Sales Helmets

Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection. TECH SPECs Injection-molded ABS outer shell is lightweight and highly resistant to impacts Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face Molded urethane chin bar pad dissipates energy during front impact Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately) Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort Molded EPS ear pockets fit select aftermarket audio accessories US DOT FMVSS No. 218 compliant / ECE R22.06 certified ⚠️ WARNING: This product can expose you to chemicals including Phthalates, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov ⚠️ WARNING: This product can expose you to chemicals including Lead and Cadmium, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov FITMENT Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.

Read more less

Bell Qualifier DLX MIPS Devil May Care 2020 Helmet The Bell Qualifier DLX Helmet comes jam packed with the great features of the Qualifier and also includes the ProTint Photochromatic Face Shield at an impressive price. The RevZilla gear specialists have been rolling through miles and time zones faster than Marquez powers through laps at Sachsenring, which is to say pretty darn fast. Having just returned from Cologne, Germany and Intermot 2014, they have seen the best of what’s new, what’s fun, and what is worth reporting in the ever-expanding moto-verse. From bikes cranking out 300 hp, to the tip of the spear with regards to new helmets, apparel, and motorcycle accessories, they saw it, rocked it, and are back here at RevZilla HQ ready to keep you informed so that you can make the most out of your time on two wheels. One of the hottest items from the International Motorcycle, Scooter, and E-Bike Fair (Intermot) was the Bell Qualifier DLX Helmet. When it was unveiled in Germany it was shown to have several incredibly cool features that were not applicable to previous iterations. Most notably, it was announced that this helmet would come with a free ProTint photochromatic face shield. This is far-out for a helmet of any ilk, much less one that will come at an entry-level price point. Shell: Lightweight polycarbonate shell MIPS Multi-Directional Impact Protection System for dramatically improved rotational impact energy displacement 3 shell sizes SM: XS and SM Helmets MD: MD and LG Helmets LG: XL to 3XL Helmets Aerodynamic profile resists buffeting and lift Shield: ProTint Photochromatic Shield included NutraFog II superior anti-fog, anti-scratch and UV protected shield ClickRelease for the fastest, easiest, tool-free shield changes ever Ventilation: Adjustable ventilation system for cooling and comfort Interior: Moisture-wicking, removable/washable interior Contoured cheek pads Includes chin curtain and breath deflector Integrated speaker pockets Padded wind collar drastically reduces wind and road noise Safety: DOT and ECE certified Padded chin strap with D-ring closure Five year warranty Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Bell Broozer is a compact street helmet built for riders who want two looks and two riding configurations in one design. Run the removable chin bar for full-face coverage, or remove it for an open-face setup. An integrated drop-down shield adds quick eye protection without the bulk of a traditional full-face helmet. Key Features and Benefits Removable chin bar creates versatile full-face and open-face configurations Integrated drop-down shield keeps eye protection close at hand NutraFog II anti-fog, anti-scratch and UV-protected shield treatment Three shell sizes help reduce unnecessary bulk across the size range Eyewear-compatible liner pockets accommodate many prescription glasses and sunglasses Approximate weight: 1,350 g DOT and ECE certified Bell Broozer Size Guide Size Head Circumference Approx. Inches XS 53–54 cm 20 7/8–21 5/8 S 55–56 cm 21 5/8–22 M 57–58 cm 22 1/2–22 3/4 L 59–60 cm 22 3/4–23 1/4 XL 61–62 cm 23 5/8–24 2XL 63–64 cm 24 3/4–25 1/4 Measurements are a starting point; cheek-pad pressure and overall head shape still need to be evaluated. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Description MX-9 ADVENTURE MIPS RSD EXPLORE IN THE DARK Legendary builder and long-time Bell collaborator Roland Sands introduces us to the dark side with this street fighter take on the MX-9 Adventure. Adjustable peak included. With the MX-9 Adventure Mips, pavement is optional. This go-anywhere helmet gives you the best of both dirt and street. It's designed to adapt to your version of adventure. From the roughest singletrack to urban blacktop, the MX-9 Adventure Mips gets you there safely in style. We've taken our MX-9 and added even more capability with an integrated anti-fog, anti-scratch clear faceshield. The shield flips up and leaves enough room for goggles in extreme conditions, or it can be removed completely. Conversely, the adjustable visor can be removed for a stealth street look. Mips protection, Velocity Flow ventilation, and a removable, washable, anti-microbial liner round out a highly adaptable package. Features: 3 Shell and EPS Sizes for a Personalized Fit Industry-Leading Five-Year Warranty Integrated/Removable shield with NutraFog II anti-fog, anti-scratch and UV protection Lightweight Polycarbonate/ABS Shell Construction MIPS-Equipped Padded Chin-Strap with D-Ring Closure Removable/washable anti-bacterial interior Two point adjustable Visor with air intake vents Velocity Flow Ventilation system for maximum cooling Specifications: WEIGHT: 1500 Grams CERTIFICATION: DOT, ECE CORE TECHNOLOGIES MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Description SOA inspired helmet Fits great!!! World's Smallest Lightest DOT polo Helmet here in the United States! All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look. Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference. Features: ALL beanie helmets now come with quick release straps Smallest DOT shell size ever made Inspired by the hit Biker TV Show Meets or exceeds D.O.T. FMVSS No.218 standards Sits low on your head Made of Fiberglass Only use water to clean our helmets Weight: About 1lb / 500g FMVSS 571.218 (DOT) certified Small and lightweight Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit Our strong ABS shell combined with a dense foam Easy exchanges If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size HELMET SIZING CHART SIZE INCHES 2X-Small 20.00"-20.50" X-Small 20.75"-21.25" Small 21.50"-22.00" Medium 22.25"-22.75" Large 23.00"-23.50" X-Large 23.75"-24.25" 2X-Large 24.50"-25.00"

