded for a comfortable and secure fit. With its premium materials, fit, and finish the Cavalry 2 ensures long-lasting comfort and safety.
MESH INTERCOM CONNECTIVITY
The Cavalry 2 features Mesh Intercom for rider-to-rider communication. Mesh Intercom brings robust, reliable connections and flexible intercom message routing with significant enhancements to Sena’s Mesh algorithm. Mesh offers an unprecedented level of intercom audio quality with two Mesh settings, Multi-Channel Open Mesh Intercom™ and Group Mesh Intercom™.Open Mesh offers a simple, single push of a button to click-to-connect to the Mesh intercom network. With a simple push of the Mesh Intercom Button, the Cavalry 2 will connect to any other Sena Mesh headset, allowing to talk to another rider up to 0.8 miles apart. The Open Mesh Intercom features the industry’s first Mesh Intercom™ Channel System which allows users to switch between nine channels when operating in Open Mesh mode.For a private group conversation, Cavalry 2 also offers Group Mesh Intercom mode. Group Mesh supports a single, private group for up to 24 participants and the same range as Open Mesh. To ensure privacy, only invited users can join the Group Mesh chat.
AN UNPARALLELED AUDIO EXPERIENCE WHILE RIDING
The Cavalry 2 features Sena's Advanced Noise Control™, which reduces wind and road noise when talking through Mesh Intercom to other riders. With the microphone hidden away in the helmet, riders can talk while riding with a clear view of the road.
SPECIFICATIONSWEIGHT950±30 g (M size)
HELMETSize: S / M / L / XL / XXLColor: Matte BlackComposite fiberglass shellDouble D-Ring Chinstrap
MESH NETWORKMesh 2.0 Intercom™ Technology
BLUETOOTHBluetooth 5.2Headset Profile (HSP)Hands-Free Profile (HFP)Advanced Audio Distribution Profile (A2DP)Audio Video Remote Control Profile (AVRCP)
INTERCOMWorking Distance:- Mesh Intercom™: up to 0.8 miles in open terrain
Supports up to:- Open Mesh Intercom: virtually limitless- Group Mesh Intercom: 24 riders
Supports Channels:- Open Mesh Intercom: 9 channels
AUDIONoise Cancellation: Advanced Noise Control™Codec: Built-in SBC Codec
BATTERYTalk Time: 18 hoursCharging Time: 2.5 hoursType: Lithium Polymer Battery
TEMPERATUREOperating Temperature: -10˚C - 55˚C (14°F - 131°F)Storage Temperature: -10˚C - 55˚C (14°F - 131°F)
CERTIFICATESFCC, IC, DOT
WARRANTY2 years
Your Ultimate Track Companion! Crafted from premium cowhide, CE-certified for top-notch protection, and designed for airbag compatibility, this race-fit suit combines safety and performance seamlessly. Stay cool with perforated leather and enjoy flexibility with accordion stretch panels. Featuring Armanox brand armor, replaceable knee sliders, and a 2-year warranty, it's your ticket to dominating the track in style. Unleash your inner track beast.
SPECS
1.1 to 1.2mm (about 0.05 in) genuine drum-dyed premium cowhide main chassis
Abrasion, impact, and tear resistance tested, CE certified as AAA EN 17092-2
Designed and engineered for airbag compatibility
Race-fit with rotated sleeves and pre-curved arms and legs for performance
Perforated leather at chest, back, and top of legs for high-level ventilation
Abrasion-resistant heavy-duty 4-way stretch material at key areas
High-impact performance ergonomic speed hump
Armanox brand shoulder armor is impact tested and CE certified to EN 1621-1 Level 2
Armanox brand elbow armor is impact tested and CE certified to EN 1621-1 Level 2
Armanox brand knee armor is impact tested and CE certified to EN 1621-1 Level 2
Armanox brand hip armor is impact tested and CE certified to EN 1621-1 Level 2
Armanox brand back armor is impact tested and CE certified to EN 1621-2 Level 2
Accordion stretch panels along side of back, lower back, bicep, elbow, and knee
External shoulder armor helps deflect impacts
External elbow sliders that you’ll probably never use but they look cool
Includes replaceable knee sliders with extra-large Velcro loop panel area
Auto-locking zippered sleeve cuffs and zippered leg openings add security
NORU recommends using Molecule apparel care products to keep your suit at its best
2-year workmanship and materials warranty
Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.
