* Made in the U.S.A. of soft polyester micro fiber, the Hedz is a seamless tube. It is the most incredibly versatile piece of gear you can get for fishing. The micro fiber fabric wicks the moisture away from your skin to keep you warmer in cold weather and drier in the summer.* It stretches in width, to fit everyone, which makes it a great gift.* You will use it as a scarf to seal your collar, a mask to protect your face against a chilly draft or bugs, a hat liner (with no seam to create painful pressure points on your head), a balaclava, a ponytail holder and a headband, and a couple of hats to cover your hair, including the stylish "pirate look" and a do-rag.* Dim: 18” long x 10”wide (20” around)* Directions for use are printed on the packaging.
Description
A beautiful original design of a Sugar Woman looking seductively at the viewer with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Schampa's Z-Wraps are known worldwide as the most comfortable headwrap available. Made of wickable and breathable fabric, Z-Wraps are a must under the helmet, during workouts, and while out in the sun.
Features:
The Original SCHAMPA Stretch Headwrap
Designed Riders, Athletes, but used by Hospitals, Restaurants, and Cancer Patients
Soft, Comfortable, Form Fitted
SCHAMPA Z-Wraps were designed out of the need for a truly perfect headwrap
Comes in Solids, Prints and our Breathable Mesh
One Size Fits Most
Works with Most Helmets, best with 1/2 helmets, Snow Helmets, Beanie Style Helmets or worn alone
Description
Wickablilty and Breathability sets Schampa's Poly/Cotton/Lycra HeadRag apart from the rest. Form fitted for an initial secure fit with adjustment tails for an enhanced fit. Extremely comfortable, a must for spring, summer, and fall.
Features:
The Original SCHAMPA Stretch Headwrap
Designed Riders, Athletes, but used by Hospitals, Restaurants, and Cancer Patients
Soft, Comfortable, Form Fitted
SCHAMPA Z-Wraps were designed out of the need for a truly perfect headwrap
Comes in Solids, Prints and our Breathable Mesh
One Size Fits Most
Works with Most Helmets, best with 1/2 helmets, Snow Helmets, Beanie Style Helmets or worn alone
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Permanent Water-Guard is an effective and durable water based water repellent. Safe for all washable fabrics as well as Down and all Insulations. Resists water borne and oil borne stains. Also leaves fabric soft and quiet. Is non flammable, no solvents and no VOC's. Aerosol spray formula optimized for synthetic fibers.
Description
Apply STRETCH-IT generously to shoe area that needs stretching. Allow to. If mechanical stretcher is not available, apply STRETCH-IT to shoe on foot. Then wear until firmly set in expanded shape.
Description
Sgt. At Arms embroidered patch in black and white has heat sealed backing for easy iron-on application.
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
DGAngels Travel Makeup Bag - High Quality Sublimation Print. An image on the top and several different images around the sides. Custom DGAngels inner lining. A handy carry strap across the top. DGAngels Custom Zipper Pulls. This Travel Makeup Bag measures 7.5"L x 5"W x 4"H
Made in USA: often held to higher product quality standards.Sweat Band: made of super absorbent terry cloth to prevent sweat stains and keep the sweat out of your eyes.One Size: fits the majority of people.Ties in Back: for security, fit, and adjustment.
Everyone loves their boots but hates to struggle with tucking in their pants inside the boot. The pants start to look bunchy, but with our boot clips you will be able to avoid all that, just clip and ride.
Description
All pins are proudly Made In the USA from the best pewter & are always lead free. Customize your Favorite Jacket, Vest, Armored Flannel or Denim Vest with one our great Pin designs. Don't forget to check out our other Patches for hundreds of designs!
Features:
Pewter Biker Pin
Hand carved
Lead free
'-Premium Cowhide: leather stretches to your head.-One Size: fits most people.-Perforated Top Panel: allows airflow and cooliing. -Leather Straps: tie in the back for a snug fit.