Read more less

Description The Qualifier gives you reliable full-face protection with the sturdy chin bar and loads of padding for a super-secure and comfortable fit. On top of the lightweight and aerodynamic design, it comes with a highly adjustable visor for airflow on your terms. Packed with features gleaned directly from our flagship Star line, the Qualifier delivers exceptional performance at incredible value. In addition to superb fit and comfort, it comes fully decked with aggressive styling, NutraFog II anti-fog, anti-scratch clear face shield, Velocity Flow ventilation, a removable, washable liner, integrated speaker pockets and a padded wind collar. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information. HELMET SIZING CHART SIZE CM IN HAT SIZE (IN) X-Small 54–55 21 1/4–21 5/8 6 3/4–6 7/8 Small 55–56 21 5/8–22 6 7/8–7 Medium 57-58 22 1/2–22 3/4 7 1/8–7 1/4 Large 58–59 22 3/4–23 1/4 7 1/4–7 3/8 X-Large 60–61 23 5/8–24 7 1/2–7 5/8 2X-Large 62–63 24 1/2–24 3/4 7 3/4–7 7/8 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

SS610 HELMETTRI-WEAVE SHELLThe SS610 allows full head protection coverage with wind in your face riding. Put the wind in your face but your head in a helmet with this classic open face DOT Protective Outer Shell helmet. The ultra-slim lid is made from a Tri-Weave Shell and Lightweight Low-Profile In-Molded EPS Foam Liner, and the Anti-Microbial Moisture Wicking Comfort Liner lets you have that old-school look and keep a new-helmet smell. PRODUCT SPECSDOT Protective Outer ShellTri-Weave ShellLow-Profile Lightweight In-Molded EPS Foam Liner3-Snap SHORTY VisorAnti-Microbial Moisture Wicking Comfort LinerSizes: XS, S, M, L, XL, 2XLSIZE CHARTHOW TO MEASURE A PROPER HELMETSIZING:To measure your head size, wrap a tape measure horizontally around your forehead. Select the helmet that is the closest fit to that size. A helmet should fit snug on your head. If it moves while wearing, it is too large. If it is painful to wear, it is too small. For proper sizing, your nearest dealer will be able to help you get sized up.FITTING: Open the chin straps and slide the helmet onto your head starting at the forehead. A helmet should feel snug. If it slides on easily it is too big. It should feel tight to pull down. Make sure the inner padding fits snug all around. You should feel the padding pressing against your cheeks and head. The last check for a proper fit is to test if it moves while wearing, there should be no movement if you shake your head. Place your hands on the helmet and move it front to back and side-to-side. If there is a lot of movement, try a size down.Helmet Size XS SM MD LG XL 2XLHead Measurement 20 7/8" - 21 1/4" 21 5/8" - 22" 22 1/2" - 22 7/8" 23 1/4" - 23 5/8" 24" - 24 3/8" 24 3/4" - 25 1/4"*All measurements done in inches

