Sale Modular Helmets

The LS2 Advant X Forged Gloss Carbon combines a distinctive carbon finish with a touring-friendly, 180-degree modular design. Rotate the chin bar to the rear for an open-face configuration, then use the separate internal sun visor and adjustable vents to adapt to the day's conditions.Exact Finish and ModelThis is LS2's gloss forged-carbon shell version with a matte-black painted, woven-carbon chin bar. The irregular forged-carbon pattern on the shell contrasts with the understated black chin section. This listing covers part numbers 901-2131 through 901-2137, depending on size.Carbon Construction and SafetyThe shell and chin bar use carbon-fiber construction. Two shell sizes cover the range, with a multi-density EPS liner designed to manage impact energy. The Advant X Carbon meets DOT FMVSS 218 and ECE 22.06, with P/J approval for both open-face and full-face configurations.180-Degree Modular DesignThe chin bar rotates fully to the rear of the helmet, giving you an open-face configuration without leaving the bar above your forehead. A micrometric metal buckle secures the reinforced chin strap. Emergency-release cheek pads are designed to assist helmet removal when needed.Shield and Sun ProtectionThe quick-release outer shield is scratch-resistant and UV-resistant. A Pinlock MaxVision anti-fog insert is included, and the integrated drop-down sun visor helps manage glare as light conditions change. Retract the tinted sun visor for nighttime riding or poor visibility.Ventilation and ComfortAdjustable intake vents, rear exhaust ports and channels in the EPS liner move air through the helmet. The removable, washable comfort liner helps manage moisture, while laser-cut cheek-pad foam supports an even fit. Try the helmet on long enough to check crown contact and cheek pressure before choosing your size.Communication-System ReadinessBuilt-in speaker recesses accommodate a compatible communication system, sold separately. LS2 specifies adhesive mounting for its LS2 Intercom on the Advant X Carbon. Follow the system's installation instructions and confirm that the speakers and wiring do not alter the helmet's fit.Size Chart Size Head circumference (cm) X-Small 53-54 Small 55-56 Medium 57-58 Large 59-60 X-Large 61-62 2X-Large 63-64 3X-Large 65-66 Measure around the widest part of your head above the eyebrows, keeping the tape level. Use the chart as a starting point and try the helmet on with the strap secured. The fit should be snug and even without painful pressure.Warranty SupportContact Eagle Leather for help with LS2 USA warranty coverage and claims. Keep your purchase receipt and the helmet's identifying labels; coverage is subject to the applicable manufacturer's terms. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently, even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets, often approaching 1,000 units, across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

i90 Modular Helmet Solid Color Gloss Black,Matte Black,Wine,White HELMET SIZING CHART SIZE CENTIMETER HAT SIZW INCHES 2X-Small 51-52 6 3/8 – 6 1/2 20 – 20 1/2 X-Small 53-54 6 5/8 – 6 3/4 20 7/8 – 21 1/4 Small 55-56 6 7/8 – 7 21 5/8 – 22 Medium 57-58 7 1/8 – 7 1/4 22 1/4 – 22 7/8 Large 59-60 7 3/8 – 7 1/2 23 1/4 – 23 5/8 X-Large 61-62 7 5/8 – 7 3/4 24 – 24 3/8 2X-Large 63-64 7 7/8 – 8 24 3/4 – 25 1/4 3X-Large 65-66 8 1/8 – 8 1/4 25 5/8 – 26 4X-Large 67-68 8 3/8 – 8 1/2 26 3/8 – 26 3/4 5X-Large 69-70 8 3/4 – 8 3/4 27 1/4 – 27 5/8 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Shoei Neotec II is a proven premium modular touring helmet that combines flip up convenience with a stable aerodynamic shell, integrated sun protection, adaptable ventilation, and a removable comfort liner. It is designed for commuting and long distance riders who regularly move between highway travel, fuel stops, and face to face conversations. Modular convenience A large glove friendly release opens the chin bar smoothly, while a secure metal locking system provides positive engagement when closed. The chin bar and shell were engineered as a complete system for controlled operation and balanced weight. Advanced shell construction Advanced Integrated Matrix shell combines fiberglass and organic fibers Multi density EPS liner manages impact energy across different zones Aerodynamic shell shape was refined in Shoei’s wind tunnel DOT approved for street use Highway stability and wind management An integrated rear spoiler, lower Aero Deflector, and carefully placed Vortex Generator shapes help control lift and turbulence. Noise Isolator cheek pads improve the seal around the neck area and help reduce unwanted air entering from below. Riding position, motorcycle windscreen, and individual fit will still affect perceived sound. Adjustable ventilation A lower intake directs air toward the shield area. The three position upper intake feeds cooling air through channels in the EPS liner, while rear exhaust outlets release heat and humidity. CNS 3 shield and internal sun visor Broad shield provides a generous field of view Tool free shield system simplifies removal and cleaning Pinlock ready design accepts the compatible anti fog insert Built in sun visor deploys with an external slider Sun visor storage is designed to preserve EPS thickness Touring comfort The three dimensional interior is fully removable and washable. Replaceable cheek pads and center pads allow fit tuning and help extend service life. A stainless steel micro ratchet closure provides quick and repeatable adjustment. Communication integration The Neotec II was designed for clean installation of compatible Sena SRL and SRL2 communication systems. The purpose built mounting areas keep the system close to the shell and avoid a bulky universal clamp. Approximate weight: 4.09 pounds in size Medium. Actual weight varies by shell and size.

Read more less