Description
This official t-shirt is screen printed with a skeleton assassin across the chest area. Get yours today!
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
ASSASSIN RIDER T-SHIRT SIZING CHART
IMPERIAL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
LENGTH INCHES
29-30
30-31
31-32
32-33
33-34
WIDTH INCHES
20-21
22-23
24-25
26-27
28-29
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
LS2 INNOVENT SYSTEM at Front
Long Zipper Vent at Sleeve
Back Vent Opening Panel
Neck Comfort Pad Reflective Details to Improve Rider Visibility
Front Zipper
YKK Zipper Pants Ready
Good Air Permeability and Moisture Absorption
CONSTRUCTION
Oxford Fabric (Polyester)
Polyester Ripstop
Detachable Waterproof Liner
Waterproofing: (5000mm H2O)Breathability: (3000g/m2/24h)
Removable Thermal Lining
PROTECTION
Soft Slow Bounce Protector in Shoulder & Elbow
Safety Stitching in High-RIsk Zone
Removable CE Shoulder & Elbow Protectors
EN1621-1: 2012 Level 1
LS2 851 Back Protector, Level 2
Elbow Protector Pocket with Variable System
2 Protector Positions are Possible
Optional Back Protector Sold Separately
ADJUSTABLE
Velcro Collar Closure
Power Stretch Panels at Elbow & Back
Sleeve Cuff Width
Straps on Arms & Hips
LS2 Up & Down Slider Waist
STORAGE
2 Waterproof Hand Pockets
1 Membrane Pocket at Back
1 Cargo Pocket at Front
1 Inner Pocket
1 Internal Dry-Docket
MENS NORWAY JACKETS SIZING CHART
SIZES
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
4X-LARGE
5X-LARGE
HEIGHT
172
176
180
184
188
192
196
198
CHEST
93
97
101
105
109
113
117
121
WAIST
84
87
89
94
99
104
109
114
Features:
13" Black Heavy Duty Full Grain Oiled Leather Upper
Neoprene Oil-Resistant Sole & Heel
Cushion Insole
Square Soft Toe
O-Ring Ankle Harness Strap
Features:
Soft Cow Cuba Skin
Offered in Black or Brown
Three zip pockets detail
Hourglass shape for perfect fit
Three grommets under each arm for air flow
Two inner pockets
Full sleeve zip out liner
Tall Eagle Reflective Jacket
PRODUCT OVERVIEW:
Designed for the taller rider, the Tall Eagle Reflective Jacket is a fusion of style, comfort, and safety. The use of top-grade cowhide not only promises an elegant look but also ensures durability. Whether you're out on a chilly night or cruising on a sunny day, this jacket's versatile features have got you covered. With its reflective piping and a venting system, you're set for any adventure, day or night.
FEATURES:
Cowhide 1.2 to 1.3 mm
Removable Full Sleeve Zip-Out Liner
Zipper Controlled Venting System
Reflective Piping across Chest & Back
Action Back
Snap Closure Mandarin Collar
Heavy Duty Antic YKK Zippers
Zipper Closure Hand Warmer Pockets
2 Inside Pockets
Stretch Panel Sides
Velcro Adjustment Straps
FEATURES AND BENEFITS:
Cowhide 1.2 to 1.3 mm: Exudes a soft and luxurious feel while ensuring durability.
Removable Full Sleeve Zip-Out Liner: Adaptability for diverse weather conditions.
Zipper Controlled Venting System: Maintains a comfortable temperature by controlling airflow.
Reflective Piping: Improves nighttime visibility, enhancing safety.
Action Back: Guarantees unrestrained arm and shoulder movement.
Pockets: Offers handy storage with both internal and external options.
Stretch Panel Sides & Velcro Adjustment Straps: Allows for a snug fit, ensuring comfort and safety.
Description
MESH AF - BLACK
Constructed of a durable textile chassis comprised of large mesh front and rear panels which house a full suite of D3O impact protectors. “It’s too hot for a jacket” is no longer your excuse for riding unprotected.
