Description
"Queen of the Universe" embroidered in fancy pink lettering on a black background with pink trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
* Made in the U.S.A. of soft polyester micro fiber, the Hedz is a seamless tube. It is the most incredibly versatile piece of gear you can get for fishing. The micro fiber fabric wicks the moisture away from your skin to keep you warmer in cold weather and drier in the summer.* It stretches in width, to fit everyone, which makes it a great gift.* You will use it as a scarf to seal your collar, a mask to protect your face against a chilly draft or bugs, a hat liner (with no seam to create painful pressure points on your head), a balaclava, a ponytail holder and a headband, and a couple of hats to cover your hair, including the stylish "pirate look" and a do-rag.* Dim: 18” long x 10”wide (20” around)* Directions for use are printed on the packaging.
Carry your cardkey or keys in style with this ROD lanyard. The snap buckle release makes it easy to use your keys, badge, or whatever else you are carrying. Made of soft 100% polyester with a metal logo medallion. The lanyard is about 1" wide, 20" long from the top of the loop to the top of the buckle, and 22" long to the bottom of the J-hook. A great way to carry your keys or ID.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Route 66 DesignEco-Friendly Reusable Bag!Dimensions: 16.5" x 20"Lightweight Polyester FabricFOLD IT - Pull Out Inner PouchROLL IT - Fold Sides Towards CenterSTUFF IT - Roll & Tuck Into Inner Pouch
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Description
Wickablilty and Breathability sets Schampa's Poly/Cotton/Lycra HeadRag apart from the rest. Form fitted for an initial secure fit with adjustment tails for an enhanced fit. Extremely comfortable, a must for spring, summer, and fall.
Features:
The Original SCHAMPA Stretch Headwrap
Designed Riders, Athletes, but used by Hospitals, Restaurants, and Cancer Patients
Soft, Comfortable, Form Fitted
SCHAMPA Z-Wraps were designed out of the need for a truly perfect headwrap
Comes in Solids, Prints and our Breathable Mesh
One Size Fits Most
Works with Most Helmets, best with 1/2 helmets, Snow Helmets, Beanie Style Helmets or worn alone
Description
Wickablilty and Breathability sets Schampa's Poly/Cotton/Lycra HeadRag apart from the rest. Form fitted for an initial secure fit with adjustment tails for an enhanced fit. Extremely comfortable, a must for spring, summer, and fall.
Features:
The Original SCHAMPA Stretch Headwrap
Designed Riders, Athletes, but used by Hospitals, Restaurants, and Cancer Patients
Soft, Comfortable, Form Fitted
SCHAMPA Z-Wraps were designed out of the need for a truly perfect headwrap
Comes in Solids, Prints and our Breathable Mesh
One Size Fits Most
Works with Most Helmets, best with 1/2 helmets, Snow Helmets, Beanie Style Helmets or worn alone
Description
Officially licensed Sturgis Motorcycle Rally 75th Anniversary merchandise.
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