TECH SPECs
Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified
⚠️ WARNING: This product can expose you to chemicals including Phthalates, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
⚠️ WARNING: This product can expose you to chemicals including Lead and Cadmium, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
FITMENT
Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.
SHELL
Meets or exceeds DOT FMVSS218 and ECE22.06.1390 g +/- 50gSizes XS-3XL.Made from High PerformanceFiberglass Composite (HPFC) 6 shells.
COMFORT
Removable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR
“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.
SECURITY
DOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATION
Fully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
New Zealand Lambskin.
Sleek leather Shirt jacket designed with a self-tie belt to define waistline.
One chest pocket.
Two hand pockets.
Satin liner with two inside pockets.
Button up closure.
Clean by Leather Specialist.
Love a tough looking jacket with a little flair? This soft sheepskin jacket is tough enough for a motorcycle ride, but embroidered rose details soften the look to be sweet enough to wear on or off the bike. And it comes with all your favorite First MFG features like pockets, armor pockets, and more!
Features:
True to size
Sheepskin Leather
Motorcycle style with snap down lapel, collar, epaulets and asymmetrical zipper
Two zippered chest pockets
Two zippered slash pockets
Pink Rose embroidery detail on both sleeves and torso
Zippered sleeves
Two zippered back vents
Two rear zipper reliefs
Mesh lining
Two conceal carry pockets with tapered holsters
One cellphone pocket
Armor pockets in shoulders, elbows and back for CE rated armor
The Jewel is both simplistic and has great details at the same time. This jacket will be right at home on any motorcycle! With a full-length center zipper, and snap collar, plus two angled pockets up front, plus two zippered pockets, you'll have plenty of storage! Out back, this jacket has an action back with zippered vents, and two side belts with buckles. The insulated liner is fully removable, so you can adjust depending on the temperature.
FEATURES
.8mm - .9mm Diamond Cowhide Leather
Full length center zipper
Snap collar
Two snap pockets
Two zippered pockets
Action Back with zippered vents
Shouder details
Side belts with buckles
Removable insulated liner
The HJC V10 Helmet is a perfect fusion of timeless appeal and contemporary innovation. This exceptional helmet pays homage to the past while seamlessly integrating cutting-edge elements. Experience the best of both worlds with its vintage charm, complemented by state-of-the-art features such as the advanced channeling ventilation system and a remarkably lightweight fiberglass composite shell. Embrace the thrill of the ride with a helmet that embodies the essence of simplicity and sophistication, without compromising on modern-day necessities. The HJC V10 Helmet promises a ride like no other, where classic meets innovation for an unparalleled journey.
Features:
Advanced Fiberglass Composite Shell for light weight, superior fit and comfort
Three shell sizes
CAD shaped shell design for improved aerodynamics
"ACS" Advanced Channeling Ventilation System
Pinlock Ready HJ-41 face shield
Attachment System allows simple and secure tool-less shield replacement
Interior provides moisture wicking and quick drying function
Removable/washable crown and cheek pads
Emergency Kit (Cheek Pads) for safe and quick rescue in emergency situations
Ready for HJC Smart 10B & 20B Bluetooth Headsets (sold separately)
DOT approved
Note: Helmet ships with clear face shield.
This jacket seamlessly marries timeless design with Armor pockets to provide the rider unparalleled safety and style on the road. Constructed with our all New Malibu Cowhide, this jacket has a rugged and refined aesthetic. Its classic bomber silhouette and timeless appeal will make sure you look as good off the bike as you do on it.
