Motorcycle Comfort Gear – Ride Longer, Ride Easier

Add Comfort Without Replacing Your Motorcycle Seat The Foldable Motorcycle Gel Seat Cushion is a simple way to make a firm stock seat more comfortable for commuting, day trips, and long distance rides. Its flexible two section design follows the shape of the seat while supporting the rider across a broader area. Inside the breathable cover, a high elasticity TPE gel core uses a three dimensional honeycomb structure to flex under pressure, spread weight more evenly, and help soften road vibration. Air channels through the honeycomb structure and center groove help reduce heat and moisture buildup during warm weather riding. Why Riders Choose It Honeycomb TPE gel helps distribute pressure across the hips and tailbone Flexible construction cushions road vibration without permanently modifying the motorcycle Breathable mesh cover and internal air channels promote airflow Dual adjustable straps secure the cushion beneath the seat Nonslip rubber mesh underside helps reduce shifting Foldable design fits more easily in a saddlebag, trunk, or backpack Suitable for many cruiser, touring, sport, adventure, scooter, and passenger seats Installation Position the cushion where it provides the best support without interfering with normal riding controls. Route both attachment straps securely beneath the motorcycle seat and tighten them evenly. For easier installation, remove the seat from the motorcycle first, fasten the straps, and then reinstall the seat. Confirm that the cushion cannot slide and that the straps are clear of hot surfaces, sharp edges, and moving parts before riding. Fit Notes This is a universal fit accessory, but motorcycle seats vary considerably. Check the product dimensions shown in the images and make sure your seat provides enough room to route both straps securely. The cushion is approximately 1.2 inches thick before compression, so it may slightly change seated height and reach to the ground. Care Wipe the cover with a damp cloth and mild soap as needed. Allow the cushion to air dry completely before storage. Do not machine dry, bleach, or place it near direct heat. Remove and store the cushion when the motorcycle will be left exposed to severe weather for an extended period. Included One foldable motorcycle gel seat cushion Integrated dual attachment straps

Read more less

Features: Easy to install, no tools required Install or remove in seconds Relieves stress on your wrist on long trips Rests on the brake lever to hold the throttle open Roll off the throttle manually to disengage Go Cruise

Read more less

Adjustable air-cell comfort for longer days in the saddle. Long rides are easier when pressure is spread across the seat instead of concentrated in one spot. The Inflatable Airbag Seat Cushion uses an adjustable 3D air-cell structure to distribute weight, help cushion road vibration, and keep air moving beneath the rider. Add or release air to fine-tune the feel for your motorcycle, body, and riding distance. Key Features Press-to-inflate adjustment: Built-in inflation and deflation controls let you add or release air to tune firmness. Pressure-distributing 3D air cells: The varied cell shapes support multiple contact points and spread rider weight to help reduce concentrated pressure. Vibration cushioning: The air-cell structure helps absorb road shock and vibration for more comfortable miles. Breathable airflow: Spaces between the raised cells promote ventilation and moisture management. Anti-slip base: Anti-slip cloth helps keep the cushion positioned on the motorcycle seat. Universal motorcycle use: Sized for a broad range of rider and passenger seats. How to Adjust Place the cushion on the seat with the tapered end toward the front. Use the press-to-inflate control to add air. Sit on the cushion and release small amounts of air until your weight is supported across multiple cells. Specifications Dimensions: 15.56 × 14.38 × 1.38 in (395 × 365 × 35 mm) Net weight: 7.4 oz (210 g) Maximum load: Manufacturer-rated up to 440 lb (200 kg) Operating temperature: Manufacturer-rated from -22°F to 158°F (-30°C to 70°C) Materials: Polyester/Lycra fabric, TPU, PU, nonwoven material, and anti-slip cloth Color: Black with red perimeter stitching Fit and Care Designed for motorcycle rider and passenger seats and compatible electric-mobility seats. Measure your seating area to confirm coverage. Wipe clean with mild soap and water, then air dry. Avoid sharp objects and prolonged direct heat. Do not machine wash or iron. Store flat and slightly deflated when not in use.

Read more less

Ventilated comfort without an air valve. The Motorcycle Seat Air Gel Cushion uses a flexible TPE honeycomb core to spread pressure, cushion road vibration, and allow air to move beneath the rider. The removable mesh cover, anti-slip underside, and two retaining straps provide a practical comfort upgrade for longer rides and warm-weather riding. Key Features Flexible TPE honeycomb core: The hollow structure flexes under the rider to help distribute weight and reduce concentrated pressure. Shock and vibration damping: The resilient honeycomb construction helps absorb bumps and road vibration for a more comfortable ride. Open airflow design: Ventilation channels allow heat to dissipate instead of becoming trapped against the seat. Breathable removable cover: The mesh surface allows air to pass through while protecting the honeycomb core. Anti-slip underside: A textured base helps resist movement on the motorcycle seat. Two retaining straps: Elastic straps secure the cushion beneath the seat and help keep it positioned while riding. Specifications Front-to-back length: Approximately 15.0 in (38 cm) Widest point: Approximately 14.4 in (36.5 cm) Narrowest point: Approximately 6.7 in (17 cm) Thickness: Approximately 1.4 in (3.5 cm) Weight: Approximately 1.8 lb (800 g) Core material: TPE Construction: Hollow honeycomb structure Color: Black Fit and Installation Measure the motorcycle seat to confirm coverage before purchasing. Position the wide, rounded end toward the rear and the tapered end toward the front. Route the two retaining straps securely beneath the seat. Confirm that the cushion remains secure and does not interfere with seat latches or surrounding components before riding.

Read more less

Comfort for the Passenger Seat Add cushioning to a compact motorcycle passenger seat without making a permanent change. The flexible AirGel pad uses a three dimensional honeycomb structure to help distribute pressure, absorb vibration, and allow air to circulate during the ride. Features Silica gel construction provides flexible support and shock absorption Open honeycomb structure promotes airflow and helps reduce heat buildup Compact shape is designed for rear passenger and pillion seats Textured underside helps resist slipping Elastic securing straps hold the cushion in place Gel construction can be rinsed clean and left to air dry Black finish blends with most motorcycle seats Size and Fitment Measures approximately 21 cm by 28 cm by 3 cm. Fits many compact motorcycle passenger seats, but seat shapes and dimensions vary. Measure the intended seating area before ordering. Installation Center the cushion on the passenger seat and route the straps securely beneath the seat. Confirm that the cushion cannot slide or interfere with the rider before carrying a passenger. Included: One Pillion AirGel Seat Cushion with securing straps.

Read more less