Motorcycle Helmets on Sale – Protect What Matters Most

i90 Modular Helmet Solid Color Gloss Black,Matte Black,Wine,White HELMET SIZING CHART SIZE CENTIMETER HAT SIZW INCHES 2X-Small 51-52 6 3/8 – 6 1/2 20 – 20 1/2 X-Small 53-54 6 5/8 – 6 3/4 20 7/8 – 21 1/4 Small 55-56 6 7/8 – 7 21 5/8 – 22 Medium 57-58 7 1/8 – 7 1/4 22 1/4 – 22 7/8 Large 59-60 7 3/8 – 7 1/2 23 1/4 – 23 5/8 X-Large 61-62 7 5/8 – 7 3/4 24 – 24 3/8 2X-Large 63-64 7 7/8 – 8 24 3/4 – 25 1/4 3X-Large 65-66 8 1/8 – 8 1/4 25 5/8 – 26 4X-Large 67-68 8 3/8 – 8 1/2 26 3/8 – 26 3/4 5X-Large 69-70 8 3/4 – 8 3/4 27 1/4 – 27 5/8 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Advanced abs/polycarbonate alloy shell passes DOT standardsDual forehead vents are closable and direct air into the helmetComfortable brushed nylon interior with padded chinstrap3-snap removable bubble visor5-snap shell design will accept most face shields (not included)Spacious ear pockets for accepting speakers Z1R HELMET SIZING CHART SIZE HAT HEAD(CM) HEAD(IN) Medium 7 1/8 - 7 1/4 57 - 58 22 3/8- 22 3/4 Large 7 3/8 - 7 1/2 59 - 60 23 1/8 - 23 1/2 X-Large 7 5/8 - 7 3/4 61 - 62 24 -24 3/8 2X-Large 7 7/8 - 8 63 - 64 24 3/4 - 25 1/8

