Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Description
Obenauf's Cleanit natural leather cleaner (Dimensions LxWxH: 3.5x3.5x9.5 inches ) is a non-detergent soap created from linseed oil using a traditional saponification process. This liquid natural oil soap lifts and suspends dirt into solution to be rinsed or wiped away. A very effective Ready-to-Use cleaning fluid with a handy trigger sprayer, you can safely re-apply Cleanit as often as needed.
Free of the harmful chemicals often found in other cleaners, Cleanit ingredients contains water, saponified linseed oil, fragrance and has no phosphates, detergents and Sulfates.
Cleaning Boots and Footwear
Work boots will last longer with regular removal of grit, grime, salts and chemicals from on the job. If left on until dry, mud will draw the oils out of your work boots faster, resulting in stiff, brittle leather.
Cleaning Furniture, Saddles & Tack
Use our natural leather cleaner, Cleanit, as the first step in preserving your leather furniture. Furniture, horse saddles and tack will brighten from a quality cleaning with Cleanit. Saddles and tack may require a firm hand scrubbing with a sponge soaked in Cleanit, to remove built-up grime and perspiration from your horse. Alternatively, we recommend a gentle cleaning method on furniture, to remove dirt without scrubbing.
After Cleaning, Restore Lost Oils
After cleaning leather, restore lost oils with Obenauf's Leather Oil or Heavy Duty LP. Our LP will keep your leather moisturized while providing protection from water, dirt and chemicals in between cleanings.
Excellent for cleaning the smooth surfaces of:
Footwear
Furniture
Saddles & Tack
Car & Boat Seats
Motorcycle's & Accessories and much more!
Application
1. Remove dirt & dust with a soft bristled brush
2. After spraying cleaner on, allow to sit for a minute to release dirt
3.No scrubbing required but a soft bristled brush can help lift stubborn spots
4. Rinse or wipe off cleaner & dirt with a clean cloth
5. If cleaning boots, remove laces and clean them with Cleanit
6. Hang boots upside down without laces until fully dry
7. Once leather has dried, replenish leather with Heavy Duty LP or Leather Oil
NOT RECOMMENDED FOR: suede, aluminum, brass, bronze, copper, lead, tin, or zinc
Caution: EYE IRRITANT. Avoid contact with eyes. Wash hands after handling. Keep out of reach of children. If in eyes, rinse for several minutes. Remove contact lenses if present and continue rinsing. If swallowed, rinse mouth with water. Do not induce vomiting.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Description
Give Respect Embroidered Patch with heat sealed backing. Perfect for leather jackets and leather vests.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Hand Grenade 4" Embroidered patch with Heat-sealed backing for easy iron-on application.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Headband Made of 100% polyester. ONE SIZE fits most. Band measures 34 inches long 3 inches wide sweat cloth lined. Thick soft and comfortable material. Hand wash only.
Headband Made of 100% polyester. ONE SIZE fits most. Band measures 34 inches long 3 inches wide sweat cloth lined. Thick soft and comfort material. Hand wash only.
Description
Leathers I'm A Ray of Sunshine Embroidered 4" x 2" Patch A 4"W x 2"H embroidered patch that reads: "I'm A Ray Of Sunshine" in white lettering on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original Leathers artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your Leathers gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Description
Lexol -pH deep cleans with a powerful foaming action. It is concentrated to get embedded dirt and grime out of hard to reach crevices and tooling. Rinses easily, leaving leather healthy, supple, and able to breathe. Being balanced to the same pH as leather Lexol helps to prolong its life.
Leather goods can be an expensive investment, but will look their best and last longer if protected with proper care.
Leather gets dirty! All leather-automobile interiors, footwear, sports equipment, handbags—is constantly exposed to dirt, sunlight, heat and humidity. Leather goods can be an expensive investment, but will look their best and last longer if protected with proper care.
LEXOL pH-balanced Leather Cleaner is purely a cleaner. There are NO silicones, alcohols, waxes, oils, or additives in our product that would interfere with its cleaning action or cause dirt to be trapped in the leather.
Description
Lexol provides vital lubrication to keep leather soft while maintaining its strength, durability and beauty. Microscopically fine oil droplets penetrate to combine with the fibers and stay there. This controlled lubrication lets lexol nourish and revitalize leather while avoiding seepage into adjacent materials. Lexol renews the rich luster of leather, assuring a smooth, satin finish while restoring the supple, comfortable feel. What's more, it gives immediate protection to wet or dry leather-without ever leaving an oily residue.
Lexol Leather Conditioner has a liquid base which allows the product to penetrate the surface into leather pores, for deep conditioning that helps prevent cracking and premature aging.
Lexol Leather Conditioner leaves no greasy residue and it contains no silicon ingredients which dry out leather over time. Lexol Leather Conditioner results in supple, strong, and beautiful leather.
Features:
Ideal for use on: leather auto upholstery, footwear, furniture, handbags & briefcases, sports equipment and luggage
Protects leather against cracking and premature aging
* Conditions and protects light colored leather without darkening.* Mixes freely with water making the product equally useful on wet or dry leather* Nourishes the collagen and elastin proteins of the leather fibers* Not intended for suede or other rough-finished leathers
Made from breathable, moisture wicking polyester, the ZANheadgear Motley Tube is comfortable to wear in both warm and cold climates. Also the versatility of the Motley Tube allows it to be worn 6 different ways; a beanie, ear warmer, desert scarf, face mask, neck warmer, or balaclava. Black Paisley design. Material: 100% Polyester
Motley Tube™ is versatile and durable in both warm and cold climates. It's lightweight, doesn't have any irritating seams and stores easily for your convenience. Wear it as a balaclava, face mask, neck warmer, desert scarf, beanie or ear warmer. 100% Polyester and One size fits most
Made from breathable, moisture wicking polyester, the ZANheadgear Motley Tube is comfortable to wear in both warm and cold climates. Also the versatility of the Motley Tube allows it to be worn 6 different ways; a beanie, ear warmer, desert scarf, face mask, neck warmer, or balaclava. Wavy American Flag design. Material: 100% Polyester
Description
"These Are My Church Clothes" is embroidered in white lettering onto a black background with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Description
This embroidered patch reads "Never Ride Faster Than Your Angel Can Fly" in white lettering on a black background with white trim and has heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Sparkling Earth Products' skull caps are of the highest quality, 100% cotton, and made in the USA. Bike, pedal, run, or hide your bad hair day and look good doing it.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