Features:
True Fit
1.2mm Malibu Cowhide Leather (our softest cowhide)
Center zip style with traditional snap down collar
Banded wrist and waistband
Two conceal carry pockets with snaps and tapered holster
Action back
Contrast color under collar
Insulated liner
YKK zippers
Armor pockets for CE rated armor
Everyone loves a classic style motorcycle jacket! Channel your inner Terminator with this heavier weight jacket. Lots of pockets, including conceal carry pockets and armor pockets for CE rated armor. This jacket features a action back and insulated zip-out thermal liner.
Features:
1.3-1.4mm Drum Dye Naked Black Cowhide
Size down for best fit
Classic MC style with snap down collar and asymmetrical zipper
One zippered chest pocket
Two zippered slash pockets with leather lining
One patch pocket
Two conceal carry pockets with bullet snaps and tapered holsters
Zippered sleeves with gussets
Underarm grommets
Action back
Contrast color under collar
Insulated zip-out thermal liner
YKK zippers
Armor pockets for CE rated armor
ECE Approved / DOT Approved (FMVSS218 Approved)Durable and lightweight polycarbonate blend shellDual density EPS liner – two layers of EPS, one softer, one slightly harder combine to provide a more progressive impact absorption for different levels of impactVisionOptically superior clear face shield with anti-fog coating and durable hard coating for scratch resistanceTinted drop down inner sun shield. 100% UVA/B protection up to 400 nanometersShield lock provides piece of mindEasy shield changes quick, secure and tool less removal and installationComfort / LinerQwick - Dry® comfort liner and cheeks pads. Hydrophilic liner absorbs sweat and is perforated to provide plenty of ventilationSpeaker pockets built into the EPS for Bluetooth/Comm systemsRemovable, washable interior and removable chin curtainVentilationHigh-Flow ventilation system, 6 adjustable intake vents, 5 exhaust ventsRemovable breath deflector helps direct airflow upwards across the shield for fog free visionSoft fleece helmet bagOptional mirror & tinted shields availableAccessoriesOptional tinted and mirror shields available
The 7 Volt Hoodie from Gerbing is going to be your favorite jacket this year. Constructed out of a comfortable knit fabric, the Gerbing Hoodie has 3 large panels of powerful heat situated on the chest and back. Perfect for a lazy weekend tinkering in the garage or riding around town with your best buddies, whatever the situation, you’ll find yourself reaching for this classic again and again.
The Gerbing Heated Hoodie is built with Gerbing Microwire Technology that provides first-class heating performance. When you need the added heat to combat the cold, the Gerbing 7 Volt Heated Hoodie is the casual jacket option for which you've been waiting. Dial-in the heat and head outside!
HOW TO USE:
Charge Up– Fully charge 7V battery with provided charger cable.
Plug-In– Connect the battery.
Turn On– Press and hold touch-button control on the battery
Features:
Machine washable/gentle cycle
Powerful Microwire heating system includes 3 built-in heating panels strategically placed on the chest and upper back to warm your body
Touch-button control technology
2 pouch pockets plus hidden battery pocket
Zip-front sweatshirt hoodie
Ribbed cuffs and hem
Drawstring hood
Battery Voltage: 7 Volt
Colors Available: Black
Estimated Heating Times:
100% Power (4 red/blue lights) - 2 Hours
75% Power (3 red/blue lights) - 3 Hours
50% Power (2 red/blue lights) - 5 Hours
25% Power (1 red/blue lights) - 8 Hours
Details and Fit:
New Zealand Lambskin.
Front zipper closure.
Two inch Standup Collar.
Two hand pockets with snap closure.
Poly-filled liner.
One inside pocket with snap closure.
Clean by leather specialist.
Riding Flannel Shirt
This ain't your grandpa's riding jacket; no fringe, no frills - just function.
Dupont Kevlar fabric means this jacket is lighter weight, but just as protective as it's bulky forefathers. Take down any threat, whether pavement or punk, with CE rated armor AND a conceal carry pocket engineered by riders who actually carry.