Read more less

SPECS Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfort using advanced CAD technology. Urban Daily Helmet for Commuting. “ACS” Advanced Channeling Ventilation System: Full front-to-back airflow flushes heat and humidity up and out. Pinlock Pin Prepared HJ-34 Shield: Provides 99% UV protection; Wide shield enhanced visibility. RapidFire™ Shield Replacement System: Simple and secure shield ratchet system provides ultra-quick, tool-less shield replacement. Aerodynamic 3D Shield Design: Reduces the wind turbulence and wind blowing onto the face area. Integrated Sun Visor: Black Dark Smoke sun shield deploys quickly and easily; Better peripheral vision; Anti-Scratch coated. New Easy-To-Use Sun Visor Lever: operates smoothly and quietly. Interior provides enhanced moisture-wicking and quick drying function. Crown and Cheek pads: Removable and washable. Cheek pads: interchangeable throughout all shell sizes. Glasses Grooves: Accommodates riders who wear eyeglasses and sunglasses. Speaker pockets: for Bluetooth communication. Ready for Bluetooth (Bluetooth sold separately). HJC i30 Helmet Solid Color Gloss White,Wine,Gloss Black,Matte BlackSize X-Small,Small,Medium,Large,X-Large,2X-Large HELMET SIZING CHART SIZE CENTIMETER HAT SIZW INCHES X-Small 53-54 6 5/8 – 6 3/4 20 7/8 – 21 1/4 Small 55-56 6 7/8 – 7 21 5/8 – 22 Medium 57-58 7 1/8 – 7 1/4 22 1/4 – 22 7/8 Large 59-60 7 3/8 – 7 1/2 23 1/4 – 23 5/8 X-Large 61-62 7 5/8 – 7 3/4 24 – 24 3/8 2X-Large 63-64 7 7/8 – 8 24 3/4 – 25 1/4 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Equipped with many of SHOEI’s top features while keeping functionality efficient and to the point, the all-new RF-SR is anything but “entry level”. Boasting a compact, aerodynamic shell design along with sharp and aggressive styling, the RF-SR has a progressive look all of its own. Exceptional airflow, an advanced shield system, and a fully removable liner allow the RF-SR to excel whether short-distance street performance or long-distance touring comfort is your jam. The RF-SR–Streamlined functionality and affordability with premium SHOEI quality. Advanced short-distance street performance and long-distance touring comfort Compact, aerodynamic shell design with sharp and aggressive styling Optimal shell aerodynamics and liner components reduce unwanted road noise Matte black ventilation components enhance aggressive styling Streamlined function and affordability VENTILATION PERFORMANCE Fine-tuned in SHOEI’s state-of-the-art wind tunnel to optimize the important balance between airflow and a quiet ride, the RF-SR is equipped with three (3) adjustable air intakes and two (2) exhaust outlets to help customize your ventilation in every condition. Large lower vent shutter for ease of use with riding gloves Two upper air vents for optimal air intake Two uniquely-positioned upper exhaust vents for improved negative pressure suction Wind-tunnel optimized to balance enhanced airflow and silence SHIELD SYSTEM The RF-SR’s shield system provides a vast field of vision that rivals helmetless peripheral, features innovative ribs to improve rigidity and eliminate bending, and facilitates quicker shield changes than ever before. CWR-1 SHIELD Protects from 99% of the sun’s damaging UV rays 3D injection-molding ensures distortion-free view throughout the entire field of vision Innovative new ribs on top and bottom edge improve rigidity and eliminate bending Improved shield locking mechanism Comes equipped with Pinlock® EVO fog-resistant system QR-E BASE PLATE SYSTEM Facilitates quick and smooth shield changes SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal Strengthened springs for more precise functionality Five-stage rotating dial for shield/base plate fine-tuning SAFETY Few characteristics of a motorcycle helmet are as critical as its first and second layers of defense, which is precisely why the RF-SR features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell and Dual-Layer, Multi-Density EPS liner. MULTI-PLY MATRIX AIM+ SHELL Proprietary technology integrates a six-ply matrix Hand-laid interwoven layers of fiberglass with organic fibers and resin SHOEI’s strongest, lightest, most elastic shell DUAL-LAYER MULTI-DENSITY EPS LINER Provides enhanced impact absorption by utilizing varying densities of foam Allows cooling air to travel unrestricted through tunnels created in the EPS Precise placement of multi-density EPS material yields a more compact, lightweight design EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.) Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck COMFORT The RF-SR is equipped with a fully removable, washable, adjustable, and replaceable interior system that’s been enhanced for a comfortable fit and maximum helmet stabilization during high-speed riding. Fully removable, washable, replaceable and adjustable Three-dimensionally shaped to match the contours of a rider’s head Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization Cheek pad channel for eyeglasses HELMET SIZE CHART SIZE HAT SIZE CM INCHES X-Small 6 5/8 - 6 3/4 53-54 20 7/8 - 21 1/4 Small 6 7/8 - 7 55-56 21 5/8 - 22 Medium 7 1/8 - 7 1/4 57-58 22 1/2 - 22 7/8 Large 7 3/8 - 7 1/2 59-60 23 1/4 - 23 5/8 X-Large 7 5/8 - 7 3/4 61-62 24 - 24 3/8 2X-Large 7 7/8 - 8 63-64 24 3/4 - 25 1/8 3X-Large 8 1/8 - 8 1/4 65-66 25 5/8 - 26 HOW TO MEASURE YOUR HEAD SIZE To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead). Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets. THE PERFECT FIT No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.