Description
Made in the U.S.A. of soft polyester micro fiber, the Hedz is a seamless tube. It is the most incredibly versatile piece of gear you can get for fishing. The micro fiber fabric wicks the moisture away from your skin to keep you warmer in cold weather and drier in the summer. It stretches in width, to fit everyone, which makes it a great gift.
You will use it as a scarf to seal your collar, a mask to protect your face against a chilly draft or bugs, a hat liner (with no seam to create painful pressure points on your head), a balaclava, a ponytail holder and a headband, and a couple of hats to cover your hair, including the stylish "pirate look" and a do-rag.
Features:
Dimension: 18" long x 10" wide (20" around)
Directions for use are printed on the packaging
Description
"It's All About The Journey" in orange and white lettering on a black background with orange trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you'll find a favorite amongst our many designs!
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
For leather, fabric or oilskin - Environmentally safe and odorless! Protect your hiking boots, gym shoes, work clothing, jackets, hat, gloves, suede, tents and back packs with this environmentally safe and odorless spray-on water shield! This spray has more silicone than other sprays and will not harm GOR-TEX. No harmful chemicals and will not harm glues or stitching.
Water Shield Extended Waterproofing
High Silicone Content
Easy Application
Durable and Long Lasting
Odorless (will not spook game)
Will not harm glues or stitching
Obenauf's Water Shield is Made in the USA
Water Shield Bottle Sizes
Obenauf's Water Shield is available in two sizes. The 8 ounce bottle comes with a finger pump sprayer providing a fine mist and is about the correct size to spray suede and fabric footwear. Make sure you spray your clean, dry, fabric boot laces as well. This will protect your laces from absorbing moisture and rotting. The 16 ounce bottle comes with a trigger sprayer convenient for waterproofing larger items like horse blankets, tents, etc. For silicone waterproofing spray application tips, click the Application tab.
Odorless Silicone Waterproofing Spray
Providing extended water protection to fabrics, canvas, nylon, suede, and chrome-tanned leather. We use pump sprayer applicators which allow a higher silicone content resulting in a more concentrated formula than aerosol dispensers. This creates a more durable and long lasting water protection. Equestrians have found Water Shield to be an excellent waterproofing spray for horse blankets. In addition, our silicone waterproofing spray is great for marine fabrics, such as soft tops and covers. Discover the many benefits of using silicone waterproofing for yourself!
Obenauf's® Water Shield spray is unscented, while still providing long lasting waterproofing. What are the benefits of an odorless waterproofing product? First, those who are sensitive to scents. Second, some horses may be spooked by a smelly waterproofing spray applied to their horse blanket. Third, Obenauf's® Water Shield is also conveniently odorless for hunting and camping gear, so as not to spook game. Here are three reasons why our silicone waterproofing spray is odorless: a non-aerosol dispenser means no smelly propellants are needed, no scent has been added, and the silicone itself is odorless.
Recommended Uses For Silicone Waterproofing Spray:
Clothing & Hats
Gloves
Footwear
Tents & Backpacks
Horse Blankets
Boat Covers
Obenauf's® Water Shield On Smooth Leather?
In regards to waterproofing leather, the preferred use of Obenauf's® silicone waterproofing would be on chrome-tanned leather boots. Some Chrome leather doesn't require an oil preservative at all. If you aren't sure if your boots are chrome leather, ask the manufacturer.
Water Shield can be used to enhance waterproofing on other smooth leather boots, but we recommend our waterproofing spray be used on them only as an overcoat after leather preservative has been applied. This is because silicone waterproofing is a surfactant and does not have any conditioning ingredients required to restore or preserve full-grain leather.
Technical Specs
SKU: 1503
UPC: 610372150304
FLUID OUNCES: 8
GROSS WEIGHT: 9 ounces
DIMENSIONS LxWxH: 2 x 2 x 7 3/4
Application
APPLYING OBENAUF'S SILICONE WATERPROOFING SPRAY
Apply silicone waterproofing in an open, well ventilated area with a fine mist sprayer, approximately 6 inches away in a crisscross pattern to coat evenly, not heavily. Allow 1 hour to cure between applications. Multiple applications increase waterproofing and will last longer. The amount required will depend on the type of fabric, whether natural or synthetic. We recommend up to 4 applications for improved coverage on fabric and a 24 hour waiting period after final application to achieve full water protection. Silicone waterproofing may not adhere to some fabrics. Test in a hidden area if color change is a concern.