Backed by our 2-year warranty, The Eagle Leather Jacked AF moto shirt is ready to ride.
100% Lined with 250g Dupont Kevlar
Removable CE Level 1 Armor included in elbows and shoulders (pocket in back for optional back armor)
Quick Access Concealed Carry Pocket
Gusseted Action Back Shoulders
Triple Stitch Reinforcements
Zippered Hand Pockets
YKK Metal Zippers
Snap Down Collar
2-Year Warranty
Size:
Across Shoulder
Sleeve
Chest
Back length
Waist
Small
17"
26"
44"
29"
40"
Medium
18.5"
26.5"
46"
29"
42"
Large
19"
27"
47"
29.5"
45"
X-Large
20"
27"
49"
30"
47"
2X-Large
20.5"
28"
50"
30"
48"
3X-Large
21"
29"
52"
31"
49"
4X-Large
22"
29"
56"
32"
54"
5X-Large
23.5"
30"
58"
32.5"
56"
Hit the road in style with the Kaneda Leather Jacket, featuring robust 1mm cowhide, advanced Armanox armor, and tailored for high-performance riding.
Set out on the road with the Kaneda Leather Jacket, a testament to the rider's fearless spirit and passion for freedom. Crafted from premium cowhide with a race-fit design, it perfectly aligns with your dynamic riding style, offering comfort and maneuverability. The integrated Armanox shoulder and elbow armor, coupled with optional back armor, provides unmatched protection, allowing you to tackle every journey with confidence.The Kaneda isn't just protective gear; it's a symbol of your relentless pursuit of adventure. Its perforated leather and stretch panels ensure ventilation and flexibility, making every ride not just a journey, but an extension of your indomitable will and unyielding courage. With the Kaneda, you're not just riding; you're making a statement.
SPECS
0.9 to 1mm genuine drum-dyed premium cowhide
Abrasion, impact, and tear resistance tested, CE certified AA EN 17092-2
Armanox brand shoulder armor is impact tested and CE certified to EN 1621-1 Level 1
Armanox brand elbow armor is impact tested and CE certified to EN 1621-1 Level 1
Race-fit with rotated sleeves and pre-curved arms for performance
Perforated leather at chest and back for high-level ventilation
Abrasion-resistant heavy-duty 4-way stretch material at key areas
External shoulder armor helps deflect impacts
Back armor pocket, in liner, for optional (not included) back armor
Accordion stretch panels alongside of back and elbow
NORU recommends using Molecule apparel care products to keep your gear at its best
2-year workmanship and materials warranty
The LS2 Infinity offers that ultimate sense of freedom riders want, wrapped in a technically advanced, modern, open-face motorcycle helmet design. Whatever your favorite style of riding, the Infinity offers all you need and more in a lightweight, open-face helmet.
SHELLMeets or exceeds DOT FMVSS 218 and ECE 22.06.1350 g +/- 50g.Sizes XS-3XL.Made from High Performance Fiberglass Composite (HPFC).4 Shells.Intermediate Oval.
COMFORTRemovable, washable, hypoallergenic liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Built-in sun shield.
Pinlock ready and pinlock shield included
SECURITYDOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATIONFully adjustable, multi-port dynamic, flow through ventilation with channeled EPS to keep you cool.
Keep your hands warm, even on the coldest riding days, with our premium 12V heated, insulated, and water-resistant Extreme hard knuckle gauntlet gloves. High-impact floating TPU knuckle, reinforced palm/finger, and pre-curved ergonomic fit, add the ultimate in safety and comfort. This glove is perfect for the daily commuter, or the world traveler who wants the "best-in-class" product. Our Extreme gloves are made to connect directly to the sleeve of your EX Pro Jacket or Jacket Liner in seconds or can be connected directly to your temperature controller with our Y-Harness (sold separately).