Read more less

The LS2 Stream II is a sport-styled urban-touring full-face helmet designed for commuting, touring and everyday road use. Its aerodynamic Kinetic Polymer Alloy shell balances durability with managed flexibility, while three shell sizes help keep the exterior profile more proportional across the size range. Features and Rider Benefits Kinetic Polymer Alloy shell provides a lightweight, durable structure with controlled flexibility Three shell sizes and a multi-density EPS system support a more proportional, closely tuned fit Pinlock 70 MaxVision-ready face shield helps riders add fog-management capability; insert sold separately unless otherwise stated Scratch-resistant, UV-resistant shield with a quick-release mechanism simplifies cleaning and shield changes Internal drop-down sun visor offers convenient glare reduction without changing the outer shield Top and chin ventilation with rear exhaust ports and channeled EPS promote airflow through the helmet Removable, washable, hypoallergenic liner with laser-cut foam supports comfort and easier care Micrometric buckle provides quick, repeatable fastening Ready for compatible LS2 intercom installation Manufacturer-listed weight is approximately 1,550 g, plus or minus 50 g. Weight can vary by size and configuration. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Customized Comfort: Our skull cap biker helmet is designed to snugly hug your head, delivering superior comfort and security. With three different shell sizes, you'll enjoy a motorcycle half helmet that offers a proportionate fit for your unique needs. Effortless Adjustability: Our motorcycle half helmet features a convenient Nylon Y-Strap Retention System with a sliding adjuster, ensuring a secure fit. The Quick Release Lock, equipped with a one-finger release lever, makes detaching the helmet a breeze, providing both security and ease of use for riders who prefer small dot approved helmets. Customizable and Comfortable: Our helmet for motorcycles provides versatility, with options available both with and without visors to suit your preference. Inside, the dual-density EPS liner provides excellent impact absorption, while the moisture-wicking inner liner fabric ensures a cool and comfortable ride in warm weather. Versatile Protection: Our motorcycle helmets are more than just headgear—they're your essential riding companion, providing safety and comfort on motorcycles, cruisers, scooters and mopeds. Ride with confidence, knowing you have certified protection.