WATERPROOFING SPRAY STORAGE RECOMMENDATIONS
To prevent freezing, store above 5 degrees Celsius. In case of freezing, thaw at room temperature before use and shake to reconstitute. Shake well before each use. To avoid clogging, rinse sprayer nozzle with hot water after use. Unscrew nozzle from bottle, place in a cup of water, pump water through sprayer until the spray is clear. Remove from cup, pump out remaining water, replace nozzle back onto bottle.
Description
For leather, fabric or oilskin - Environmentally safe and odorless! Protect your hiking boots, gym shoes, work clothing, jackets, hat, gloves, suede, tents and back packs with this environmentally safe and odorless spray-on water shield! This spray has more silicone than other sprays and will not harm GOR-TEX. No harmful chemicals and will not harm glues or stitching.
Water Shield Extended Waterproofing
High Silicone Content
Easy Application
Durable and Long Lasting
Odorless (will not spook game)
Will not harm glues or stitching
Obenauf's Water Shield is Made in the USA
Water Shield Bottle Sizes
Obenauf's Water Shield is available in two sizes. The 8 ounce bottle comes with a finger pump sprayer providing a fine mist and is about the correct size to spray suede and fabric footwear. Make sure you spray your clean, dry, fabric boot laces as well. This will protect your laces from absorbing moisture and rotting. The 16 ounce bottle comes with a trigger sprayer convenient for waterproofing larger items like horse blankets, tents, etc. For silicone waterproofing spray application tips, click the Application tab.
Odorless Silicone Waterproofing Spray
Providing extended water protection to fabrics, canvas, nylon, suede, and chrome-tanned leather. We use pump sprayer applicators which allow a higher silicone content resulting in a more concentrated formula than aerosol dispensers. This creates a more durable and long lasting water protection. Equestrians have found Water Shield to be an excellent waterproofing spray for horse blankets. In addition, our silicone waterproofing spray is great for marine fabrics, such as soft tops and covers. Discover the many benefits of using silicone waterproofing for yourself!
Obenauf's® Water Shield spray is unscented, while still providing long lasting waterproofing. What are the benefits of an odorless waterproofing product? First, those who are sensitive to scents. Second, some horses may be spooked by a smelly waterproofing spray applied to their horse blanket. Third, Obenauf's® Water Shield is also conveniently odorless for hunting and camping gear, so as not to spook game. Here are three reasons why our silicone waterproofing spray is odorless: a non-aerosol dispenser means no smelly propellants are needed, no scent has been added, and the silicone itself is odorless.
Recommended Uses For Silicone Waterproofing Spray:
Clothing & Hats
Gloves
Footwear
Tents & Backpacks
Horse Blankets
Boat Covers
Obenauf's® Water Shield On Smooth Leather?
In regards to waterproofing leather, the preferred use of Obenauf's® silicone waterproofing would be on chrome-tanned leather boots. Some Chrome leather doesn't require an oil preservative at all. If you aren't sure if your boots are chrome leather, ask the manufacturer.
Water Shield can be used to enhance waterproofing on other smooth leather boots, but we recommend our waterproofing spray be used on them only as an overcoat after leather preservative has been applied. This is because silicone waterproofing is a surfactant and does not have any conditioning ingredients required to restore or preserve full-grain leather.