Read more less

Description PROTINT PHOTOCHROMIC SHIELD Now with a BELL ProTint Shield. Activated by UV light, ProTint shields adapt to changing light conditions, providing enhanced vision during any ride. Offering exceptional clarity in low light conditions, ProTint shields quickly darken when exposed to bright sunlight. This adaptive technology helps your eyes adjust to the conditions, even when they are changing as quickly as the road ahead. Enhance your ride. MAGNEFUSION CHEEK PADS Allows for easy removal of the pads for washing and enables emergency responders to easily remove the cheek pads first before removing the helmet following an impact. 3K CARBON FIBER SHELL The proven 3K carbon fiber gives this helmet the look, performance and feel of a true race helmet. 5 SHELL SIZES 5 shell sizes 6 impact liner sizes allows the rider to experience the performance of a near-custom fit. However you ride, fit matters. FLEX ENERGY MANAGEMENT A first-of-its-kind, three layer impact liner designed to manage energy from three potential impact scenarios: low, mid and high-speed. New fit, 10% lighter, and now equipped with our ProTint shield (U. S. only), the Race Star Flex DLX is the ultimate choice for the racer with a day job - where every race weekend decision counts. Offering all the features and protection of its class-leading sibling, the Race Star utilizes a 3k carbon fiber shell and is packed with cutting-edge technology to deliver premier performance. Our proprietary Flex liner provides comprehensive protection, Magnefusion cheek pads ensure superior comfort with optimal fit, and RaceView orientation affords you a perfect view of the finish line. The desire to win starts in the head. In the U. S. , the Race Star Flex DLX comes with a single Panovision ProTint Photochromic shield. For the rest of the world, the Race Star Flex DLX comes with a Panovision Pinlock Clear shield installed and an additional Panovision Dark Smoke Pinlock with Tear-Off Posts shield in the box. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information. Features: SHIELD TYPE: BELL Protint Photochromic Shield Technology CHEEK PAD: New triple-density cheek pads with added comfort lining WEIGHT: 1540G +/- 50G (SIZE M) ELECTRONICS COMPATIBILITY: Now with speaker pockets CERTIFICATIONS: DOT (US), SNELL (US), ECE (EU) Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Description All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look. Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference. Features: ALL German helmets now come with quick release straps Smallest DOT shell size ever made Inspired by the hit Biker TV Show Meets or exceeds D.O.T. FMVSS No.218 standards Sits low on your head Made of Fiberglass Weight: About 1lb / 500g FMVSS 571.218 (DOT) certified Small and lightweight Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit Our strong ABS shell combined with a dense foam Easy exchanges If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size Sizing: XX-S: 20.00"-20.50" X-S: 20.75"-21.25" S: 21.50"-22.00" M: 22.25"-22.75" L: 23.00"-23.50" X-L: 23.75"-24.25" XX-L: 24.50"-25.00"

Read more less

Description All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look. Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference. Features: ALL German helmets now come with quick release straps Smallest DOT shell size ever made Inspired by the hit Biker TV Show Meets or exceeds D.O.T. FMVSS No.218 standards Sits low on your head Made of Fiberglass Weight: About 1lb / 500g FMVSS 571.218 (DOT) certified Small and lightweight Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit Our strong ABS shell combined with a dense foam Easy exchanges If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size Sizing: XX-S: 20.00"-20.50" X-S: 20.75"-21.25" S: 21.50"-22.00" M: 22.25"-22.75" L: 23.00"-23.50" X-L: 23.75"-24.25" XX-L: 24.50"-25.00"