Read more less

The Evolution of Perfection is a fitting tagline for the longest-standing, most decorated full-face helmet model in the SHOEI lineup, the RF. The process of improving is a constant evolution, and with a world-class team of designers and engineers leading the charge, we pushed our resources and technologies to the brink, utilizing our state-of-the-art wind tunnel facility, extensive array of proprietary materials, and the industry’s most stringent quality assurance practices to develop the all-new RF-1400. SHOEI’s lightest and most compact SNELL-approved full-face helmet model, the RF-1400 has evolved the pursuit of perfection to the next level. Evolved design, functionality and performance over its predecessor Wind tunnel-tested and refined aerodynamics and ventilation performance Compact, aerodynamic shell shape with integrated spoiler SHOEI’s lightest SNELL-approved full-face helmet model All-new shield and base plate system for optimized visibility and performance Noise-reduction technology reduces unwanted wind and road noise AERODYNAMICS Developed and refined in SHOEI’s state-of-the-art, in-house wind tunnel facility from the very beginning stages of life, the RF-1400 boasts impressive improvements in aerodynamic performance, including a 6% reduction in lift and a 4% reduction in drag (as compared to the RF-1200). Optimal shell aerodynamics not only improves the helmet’s ability to cut through air, it also contributes to a welcomed reduction in wind noise without blocking the road’s valuable informative sounds. Learn More Developed and refined in SHOEI’s state-of-the-art wind tunnel facility Compact, aerodynamic shell shape with integrated spoiler Strategically-shaped air intake and exhaust vents help streamline the overall profile Boasts impressive improvements in aerodynamic performance and reduces the forces placed on a rider’s head Lift reduction (upward lift forces): -6%* Drag reduction (forward drag forces): -4%* * Reference value comparison measured using SHOEI’s in-house wind tunnel testing facilities (RF-1400 vs. RF-1200). ADVANCED NOISE REDUCTION Optimal shell aerodynamics reduce wind noise around the helmet Vortex Generators on the sides of the shield reduce wind turbulence All-new, airtight window beading provides wind/waterproof seal New, voluminous cheek pads and removable ear pads further restrain wind noise inside the helmet The RF-1400 provides an incredibly quiet riding experience without blocking the road’s informative sounds VENTILATION PERFORMANCE Utilizing SHOEI’s in-house wind tunnel to help reveal the optimal balance between airflow and silence, SHOEI designers relocated the center/forehead vent, and also equipped it with an additional air intake hole, to help increase the volume of cooling air entering the helmet. Additionally, a new, enlarged exhaust outlet vent helps take better advantage of negative pressure suction at the rear of the helmet, yielding improved hot-air expulsion. Wind tunnel-optimized to provide the perfect balance between airflow and silence Relocated center/forehead vent is equipped with an additional air intake hole for greater airflow into the helmet Upper air intake holes have been enlarged for optimal performance New, enlarged exhaust outlet vent for improved hot-air expulsion Large 3-position lower vent shutter for ease of use with riding gloves Features six (6) air intake vents and four (4) exhaust outlets SHIELD SYSTEM The all-new CWR-F2 shield system features improved visibility, functionality, and performance over its predecessor. The 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility for a more natural view, Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise, and an all-new center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates. CWR-F2 SHIELD Protects from 99% of the sun’s damaging UV rays 3D injection-molding ensures distortion-free view throughout the entire field of vision 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility Vortex Generators improve shield aerodynamics and reduce wind noise All-new, conveniently located center locking mechanism evenly distributes shield forces across both base plates PINLOCK EVO fog-resistant system is 10% larger for improved lateral vision CWR-F2 BASE PLATE SYSTEM Completely redesigned to facilitate quicker, smoother shield changes New shield adjuster mechanism provides easier, more precise tuning Redesigned base plate gear has all-new “first position” shield opening feature for advanced venting and defogging SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal All-new airtight window beading reduces wind and water intrusion SAFETY Helmet functionality and performance are paramount to the overall riding and racing experience, but safety provides the critical foundation that a premium helmet is built upon. The RF-1400 features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell, proprietary Dual-Layer/Multi-Density EPS liner, and the Emergency Quick Release System (E.Q.R.S.). MULTI-PLY MATRIX AIM+ SHELL Proprietary technology integrates a multi-ply matrix specifically designed to meet both SNELL M2020 and DOT standards Hand-laid interwoven layers of fiberglass with lightweight organic and high-performance fibers Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight SHOEI’s strongest, lightest, most elastic shell provides optimal impact absorption DUAL-LAYER MULTI-DENSITY EPS LINER Provides enhanced impact absorption by utilizing varying densities of foam Allows cooling air to travel unrestricted through tunnels created in the EPS Precise placement of multi-density EPS material yields a more compact, lightweight design EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.) Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck COMFORT The RF-1400 is equipped with a fully removable, washable, adjustable, and replaceable 3D Max-Dry Interior System II that is capable of dissipating sweat 2x faster than traditional nylon interiors. Newly designed cheek pads feature more volume on the bottom for greater comfort and reduced wind noise, and the soft yet durable lower cheek pad fabric provides an extremely plush fit and feel. Fully removable, washable, replaceable and adjustable Exclusive Max-Dry material absorbs and dissipates sweat 2X faster than traditional nylon interiors Soft yet durable lower cheek pad fabric for a plush fit and feel Three-dimensionally shaped to match the contours of a rider’s head Multi-layer cheek pads for improved comfort and helmet stabilization Cheek pads feature more volume for greater comfort and reduced wind noise Optional interior components available in different sizes for a customizable fit Cheek pad channel for eyeglasses HELMET SIZE CHART SIZE HAT SIZE CM INCHES X-Small 6 5/8 - 6 3/4 53-54 20 7/8 - 21 1/4 Small 6 7/8 - 7 55-56 21 5/8 - 22 Medium 7 1/8 - 7 1/4 57-58 22 1/2 - 22 7/8 Large 7 3/8 - 7 1/2 59-60 23 1/4 - 23 5/8 X-Large 7 5/8 - 7 3/4 61-62 24 - 24 3/8 2X-Large 7 7/8 - 8 63-64 24 3/4 - 25 1/8 3X-Large 8 1/8 - 8 1/4 65-66 25 5/8 - 26 HOW TO MEASURE YOUR HEAD SIZE To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead). Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets. THE PERFECT FIT No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death. To determine the proper helmet fit and learn how to safely secure your chinstrap retention system, we recommend viewing SHOEI's "Helmet Fit" video below, or consult with an authorized SHOEI dealer today. Proper fit is important not only for comfort, but for safety, as well.