Technical Specs
SKU: 1604
UPC: 610372160402
FLUID OUNCES: 16
GROSS WEIGHT: 1 lb. 2 ounces
DIMENSIONS LxWxH: 2 3/4 x 4 x 9 1/2
Application
APPLYING OBENAUF'S SILICONE WATERPROOFING SPRAY
Apply silicone waterproofing in an open, well ventilated area with a fine mist sprayer, approximately 6 inches away in a crisscross pattern to coat evenly, not heavily. Allow 1 hour to cure between applications. Multiple applications increase waterproofing and will last longer. The amount required will depend on the type of fabric, whether natural or synthetic. We recommend up to 4 applications for improved coverage on fabric and a 24 hour waiting period after final application to achieve full water protection. Silicone waterproofing may not adhere to some fabrics. Test in a hidden area if color change is a concern.
WATERPROOFING SPRAY STORAGE RECOMMENDATIONS
To prevent freezing, store above 5 degrees Celsius. In case of freezing, thaw at room temperature before use and shake to reconstitute. Shake well before each use. To avoid clogging, rinse sprayer nozzle with hot water after use. Unscrew nozzle from bottle, place in a cup of water, pump water through sprayer until the spray is clear. Remove from cup, pump out remaining water, replace nozzle back onto bottle.
Features:
Industrial Strength Leather Preservative
Provides Industrial Strength Protection to Work Boots
Made With Obenauf's Unique Beeswax/Propolis Suspension Formula
Beeswax Cream Melts When Applied By Hand & Buffs to a Shine
Originally Developed For Wild-land Firefighters Boots
Heavy Duty LP (Industrial Strength Leather Preservative) is Proudly Made in Idaho
What Is Heavy Duty LP?
An industrial strength leather preservative paste best used for conditioning full grain leather, top grain, and nubuck. Made with natural oils, beeswax, and propolis to create a smooth cream/paste that melts when applied by hand. The beeswax, in our leather preservative, provides a protective barrier on the outside, while the natural oils are absorbed into the leather. A true leather preservative and conditioner, Heavy Duty LP restores lost oils, provides protection from moisture and dirt while still allowing leather to breathe.
Benefits of using Heavy Duty LP:
Is odorless after applied (very important for hunters)
Restores sun-faded leather
Resists scuffing and dry rot
Applies easily with a clean cloth
Penetrates deeply into leather
Can be buffed to shine or polished over
Contains no harmful silicones, petroleums, solvents, or neatsfoot
Is approved for Gore-Tex footwear
A Leather Preservative Paste Designed to Protect Work Boots
Our Heavy Duty LP provides industrial strength protection to keep work boots looking like new as long as possible. Applying leather preservative on a regular basis can double the life of most leather work boots used in extreme conditions such as, welding, farming, hunting, hiking, biking, horseback riding, inside factories, and outdoor workers like, lineman, trail builders, firefighters, ranchers, etc.
Don't need to preserve leather boots? Heavy Duty LP resists water, preserves, restores, and conditions leather shoes, belts, holsters, sheathes, saddle bags, tool pouches, and athletic gear. Not just a leather preservative, apply Heavy Duty to clean, warm, cotton oilskin dusters and hats to re-waterproof.
Leather Preservative Originally Developed for Wild-land Firefighters
Originally developed for severe working conditions of Wild-land Firefighters to preserve leather boots and provide heavy duty protection, naturally! Wild-land Firefighters boots are subjected to heat, steam, wet ashes, and fire retardants. If left untreated (without leather preservative), these conditions can ruin expensive boots faster. Obenauf's® Heavy Duty leather preservative paste provides a beeswax barrier to resist heat, chemicals, and moisture while replacing lost oils.
For tips on applying leather preservative, see the instruction videos below provided by Leather Crafter, Woodlander North.
Technical Specs
SKU: 103
UPC: 610372010301
OUNCES: 8
GROSS WEIGHT: 9 ounces
DIMENSIONS L x W x H: 3 1/4 inches wide, 2 1/2 inches tall
Application
Applying Heavy Duty LP To Work Boots
Test leather preservative in a hidden area if color change is a concern
1 ounce should provide 1 application to tall boots
Apply every 6 to 8 weeks by hand (hand application melts leather preservative aiding in absorption and even coverage)
Apply leather preservative at room temperature to clean, dry boots
Allow 1 hour between treatments and buff off excess
Two applications last much longer in wet conditions