Read more less

Description FF-98 RELIANCE The FF-98 features GMAX's New quick release face shield mechanism with shield lock and our integrated LED rear light with option to upgrade to our Brake Light Kit. The ECE rating gives you the assurance that this helmet has been certified by the leader in "world standard" safety equipment testing. Features: ECE / DOT Approved SpaSoft interior keeps you dry and comfortable COOLMAX® CORE technology wicks moisture away from your body and dries quickly Charcoal bamboo fiber keeps odor away by eliminating bacterial growth Removable, adjustable and washable SpaSoft interior allows for easy cleaning and custom fitting New tool-less and quick release face shield mechanism Eight intake and exhaust vents Integrated multi-function red LED rear light included (Optional wireless brake light kit available P/N 72-3781) Lightweight Poly Alloy shell Large size is only 3.5lb Drop down sun shield with anti-fog coating UV400 coated shields with 100% UV protection Shield lock Breath deflector and chin curtain included Built in speaker pockets Intercom compatible

Read more less

Features: Injection molded polycarbonate shell Fully removable moisture wicking liner Drop down sun visor D-ring closure system Secure, snug comfortable fit DOT approved Choosing the Correct Helmet SizeHelmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.Head Measurement InstructionsWrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart to the right.Helmet Sizing InformationTo achieve proper helmet fitment, begin by finding your head circumference size using the method described. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheek pads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheek pads can be purchased to obtain the best fit.Note:Sizing information is provided by the manufacturer and does not guarantee a perfect fit. Please use this chart as a guide only.Size Chart

Read more less

Named after our favorite explorer, the ICON Domain Cornelius features a hand-crafted FRP shell for maximum integrity with minimal weight. In addition, a prominent dorsal ridge, large brow-mounted intake vents, and channeled EPS provide increased ventilation within the helmet. This increased ventilation greatly enhances rider comfort when paired with the removable Hydradry liner and removable chin curtain. The Domain Cornelius includes a color-matched OTT Spoiler, a color-matched Domain Shield in Dark Smoke and a fog-free clear Domain Shield. In addition, the Domain is also compatible with ICON's HelmLink Bluetooth communications system, which seamlessly integrates with the helmet (sold separately). WORLD STANDARDMeets DOT FMVSS 218 (US), ECE 22-06 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.SHIELDThe oversized Fog-Free Domain™ shield increases peripheral vision and and produces an unmatched distortion free line of sight. Hot swap with the Domain Motoshield™ for that motocross inspired style.LINERRemovable moisture-Wicking Hydradry™ Red comfort liner for a custom fitSHELLHandmade composite fiberglass FRP shell for strength with minimal weight

Read more less

Inspired by Bell's very first production helmet in 1954, the Custom 500 is newly refined with an oval design and low-profile fit, giving it that smaller look you want with the same throwback style. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Genuine Carbon Fiber composite shellVIVS VOSS international visor system is our built-in drop-down eyeshade that can be removed or replaced in seconds without tools707CF comes with a smoke visor and an extra clear visor!Extra clear, smoke, amber, and iridium are available to purchase from the selection!Smoke Visor and Iridium Visor have UV 380 Protection! Plush, removable, washable, breathable, moisture-wicking, antibacterial, microfiber linerDouble D Ring940 grams +/-DOT ApprovedIntermediate Round Headshape!