Read more less

The Shoei Neotec II is a proven premium modular touring helmet that combines flip up convenience with a stable aerodynamic shell, integrated sun protection, adaptable ventilation, and a removable comfort liner. It is designed for commuting and long distance riders who regularly move between highway travel, fuel stops, and face to face conversations. Modular convenience A large glove friendly release opens the chin bar smoothly, while a secure metal locking system provides positive engagement when closed. The chin bar and shell were engineered as a complete system for controlled operation and balanced weight. Advanced shell construction Advanced Integrated Matrix shell combines fiberglass and organic fibers Multi density EPS liner manages impact energy across different zones Aerodynamic shell shape was refined in Shoei’s wind tunnel DOT approved for street use Highway stability and wind management An integrated rear spoiler, lower Aero Deflector, and carefully placed Vortex Generator shapes help control lift and turbulence. Noise Isolator cheek pads improve the seal around the neck area and help reduce unwanted air entering from below. Riding position, motorcycle windscreen, and individual fit will still affect perceived sound. Adjustable ventilation A lower intake directs air toward the shield area. The three position upper intake feeds cooling air through channels in the EPS liner, while rear exhaust outlets release heat and humidity. CNS 3 shield and internal sun visor Broad shield provides a generous field of view Tool free shield system simplifies removal and cleaning Pinlock ready design accepts the compatible anti fog insert Built in sun visor deploys with an external slider Sun visor storage is designed to preserve EPS thickness Touring comfort The three dimensional interior is fully removable and washable. Replaceable cheek pads and center pads allow fit tuning and help extend service life. A stainless steel micro ratchet closure provides quick and repeatable adjustment. Communication integration The Neotec II was designed for clean installation of compatible Sena SRL and SRL2 communication systems. The purpose built mounting areas keep the system close to the shell and avoid a bulky universal clamp. Approximate weight: 4.09 pounds in size Medium. Actual weight varies by shell and size.

Read more less

Features: Roll-off resistant shell design Two-stage built-in drop-down sun shield Ported flow through ventilation Kinetic Polymer Alloy (KPA) shell uses nanotechnology to blend aramid fibers and high-end polymers to better manage energy Meets or exceeds DOT FMVSS 218 certification 2 year warranty COMFORT Technologically advanced half shell with roll­off resistant design. The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool VISOR Built­in, two-stage drop-down sun shield is scratch and UV resis­tant. Removable peak SECURITY DOT-approved quick release chin strap for secure closure. State ­of­ the ­art multi-density EPS VENTILATION Fully adjustable, multi­port, dynamic, flow­through ventilation with ported EPS to keep you cool HELMET SIZING Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional. Size Centimeters Inches X-Small 53-54 cm 20 7/8 - 21 1/4 Small 55-56 cm 21 5/8 - 22 7/8 Medium 57-58 cm 22 1/2 - 22 7/8 Large 59-60 cm 23 1/4 - 23 5/8 X-Large 61-62 cm 24 - 24 3/8 2X-Large 63-64 cm 24 3/4 - 25 1/4 3X-Large 64-65 cm 25 5/8 - 26 4X-Large 66-67 cm 26 3/8 - 26 3/4 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Creators of the original bad-ass Covert Motorcycle Helmet have now developed a full-face version, the Covert FX! The Covert FX displays the same edgy style and function that is expected from the ScorpionEXO Covert Series. However stylish the details may be, they have important function. Each helmet is carefully hand crafted using the latest Fiberglass, Aramid and Polyresin fibers which provide superior strength and extreme light weight. The low-profile shell has been aerodynamically tuned for motorcycle riding, minimizing both lift and turbulence for a smoother, quieter, and more stable ride. Integrated speaker pockets make it easy to install your favorite Bluetooth® communication device, while the KwikWick III comfort liner features a moisture wicking material that will keep you cool, dry and comfortable during your ride. ScorpionEXO continues to set the standard when it comes to value in a motorcycle helmet by including a Free Dark Smoke Shield, as well as a Clear shield, right out of the box. If you’re looking for a stylish and functional motorcycle helmet that’s perfect for both city commutes and long-distance touring, look no further than the Covert FX. ShellExtremely lightweight TCT-Ultra™ Composite shell provides superior strength and impact dispersal properties CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride Advanced multi-layer EPS provides superior energy absorption 2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam ScorpionEXO’s face shield ratchet systemPulls the shield securely against the eye port, ensuring a proper seal EverClear® face shieldOffers state-of-the-art fog-free technology and 95% UV-A and UV-B protection Optically superior face shieldfeatures a shatter resistant, Anti-Scratch hardened coating FREE Additional Dark Smoke Everclear® fog-free face shield included.(Pinlock® face shields sold separately) Tool-less face shield removal system