Features & Benefits:
Max Heat 135 F
Unisex Fit with Euro styling
Premium cowhide leather construction
Microwire™ heating throughout the glove, including to the tip of every finger
AQUATEX™ breathable water-resistant membrane
Reinforcements at palm and edge of the hand
150 grams of insulation
High-impact TPU floating knuckle protection
Impact protected gel pads on the palm of the hand
Pre-curved ergonomic fit
Touchscreen compatible index finger
Adjustable Velcro wrist closure
Full-length gauntlet
Gerbing 12V Extreme Hard Knuckle Glove Technical Specifications:
Battery Harness, Y-Harness & temperature controller required for stand-alone operation (sold separately)
Premium cowhide leather construction
150 grams of insulation
Max Heat: 135° @ 13W Each
Power: 12V DC 1.1 Amp Each
Gerbing 12V Glove Power Options:
1) Plugged directly into our heated jackets
2) Powered by Battery Harness and Y-Harness (temp controller or on/off switch recommended)
About the Gerbing 12V Power System: The Microwire heating system is powered by a simple connection to your vehicle's DC power system. Connects to your motorcycle, snowmobile, ATV, boat, or even airplane to keep you warm at the temperature of speed.Gerbing Microwire Heating: The Microwire system is the most durable and efficient thermo-technology platform ever developed. Products incorporating Microwire technology utilize patented micro-sized stainless-steel fibers intertwined and encased in a proprietary waterproof coating. Gerbing Microwire technology will provide even heating for ultimate comfort.
Bottom of Form
We recommend the use of a temperature controller with this product. Failure to do so may cause discomfort & burns.
OVERVIEWStart your day on the job site and end it on the open road without compromising safety or style. The Journeyman boot from Highway 21 is built to provide the strength and durability needed for today’s craftsman. Some things just get better with age. Work hard and play harder with the Journeyman boot.
Tech SpecsFull grain premium LeatherSympatex® - Weatherproof technologyWindproof, waterproof, and breathablePoron® XRD® ankle protectors on lateral and medial sidesVibram® sole - slip resistant , durable , and shock absorbingGusseted tongue for added weather protectionPerforated insole for maximum breathabilityReinforced toe and heel box provides support and impact protectionUnisex sizing
The Stated Shoe is Alpinestars modern interpretation of a retro street sneaker, combining the styling of minimalistic skate pumps with a vulcanized sole to create a protective yet supremely comfortable riding shoe with a stripped back, edgy style that looks great in any urban riding environment.
Split suede toebox for enhanced durability.
Classic lace closure at the front with a lateral zip for a secure, precise fit
Dual layer midsole support for optimal comfort and support.
OrthoLite® insole delivers long-term cushioning and high levels of breathability and comfort.
Integrated dual density ankle disks for impact protection with external multi-layer padding for additional coverage.
What makes this helmet stand out is that it’s one of the few helmets in the market that has both ECE 22.06 Certification and DOT, making it a reliable choice for riders who take safety seriously, all at a price point around $150.
Equipped with a drop-down sun visor, making it even more convenient for riders who want to enjoy their rides without the harsh glare of the sun.
If you’re looking for a helmet that doesn’t compromise on safety and comfort while staying within your budget, the Scorpion EXO helmet is the one for you!
RISK FREE: Try these pants risk free. For a limited time we are offering FREE return or exchange shipping on the new Ladies Kevlar Jeggings within 30 days of purchase in new condition.
At Eagle Leather, we are all about Gear for the Ride. We believe that the best way to help people wear all the gear, all the time is to make that gear cute and comfortable! Well, what is more comfortable than your favorite pair of sweatpants?
Now be the most cozy and the most protected with our new fully-Kevlar lined women's sweatpants! Safe has never felt so soft.
Specs:
Super stretchy and comfortable
Drawstring waist
Zippers ankle cuff
48% Cotton + 46% Polyester + 6% Spandex
Protection: CE EN1621-1
Reinforcements: 100% Dupont KEVLAR Fiber
YKK Zippers
Pockets for optional armor (sold separately)
Size chart disclaimer: These sweatpants are very stretchy! Measurements for hip and thigh are measured as the material is relaxed. Stretch can add 2"-4" to these measurements.