Read more less

Genuine Carbon Fiber composite shell VIVS VOSS international visor system is our built-in drop-down eyeshade that can be removed or replaced in seconds without tools 707CF comes with a smoke visor and an extra clear visor! Plush, removable, washable, breathable, moisture-wicking, antibacterial, microfiber liner Double D Ring 940 grams +/- DOT Approved Intermediate Round Headshape HELMET SIZING CHART SIZE INCHES CM X-Small 20 7/8" - 21-1/2" 53 - 54.5 Small 21 1/2" - 22 1/4" 54.5 - 56.5 Medium 22 1/4" - 23" 56.5 - 58.5 Large 23" - 23 7/8" 58.5 - 60.5 X-Large 23 7/8" - 24 5/8" 60.5 - 62.5 2X-Large 24 5/8" - 25 1/4" 62.5 - 64

Read more less

The perfect darkness of an anti-cosmic void, the Airflite Rubatone takes the “silence is louder than bombs” approach. Less graphics, and even more matte black – it’s the dark depth of your mind on the outside of your head. Meta, right? Yeah, we know. WORLD STANDARDMeets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.SHIELDIncludes internal DropShield™ and Clear quick-change fog-free FliteShield™. Dark Smoke FliteShield™ sold separately.LINERRemovable HydraDry™ moisture wicking liner.SHELLInjection molded Polycarbonate shell for strength. AIRFLITE HELMET SIZING CHART SHELL X-SMALL SMALL MEDIUM LARGE X-LARGE 2X-LARGE 3X-LARGE HAT SIZE 6 5/8 - 6 3/4 6 7/8 - 7 7 1/8 - 7 1/4 7 3/8 - 7 1/2 7 5/8 - 7 3/4 7 7/8 - 8 8 1/8 - 8 1/4 INCHES 20 7/8 - 21 1/4 21 5/8 - 22 22 3/8 - 22 3/4 23 1/8 - 23 1/2 24 - 24 3/8 24 3/4 - 25 1/8 25 1/2 - 26 CENTI-METERS 53-54 55-56 57-58 59-60 61-62 63-64 65-66

Read more less

The Qualifier DLX Mips full-face helmet is stacked with benefits and ready for the streets. The ProTint™ photochromic face shield adjusts to any light conditions you'll encounter, plus integrated audio compartments give your electronics a tidy hideout. DETAILS VERSATILITY AND PERFORMANCE Packed with features gleaned directly from our flagship Star line, the Qualifier DLX Mips delivers exceptional performance at incredible value. Safety is enhanced by the inclusion of the Mips energy management system. Qualifier DLX Mips is otherwise fully decked with aggressive styling, Velocity Flow ventilation, a removable, washable liner and a padded wind collar. This model comes with a NutraFog II anti-fog, anti-scratch Photochromic face shield. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information. SPECS SHIELD TYPE PHOTOCHROMIC ADAPTIVE CLICKRELEASE SHIELD INCLUDED CIRCUMFERENCE 53–54 CM CONSTRUCTION PADDED WIND COLLAR DRASTICALLY REDUCES WIND AND ROAD NOISE COUNTRY OF ORIGIN CHINA VENTILATION VELOCITY FLOW VENTILATION SYSTEM WITH FLOWADJUST PRODUCT WEIGHT 1626G +/- 50G (SIZE M) ELECTRONICS COMPATIBILITY INTEGRATED SPEAKER POCKETS CERTIFICATION DOT (US) ECE (EU) ANTI-FOG COATING ANTI-FOG COATING Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The SRT-Modular combines first class and grit to produce a helmet that gets you stoked to hit the streets. With class 1 optics in a flip-up Panovision shield, and lightweight fiberglass composite construction, the SRT-Modular is the obvious choice when you're ready to tear down the long roads.DETAILSVERSATILE PERFORMANCEThe new SRT-Modular combines the quality construction of the SRT – fiberglass shell, recessed EPS speaker pockets, a broad range of sizing options and Panovision Class 1 optics – and adds in the versatility and convenience of a modular helmet. All the protection of a quality full-face when you need it, as well as the ease and accessibility of an open-face for when you want to face the world head-on. SRT – putting the Sport back in Sport Touring. Includes clear faceshield. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information. SPECS SHIELD TYPE PANOVISION SHIELD WITH CLASS 1 OPTICS CONSTRUCTION MODULAR, FLIP-UP STYLE HELMET PRODUCT WEIGHT DOT: 1750G +/- 50G (SIZE M)|ECE: 1715G +/- 50G (SIZE M) ELECTRONICS COMPATIBILITY RECESSED EPS SPEAKER POCKETS CERTIFICATION DOT (US) ECE (EU) Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Qualifier DLX Mips full-face helmet is stacked with benefits and ready for the streets. The ProTint™ photochromic face shield adjusts to any light conditions you'll encounter, plus integrated audio compartments give your electronics a tidy hideout. SPECSIMPACT MANAGEMENT MIPS®SHIELD TYPE PHOTOCHROMIC ADAPTIVE CLICKRELEASE SHIELD INCLUDEDCONSTRUCTION PADDED WIND COLLAR DRASTICALLY REDUCES WIND AND ROAD NOISEVENTILATION VELOCITY FLOW VENTILATION SYSTEM WITH FLOWADJUSTPRODUCT WEIGHT 1626G +/- 50G (SIZE M)ELECTRONICS COMPATIBILITY INTEGRATED SPEAKER POCKETSCERTIFICATION DOT (US)ECE (EU)ANTI-FOG COATING ANTI-FOG COATING Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Product Features: Hand-Laid extra strength Fibreglass shell VIVS VOSS international visor system is our built-in drop-down eyeshade that can be removed or replaced in seconds without tools 707FRP comes with a smoke visor installed. Extra clear, smoke, amber, and iridium are available to purchase from the selection! Smoke Visor and Iridium Visor have UV 380 Protection! Plush, removable, washable, breathable, moisture-wicking, antibacterial, microfiber liner Double D Ring 940 grams +/- DOT Approved Intermediate Round Headshape HELMET SIZING CHART SIZE INCHES CM X-Small 20 7/8" - 21-1/2" 53 - 54.5 Small 21 1/2" - 22 1/4" 54.5 - 56.5 Medium 22 1/4" - 23" 56.5 - 58.5 Large 23" - 23 7/8" 58.5 - 60.5 X-Large 23 7/8" - 24 5/8" 60.5 - 62.5 2X-Large 24 5/8" - 25 1/4" 62.5 - 64