Read more less

SHELL Meets or exceeds DOT FMVSS 218 and ECE 22.06. 1470 g +/- 50 g. Sizes XS-3XL. Made from 9K Carbon Fiber, Chin Bar 9K Carbon. 2 shells. ECE “P” and “J” certified as both an open and full face helmet. Pinlock Insert included at no extra charge. Intermediate Oval. COMFORT Our best 180 degree modular system for easy on and off. Removable washable, technical fabric liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots. VISOR “A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Quick release, quick change mechanism. Pinlock Max ready shield, includes Pinlock insert. Built-in sun shield. SECURITY DOT approved Micrometric quick release chin strap for a secure closure. State of the art multi-density EPS. Emergency Release Cheek Pad System. VENTILATION Fully adjustable, multi-port dynamic, flow through ventilation with channeled EPS to keep you cool. 5 YEAR WARRANTY Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The C10 is an all-new competitively priced full-face helmet for riders of all ages who value quality and safety, offering a lightweight superior fit thanks in part to its Advanced Polycarbonate Composite shell that was designed using advanced CAD technology. Combined with a wide-view optically-superior face shield and its improved “ACS” Advanced Channeling Ventilation system that allows full front-to-back airflow to flush heat and humidity up and out, the C10 provides a safe and comfortable ride no matter the conditions. With sizes ranging from 3XS to 2XL, the C10 delivers the same great protection for both youth and adult riders alike. *Smoke Shield is not included.POLYCARBONATE SHELLThe Advanced Polycarbonate Shell is designed to be lightweight with a superior fit and comfort, using CAD technology. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Centric urban-touring helmet blends elegant design with sporty functionality, making it ideal for modern commuters and urban adventurers alike. Crafted from our proprietary KPA (Kinetic Polymer Alloy), it delivers a lightweight yet robust shell that offers outstanding protection and performance at exceptional value. Whether you're weaving through city traffic or setting out on longer journeys, the Centric delivers the perfect balance of practicality, comfort, and sport-inspired design. The LS2 CENTRIC includes a Pinlock 70 MaxVision insert at no extra charge. The CENTRIC also unique as there are three different pre-packaged shield options available: Dark Smoke: This version comes with an additional dark smoke shield—perfect for sunny rides while enhancing your style with a sleek, aggressive edge.