Size:
Waist:
Inseam:
Hip:
Thigh
X-Small
26"-30"
30"
32"
18"
Small
27"-32"
30"
35"
19"
Medium
30"-33"
30.5"
37"
19"
Large
32"-35"
30.5"
38"
20"
X-Large
34"-37"
30.5"
41"
20"
2X-Large
36"-40"
30.5"
44"
21"
3X-Large
37"-42"
31"
46"
23"
The Strobe II modular helmet features a Kinetic Polymer Alloy (KPA) shell, offering state-of-the-art energy managing flexibility. The Strobe II meets or exceeds the ECE 22.06 rotational energy management criteria using LS2’s proprietary Advanced Rotational Energy Management (AREM) technology. ECE homologated as both an open face and full-face (ECE P/J rated), this helmet offers amazing flexibility and is able to be used with the chin bar down for highway riding, or up when circulating a parking lot, stopped to take a photo, or talking to your riding buddies at a rest stop. A convenient built-in, drop-down sun shield adds to this flexibility and makes it a breeze to get the shield up and out of the way when entering a tunnel or shadowed area. Removeable, washable liner with special flex-crown system is super comfortable and easy to keep fresh.
Features:
Kinetic Polymer Alloy (KPA) shell offers better energy managing flexibility
Intermediate Oval fit
Modular helmet
Quick release chin strap
Built-in drop-down sun shield
Clear Pinlock-ready face shield (Pinlock sold separately)
Moisture-wicking helmet liner and cheek pads
Meets ECE 22.06 Rotational Energy Management requirements using LS2 AREM technology
Meets or exceeds ECE 22.06 and DOT FMVSS standards
PRODUCT FEATURES:
Lambskin leather
Asymmetrical zipper front
Long sleeves
Wind resistant shell
Gold-tone hardware
Lined
Four pockets
FITSIZING:
Slim fit
Designed to hit just below the waist
Lightweight
FABRIC CARE:
Polyester lining
Dry clean
Imported
LS2 Metropolis Evo JacketThe LS2 Metropolis Evo Jacket stands as the perfect everyday jacket designed for all seasons. Crafted from Polyester 450D Oxford fabric, it encompasses waterproof and removable thermal liners, guaranteeing customized comfort for every ride. The removable CE Level 1 shoulder and elbow protectors, when combined with the optional LS2 851 Level 2 back protector (sold separately), offer comprehensive protection at crucial impact zones. Tailor the fit with cuff, arm and collar adjustment straps, ensuring extra room in all the right places. With six total pockets, everything is stored within easy reach.
Construction:
- Polyester 450D Oxford fabric- Fixed breathable waterproof membrane lining (5000mm)- Air permeability (3000g/m²/24h)
Protection:
- Removable CE Level 1 soft slow bounce shoulder and elbow protectors EN1621-1: 2012- Elbow protectors with 2 adjustable positions- LS2 851 Level 2 back protector (sold separately)
Features:
- Removable thermal jacket- Back and sleeve ventilation zippers- Arm, cuff and waist adjustments- Two Chest pockets- Two Front pockets- Two inside pockets- Reflective strips
All New Eagle Leather EXCLUSIVE Ladies Riding Jeggings.
We've been fitting women for riding gear since 1995 and these might be our favorite pants yet - high waisted, stretchy and comfortable with generous sizing. Real pockets on the front AND the back. No more toddler pockets! Put your phone in there, girl!
Oh and we didn't even mention that these are protective as hell - Dupont Kevlar in the rear and down the front of the thighs. Plus, armor pockets in the hip and knee (armor sold separately).
Whether you plan to violently crash into the unforgiving pavement, or simply go out for a fun night with friends - these pants will make sure you're safe and look great doing it.