Read more less

For riders who demand that jump on and roll out experience! The Mag-9 has you covered for year-round duty with its feature-rich 3/4 styling, loaded with modern options. Feel the breeze or drop the face shield and cruise with confidence in your Mag-9. Loaded with options, the Mag 9 is versatility defined. With seven configurable visor and face shield possibilities, it's ready to take on whatever road you choose to travel. Whether it's an all-weather daily commute or a cross-country journey, snap your Sena or Cardo system into the factory-ready location using our brand-specific mounting kits and you'll be rolling in comfort and style. Includes Dark Smoke faceshield. SHIELD TYPE FAST AND EASY TOOL-FREE SHIELD CHANGESDROP-DOWN SUNSHIELD OFFERS "ON THE FLY" PROTECTION FROM THE SUNCONSTRUCTION HELMET CAN BE RUN IN MULTIPLE CONFIGURATIONS: WITH OR WITHOUT SHIELD AND WITH OR WITHOUT VISORVENTILATION VELOCITY FLOW VENTILATION SYSTEM FOR MAXIMUM COOLINGFIT SYSTEM 3 EPS SIZES FOR MAXIMUM COMFORT AND SIZE RANGEPRODUCT WEIGHT 1480G +/- 50G (SIZE M)ELECTRONICS COMPATIBILITYCONVENIENT SPEAKER POCKETS MAKE IT EASY TO SET UP THE MAG-9CERTIFICATION DOT (US). HELMET SIZING CHART SIZE CM IN HAT SIZE (IN) X-Small 54–55 21 1/4–21 5/8 6 3/4–6 7/8 Small 55–56 21 5/8–22 6 7/8–7 Medium 57-58 22 1/2–22 3/4 7 1/8–7 1/4 Large 58–59 22 3/4–23 1/4 7 1/4–7 3/8 X-Large 60–61 23 5/8–24 7 1/2–7 5/8 2X-Large 62–63 24 1/2–24 3/4 7 3/4–7 7/8 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield. Technical Details Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort Molded urethane chin bar pad features front and side vents for airflow CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer Molded recesses inside EPS interior shell accept select aftermarket audio and communication components Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow

Read more less

Lightweight fiberglass shell constructionPanovision shield with class one opticsRecessed EPS speaker pocketsEyewear compatibleIndustry-leading Five-year warrantyDOT, Snell certified HELMET SIZING CHART SIZE CM IN HAT SIZE (IN) X-Small 54–55 21 1/4–21 5/8 6 3/4–6 7/8 Small 55–56 21 5/8–22 6 7/8–7 Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

Gringo Helmet HELMET SIZING CHART SIZE HEAD MEASUREMENT US HAT SIZE X-Small 20⅞ – 21⅜ 6⅝ – 6⅞ Small 21½ – 22 6⅞ – 7⅛ Medium 22⅛ – 22⅝ 7⅛ – 7⅜ Large 22¾ – 23¼ 7⅜ – 7⅝ X-Large 23⅜ – 23⅞ 7⅞ – 8⅛ 2X-Large 24 – 24½ 7⅞ – 8⅛

Read more less

Polo Helmet Punisher

Read more less

The Bell Scout Air is a low-profile open-face helmet for riders who want minimal bulk and very light weight without giving up certified protection. Bell’s in-mold construction bonds the Tri-Matrix composite shell to the EPS liner, producing a compact shape that is easy to wear for commuting, cruising and everyday rides. Key Features and Benefits Tri-Matrix composite shell blends aramid, carbon fiber and fiberglass In-mold construction helps create a compact, lightweight profile Approximately 785 g ± 50 g in size medium Five shell and liner sizes help maintain a proportional fit Two snap-in visors included for easy style changes Compatible accessory shields are available separately DOT and ECE certified Sizing Guidance Measure around the widest part of the head, roughly one inch above the eyebrows, keeping the tape level. Repeat the measurement and use the larger result as your starting point. The helmet should feel evenly snug without painful pressure points and should move the scalp when gently rotated. Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

WORLD STANDARD Meets DOT FMVSS 218 (US), ECE 22-06 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country. SHIELD Includes Clear and RST Blue quick-change Fog-Free Icon Optics™ Shield with Prolock™ shield locking system. Includes Dark Smoke Internal DropShield™. LINER Hydradry™ moisture wicking liner. SHELL Injection molded polycarbonate shell for strength and durability.

Read more less

Product InformationPoly alloy, D-Ring A removable and adjustable (55mm) screw on visor 4 Exhaust vents positioned to maximize negative pressure suction 4 Shell intake vents Molded in goggle guides Replaceable chin vent for easy replacement or cleaning Cut out on shell sides to accommodate most neck brace designs Washable liner cheek pad Removable line, custom sizable cheek pad Adult expanded true fit sizing XS-XXL 3.00 LBS - DOT FMVSS No.218Color: BlackMarket Color: BlackGender: Mens/UnisexPrimary Color: BlackHelmet Type: Offroad HelmetsHelmet Category: OffroadItem Name: FX-15 Helmet

Read more less

Features Micrometric quick-release closure system Injection molded polycarbonate shell Drop down sun visor Fully removable moisture wicking liner Secure, snug comfortable fit