Read more less

The Centric urban-touring helmet blends elegant design with sporty functionality, making it ideal for modern commuters and urban adventurers alike. Crafted from our proprietary KPA (Kinetic Polymer Alloy), it delivers a lightweight yet robust shell that offers outstanding protection and performance at exceptional value. Whether you're weaving through city traffic or setting out on longer journeys, the Centric delivers the perfect balance of practicality, comfort, and sport-inspired design. The LS2 CENTRIC includes a Pinlock 70 MaxVision insert at no extra charge. The CENTRIC also unique as there are three different pre-packaged shield options available: Silver Iridium: This version includes a silver iridium shield in the box, adding a reflective, high-tech finish for riders who want a premium look while reducing glare in intense light.

Read more less

The EXO-T520 features a lightweight, low-profile that's perfect for both city commutes and long-distance touring. The aggressive, aerodynamic shape and unique AirFit inflation system combines to reduce drag and lift, while the EXO-T520’s dual homologated Advanced Polycarbonate shell and Multi-Density EPS provide the energy displacement and protection you need. The EXO-T520’s Anti-Fog coated Everclear outer face shield provides shatter and scratch resistance while, internally, the integrated SpeedView Sun Visor will help block the sun when you need it. 6 adjustable intake vents and integrated rear exhaust vents align perfectly with internal channels, keeping you cool when temperatures rise, and warm when temperatures drop. The EXO-T520 was also specifically designed to integrate with the new EXO-COM BlueTooth Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market. Features: Advanced Polycarbonate shell Dual Density EPS Aero-Tuned ventilation Dual position mouth vent Ellip-Tec II ratchet system Everclear no-fog faceshield Breath deflector AirFit inflation system Everclear SpeedView drop down sun-visor KwikWick 'C' comfort liner KwikFit cheek pads EXO-COM ready Communication system speaker pockets Emergency release system Aero skirt DOT and ECE

Read more less

The Creators of the original bad-ass Covert Motorcycle Helmet has now developed a full-face version, the Covert FX Carbon!The Covert FX displays the same edgy style and function that is expected from the ScorpionEXO Covert Series. However stylish the details may be, they have important function. Each helmet is carefully hand crafted using the latest 3K Carbon Fiber which provide superior strength and extreme light weight. The low-profile shell has been aerodynamically tuned for motorcycle riding, minimizing both lift and turbulence for a smoother, quieter, and more stable ride. SHELL: SHELL Extremely lightweight TCT-U™ 3K Carbon Fiber shell provides superior strength and impact dispersal properties CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride Advanced multi-layer EPS provides superior energy absorption Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification COMFORT: Aero-tuned ventilation system features closeable intake vents on top help force cool air in, while exhaust vents maximize movement of hot air out of the helmet Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside) Strategically placed channels throughout the EPS foam provide increased airflow KwikWick® III Comfort Liner features a moisture wicking fabric that keeps you cool and dry in warm weather, and warm in cool weather. Liner Kit is easily removable and washable. Optional Cheek Pads sold separately KwikFit® 3D sculpted cheek pads accommodate most eyeglasses VISION: ScorpionEXO’s face shield ratchet system pulls the shield securely against the eye port, ensuring a proper seal EverClear® face shield offers state-of-the-art fog-free technology and 95% UV-A and UV-B protection Optically superior face shield features a shatter resistant, Anti-Scratch hardened coating FREE Additional Dark Smoke Everclear® fog-free face shield included. (Pinlock® face shields sold separately) Tool-less face shield removal system Comm-Ready speaker pockets allow for easily installation of your favorite Bluetooth® communication system speakers Optional Thinner and Thicker cheek pads available to help optimize fit (sold separately) Reflective material incorporated into the cheek pads for increased night time visibility Included solid neoprene aero skirt (chin curtain) helps reduce wind noise ADDITIONAL SPECIFICATIONSWeight: ± 1,348 grams / 2.9 lbs. (size medium) Speaker pocket size: Height 50mm x Width 50mm x Depth 7.5mm 2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam DOT FMVSS No. 218 Certified/ ECE 22.06 Certified 5 Year Warranty

Read more less