Specs:
Composition: 70% Cotton + 28% Polyester + 2% Spandex
Reinforcements: 100% Dupont Kevlar
YKK metal zipper closure
Belt loops
REAL pockets in the front and rear
Generous fit
High waisted
Pockets for amor in hips and knees (armor sold separately)
Backed by our Eagle Leather 2 Year Warranty
RISK FREE: Not convinced? Try these pants risk free. For a limited time we are offering FREE return or exchange shipping on the new Ladies Kevlar Jeggings within 30 days of purchase in new condition.
Size chart disclaimer: These jeggings are very stretchy! Measurements for hip and thigh are taken as the material is relaxed. Stretch can add 2"-4" to these measurements.
Size
Waist
Hip
Inseam
Thigh
X-Small
26"-30"
34"
31"
18"
Small
27"-34"
36"
31"
19"
Medium
28"-36"
38"
32"
20"
Large
30"-38"
38"
32"
21"
X-Large
34"-40"
40"
32"
22"
2X-Large
36"-42"
42"
32"
24"
3X-Large
38"-44"
44"
32"
25"
Features of Savior Heating Gloves:High-Quality Material:
All Leather Construction: Made from genuine sheepskin, Savior heating gloves offer superior waterproof and windproof capabilities compared to other materials.
Touch Screen Compatibility: The index finger and thumb tips are crafted from the latest sensitive touch screen materials, providing a smooth experience suitable for smartphones, tablets, and other smart devices.
Adjustable Heating Controls:
Three Heating Levels: The gloves feature three heating settings. The high setting (3 lights on) delivers 99% heat for about 2-2.5 hours, the medium setting (2 lights on) provides 66% heat for about 3.5 hours, and the low setting (1 light on) offers 33% heat for 6-7 hours.
Easy Operation: By clicking the on/off button, you can easily adjust to the desired temperature, making it user-friendly for all age groups.
Battery and Charging:
Efficient Power System: Includes a 7.4v 2200mAh lithium polymer battery charging kit certified by CE&FCC.
Dual Charging Capability: The charger’s dual charging wires allow for simultaneous charging of two batteries, which takes about 4 hours for a full charge.
Ideal for Winter Sports:
Far-Infrared Heating: Utilizing far-infrared fiber heating elements across the entire back of the hand and fingers, these heated leather gloves are perfect for winter activities such as skiing, snowboarding, snowshoe walking, snowmobiling, hunting, ice fishing, sledding, motorcycle riding, cycling, and snow shoveling.
Usage & Wash & Care & Warranty
Directions for use:
Be sure to remove the battery from the glove before charging.
Charge the battery at room temperature for 4 hours before first use.
While charging, the LED on the charger will turn red.
When charging is complete, the LED on the charger will turn green.
Carefully connect the power wire inside the glove battery compartment to the battery.
Place the battery into the glove battery compartment and secure it in place with the Velcro at the top.
Wash and Care:
Remove the batteries from the gloves before cleaning or storing.
Do not machine wash, machine dry, bleach, iron, or dry clean.
Spot clean the gloves by hand using mild detergent.
Air dry the gloves by laying them flat.
Attention:
Always remove the batteries from the gloves before charging.
Do not drop, short circuit, or expose the gloves’s batteries to high temperatures.
If the battery becomes swollen or deformed, please stop using it immediately.
How to Prolong the Service Life of Heated Glove Lithium Battery:
Avoid Full Discharge: Try not to fully discharge the battery before recharging. Lithium batteries tend to have a longer lifespan when they are not completely drained. Recharge the battery before it reaches a critically low level.
Proper Charging: Use the recommended charger for your heated gloves and ensure you follow the manufacturer’s instructions for charging. Avoid overcharging the battery, as it can shorten its lifespan. Disconnect the charger once the battery is fully charged.
Storage: If you won’t be using the heated gloves for an extended period, store the battery in a cool and dry place. It’s recommended to partially charge the battery (around 50%) before storing it. This helps to maintain the battery’s health during storage.