Read more less

Fly Odyssey Modular Helmet Solid is built for street riders who want protective coverage, clear vision, ventilation, and practical day-to-day comfort in one helmet.Features Safety: ECE Approved / D.O.T. Approved EPS Reinforced Chin Bar Dual D-Ring Chin Strap Shell: Advanced lightweight Polycarbonate Blend Shell Wind Tunnel Aerodynamic Design for quiet and comfort Versatility: Dual Density EPS adaptable to high and low speed impacts 2 in 1 Modular Design System: Street Mode / ADV Mode with Peak Visor 3-Position optically superior clear face shield with anti-fog coating and durable hard coating for scratch resistance Tinted drop down inner sun shield. 100% UVA/B protection up to 400 nanometers Integrated Mouth Vent Anti-Fogging System Comfort: *Optional Pinlock Option Qwick - Dry® comfort liner and cheeks pads. Hydrophilic liner absorbs sweat and is perforated to improve helmet ventilation Integrated speaker pockets built into the EPS for Bluetooth/Comm systems Removable, washable interior and removable chin curtain Venting: True Functional Ventilation (TFV) Two Point Super-Vent System Top with integrated exhaust vent Negative Pressure Wave Exhaust Spoiler to evacuate hot air What's in the box: Includes Soft Fleece Helmet Bag, Color Matched Peak Visor, and Color Matched Visor Block off Plates Why riders choose it Impact-management shell and EPS construction support street protection Ventilation and removable comfort components help manage longer rides Integrated vision features reduce the need to stop as light or conditions change FLY adult helmet size chart Size Head circumference Centimeters X-Small 20.5–21.25 in. 53–54 cm Small 21.25–22 in. 55–56 cm Medium 22–23 in. 57–58 cm Large 23–23.75 in. 59–60 cm X-Large 24–24.5 in. 61–62 cm 2X-Large 24.5–25.25 in. 63–64 cm How to measure: Wrap a soft tape around the widest part of the head, approximately one inch above the eyebrows and over the largest portion at the back. A new helmet should feel evenly snug without painful pressure points.Rider-informed FAQsHow do I choose the correct size?Measure the widest part of the head above the eyebrows and compare with FLY’s street-helmet chart. A new helmet should feel evenly snug without isolated pressure points; it should not rotate independently of the head.Can I install a communicator?The listed speaker pockets are intended to simplify Bluetooth or intercom installation. Confirm speaker thickness and microphone routing for your specific system.How should I manage fogging?Use the vents and breath deflector as designed, keep the shield clean, and use the compatible anti-fog or Pinlock option only when the specifications identify one.

Read more less

Injection-molded polycarbonate shell Closable chin and top vents, along with rear exhaust vent, allow increased airflow Easy to remove, scratch-resistant polycarbonate face shield Drop-down rigid sun visor is easy to operate using side-mounted lever Fully removable moisture-wicking polyester helmet liner and cheek pads Optional breath box, dual shield and electric shield allow you to convert the helmet for all-season use (sold separately)

Read more less

Although it may look unassuming, the Pit Boss is anything but a rudimentary cruiser helmet. With a removable neck curtain, internal sun shade, and comfortable fit thanks to the adjustable Speed Dial fit system, this lightweight helmet offers heavy-duty capabilities. SPECS: SHIELD TYPE Internal sun shade offers "on the fly" protection from the sun CONSTRUCTION Removable neck curtain for cold weather riding FIT SYSTEM Innovative speed dial fit adjustment system PRODUCT WEIGHT 690G +/- 50G (Size M) ELECTRONICS COMPATIBILITY Convenient Speaker Pockets make communication device set-up easy CERTIFICATION DOT (US) Before You Select a Size: Helmet-Fit Facts A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand. Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows. A new helmet should feel evenly snug around the entire head without sharp or painful pressure points. When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently. Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head. Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly. Why Come to Eagle Leather for a Helmet Fitting? Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone. For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more less

The Purple Haze Serpienti 988 is ready for the season!Lightweight injection-molded ABS/PC alloy shellMatte finishThe helmet fits an intermediate round head shapeVIVS VOSS Internal Visor System is our built-in drop-down eyeshade (UV380 Protection) that can be removed and replaced in seconds without the use of toolsPinlock 70 Anti-fog lens Ready! Select Pinlock 70 in anti-fog section*Fully adjustable Micrometric Ratchet Quick-release System for locked in securityVoss DryTech removable moisture-wicking comfort linerDual air-flow top vents and lower vent with a large closable exhaust port vent for controlled internal temperatureSpring-loaded visor, and chin curtain to minimize internal wind noiseDOT FMVSS 218 Certified for safety1650 gramsHelmets come stock with a Clear face shield, add an extra colored shield from the selection!

Read more less