Description
A vibrant, original design of a Native Eagle with heat sealed backing for easy iron-on application.
Our Native Eagle Patch is a 4" x 4" sized patch featuring a Native American design eagle in red, white, blue and black. Embroidered patch with heat sealed backing. Perfect for leather jackets and leather vests. Get yours today!
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Fire Department MedallionMPN no MD1020 Medallion FireThe Fire Medallion is the third of the six Medallions He gets this Medallion after completing the Once Link defeats and frees all of the within the Fire Temple, the Sage of Fire
Description
"RIDE IT LIKE YOU STOLE IT" is embroidered in orange lettering onto a black background with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
This patch reads "It's Only The "Land Of The Free" Because Of The Brave" in white lettering on a black background with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
I Hear Voices, They Don't Like You" embroidered in white on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Description
"I Hate Everything" embroidered in white lettering on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
"Ride Forever Free, V-Twin Life" inside of a pinstripe shield/flame design with heat sealed backing for easy iron-on application.
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Headband Made of 100% polyester. ONE SIZE fits most. Band measures 34 inches long 3 inches wide sweat cloth lined. Thick soft and comfortable material. Hand wash only.
Description
"What Happens In The Garage... Stays In The Garage" embroidered in white and red on a black background with red trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
The ingenious design of Hair Gloves keeps your ponytail free from knots and tangles, and has a clean look.
Features:
Full Grain Leather Ponytail Holder
Classic Solid Color Leather
Extra Wide Available for Thicker Hair
Hook It, Wrap It, Snap It!
Style No. Black - (4) 10110, (8) 10120, (12) 10130
Style No. Black Extra Wide - (4) 10142, (8) 10141, (12) 10140
Guns Don't Kill People Embroidered 4" 4" x 2" Patch"Guns Don't Kill People, People With Cell Phones Do" in red and white lettering on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Description
The Cross and Roses Patch features a highly detailed cross and roses design and has heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Chosen number one by many boot manufacturers and outdoor enthusiasts, Aquaseal waterproofing paste creme has proven itself reliable to waterproof and condition all types of leather. This unique product combines conditioning oils similar to those used by tanneries, extremely viscous silicone, and a blend of waxy substances. This achieves maximum waterproofing and conditioning, while retaining leather breathability and durability. Aquaseal is easy to use and leaves no sticky residue.
Description
American Flag Reflective Motorcycle Embroidered patch that combines design with reflective material. The white portion of this patch reflects light to keep you visible on the road and anywhere you go. It's a great new twist on some old favorite motorcycle patches. Heat-sealed backing for easy iron-on application.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All Hair Gloves® come in snaps for easy use with elastic band and hook for non-slip security.
Features:
Full Grain Leather Ponytail Holder
Decorated with Chrome Butterflies Concho Medallions
Lace-up Style
Hook It, Wrap It, Snap It!
Features:
Premium Cowhide soft and very versatile
Jean Style Pockets for a casual look
Lined for your comfort
Zip Front for ease when putting it on or taking it off
NOTE: This is a closeout item, only available in a size 2 (26" waist)
Description
The Field Armor™ Stryker vest is at the very heart of the ICON creed. A silhouette that broke with the conventional race derivative dogma and struck out on its own street-specific course. External plastic plating defines the Stryker’s commanding form which has become the de facto uniform of sport bike riders worldwide. Elastic and hook & loop straps help ensure a snug fit over multiple body sizes, while the low-profile form factor fits easily under most jackets. Internally the Field Armor™ Stryker vest is loaded with a custom molded D3O® back insert with custom molded ICON geometry. Join the ranks of riders that swear allegiance to the Stryker.
Features:
EN 1621-2/03AC2006 CE Approved Stryker Back Armor
d3o Breathable back insert, with custom molded icon geometry
Articulating injection molded back armor with air flow channels
Injection molded chest plate with integrated air intakes
Hydra dry moisture wicking liner
Highly adjustable waist and shoulder straps
Low-profile design fits under most jackets
FIT: Icon adjustable fit
MATERIAL: Vented bio foam and air mesh chassis, Injection molded chest plate with integrated air intakes, Articulating injection molded hard back plates with air flow channels
CERTIFICATION: Tested and certified according to standard EN1621-2 : 2014
PROTECTION: Custom molded ICON Stryker™ D3O® back insert