Regular Use and Maintenance: Lithium batteries benefit from regular use. If possible, use the heated gloves and recharge the battery periodically, even during off-seasons. This helps in maintaining the battery’s capacity. Additionally, keep the battery and glove compartment clean and free from debris.
Avoid Extreme Temperatures: Extreme temperatures, both hot and cold, can negatively impact the battery’s performance and lifespan. Avoid exposing the battery to extreme heat or cold conditions.
Battery Replacement: If you notice a significant decrease in the battery’s capacity or if it becomes swollen or damaged, it’s advisable to replace the battery with a new one from a reputable source.
Built to keep you dry from the waist down, the PDX3™ overpant is ready for street action. It is constructed from a fully-taped Hycor waterproof/breathable material and reinforced with 300d poly in critical zones. Additionally, the CE-certified PDX3 is equipped with D3O impact knee protectors for complete coverage
Tech SpecsDurable leather upper constructionHydraguard waterproofingBreathable mesh comfort linerOil & Crush resistant soleComposite shank isolates your foot from engine vibrationDual density ankle protectorsReinforced Toe and heel boxes for strategic support & impact performanceMetal eyelet lace guides for customized fitRemovable and replaceable comfort insolesUnisex sizing
Love some leather fringe? So do we. The Bandita vest is perfect for getting your fringe in the wind on a motorcycle ride! This vest has more fun details, including purple double diamond quilted sides and kidney area. Lots of pockets, conceal carry pockets and a back armor pocket makes this a perfect addition to your gear closet.
Features:
8-0.9mm Naked Cow Diamond
Women's Light Weight Fringe Vest
Purple Stitching Throughout
Double Diamond Quilted Sides and Kidney Area
V-Neck Design with exposed Main Zipper
Two Horizontal Lower Zippered Pockets
Branded First Classic Authentic YKK Hardware
Interior Conceal Carry Pockets w/ Bullet Snaps
Black Mesh Inner Liner
Back armor pocket for CE Level 2 armor
Heavy non-rusting and non-corroding snaps
Experience protection and comfort while riding with our Men's Kevlar Armored Motorcycle Riding Jeans! The Kevlar material in the seat and knee offers unmatched abrasion resistance for added safety. Plus, the removable knee armor allows for easy customization and convenience. Ride with confidence knowing you have the best in protection and style.
This Style by Unik Riding Gear redefines comfort and functionality with its black and white flannel shirt design. This versatile garment seamlessly blends style with motorcycle-ready features, making it a standout choice for riders and fashion-conscious individuals alike. This flannel shirt not only meets the demands of motorcycle riders with its protective features but also appeals to anyone seeking a stylish yet functional addition to their wardrobe.
Key Features:
Material: Made from durable cotton, offering comfort and breathability.
Color: Available in a variety of colors.
Design: Features antique silver hardware for a vintage aesthetic.
Closure: Front zip and snap closure for secure and easy wear.
Pockets: Includes 2 exterior chest pockets and 2 hand warmer pockets for convenience.
Concealed Carry: Equipped with 2 interior concealed carry pockets for discreet storage.
Protection: Removable armor in elbows, shoulders, and back for enhanced safety.
Enhanced Durability: Kevlar reinforcement in elbows and shoulders for added protection against abrasions.
Sizes: Available in sizes ranging from S to 5XL, ensuring a comfortable fit for various body types.
Origin: Proudly made in Pakistan, known for quality craftsmanship and attention to detail in garment manufacturing.
LS2 Spitfire Helmet
The LS2 Spitfire Helmet starts with a lightweight shell. Add a built-in, drop down inner sun shield. Build the rich comfort padding out of hypoallergenic and breathable materials and add a built-in ventilation system to allow fresh air to pass through the material, keeping you cool and dry. The 3D laser cut interior offers the perfect fit, with no hot spots, for all day comfort. Finish it off with a DOT-approved quick release chinstrap, and you have a modern, comfortable helmet with the retro style you love.
Features
Built-in sun shield
Ventilated, hypoallergenic comfort padding to keep you cool
Quick release chinstrap
DOT approved