Features:
FIT
Our attack fit jacket is designed with pre-curved arms to be tighter to the body and form fitting, making it aerodynamic and comfortable at speed. Its figure-hugging cut means this style could be worn over a T-shirt or other slim layer
MATERIAL
IRON WEAVE MESH - Our Iron weave mesh paneling is lightweight yet incredible resilient and allows maximum airflow for those hot riding days. The generous mesh paneling provides an abundance of cooling air, perfect for hot Summer days and warmer climates. When the temperature reaches triple digits, you can ride cool and comfortable
PROTECTORS
Impact protectors - EN 1621-2:2014 / EN 1621-1:2012. Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials
DETAILS
Pre-curved arms, Mesh riding jacket, Reflective accents
CONDITIONS
MILD to HOT to mild - Ventilation where you need it results in premium gear with maximum air flow and breathability for hot to mild riding conditions
WIND STRAP
The adjustable arm straps are quick and easy to use, providing the rider with a contoured and personalized fit
LADIES MESH AF JACKET SIZE CHART
JACKET SIZE
BUST
ARM
X-SMALL
33
29
SMALL
36
29.5
3X-LARGE
45-32
32
*Full Sleeve Zip Out liner*Side Set Waist Stretch Panels Designed for the Perfect Fit Every time*Generous Closeable Air Vents on Shoulders with Two Back Vents*Highly Reflective Day Night Striping Through Out the Front, Arms and Back of the Jacket*Built in Dual Side Concealed Weapon and Ammo Pocket
Description
At home on v-twin or a high performance sport bike, the classically styled Gripster offers unparalleled dexterity, fit, and grip.
Features:
Top Grain goatskin leather
Padded knuckles, palm, & thumb
Stretch panels at knuckles
Ultra short wrist cuff
Unlined fingers for dexterity and grip
Perforated holes on fingers and fourchettes
Reflective piping
1 year warranty
MEN'S GLOVES Sizing CHART
SIZE:
CIRCUMFERENCE:
Small
6”
Medium
7”
Large
8”
X-Large
9”
2X-Large
10”
3X-Large
11”
Description
Featuring a weather proof construction and a longer gauntlet, Joe Rocket’s Women’s Sub-Zero is a glove ready to take on the worst riding conditions. An easy cinch strap keeps the fit secure while the overall size stays small enough for quick movement on the motorcycle. Keep warm and dry in the most extreme riding conditions without sacrificing feel or mobility.
Features:
Wind & waterproof shell
Waterproof Dry Tech® mid liner
100g. Thinsulate® insulation
Slip resistant palm
Padded knuckles
Finger gussets for flexibility
WOMENS GLOVES SIZING CHART
GLOVE SIZE:
X-Small 6.5" :
Small 7.5" :
Medium 8.25" :
Large 9" :
X-Large 9.5" :
HAND ALL THE WAY AROUND
6.75"
7.75"
9"
9.5"
9"
PALAM ACROSS THE PALAM
34.5”
34"
3.75”
4”
4.25”
This full length t-shirt in the color black front side features a lady riding a motorcycle in the The back of this tee reads.
Features:
• 100% cotton• Double Sided Screen Print
Just Passed You Ladies Tee Sizing Chart
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART
36
38
40
42
44
LENGTH SHOULDER TO HIP
36
38
40
42
44
Features:
Ladies Premium Leather Vest With Black Paisley
With Black Paisley Liner
In Goat Skin
2 exterior zippered pockets
2 interior concealed carry pockets
Great flattering fit
Silver hardware with side laces
12V Socker Liner in BlackThe socks begin warming your feet within seconds using any 12V DC power source by connecting directly to the battery or the 12V accessory outlet. Our advanced heating technology allows you to maintain a constant level of thermal comfort at high speeds or altitude. Constructed of thin, lightweight Lycra Spandex Moisture wicking plus wind & water resistant Features a wide elastic band with a Velcro strap for an adjustable, comfortable fit around your calves Standalone operation - connect to y-harness which runs up your legs and plugs into your controller Use with heated pants - connect each sock to the corresponding plugs located at the bottom of the pants Heating elements are located at the top of your foot then wrap around your toes and under your foot Power: 27W @ 12V or 2.4A total Max Heat 135Â ° F Includes 60" Y-harness Needed for standalone operation Choice of controller & a battery harness (or accessory/BMW plug where applicable)Extra Small
Regardless of where you tear it up; track, canyon, or urban wasteland, the Scorpion EXO-R1 Air was designed, engineered and tested to meet the demands of Moto GP® and World Superbike® racing, while providing features that benefit every rider!
SHELLResin-infused TCT-U™ 3K carbon fiber shell composite weave provides aircraft-grade impact dispersal properties.CAD-refined aerodynamics resulting in a streamlined profile and balanced footprint minimizing both lift and turbulence for a smoother, quieter, and more stable ride.COMFORTAero-tuned ventilation comprised of a venturi-effect channeling system linked via adjustable dual ram-air intakes, and spoiler integrated exhaust. The result is high velocity airflow from front to back that pulls heat and humidity up and out for a cool, dry ride.Airfit® inflation adjustment system provides user-defined fit customization not only for comfort but for specific riding situations ranging from spirited canyon rides to long distance tours.Removable/washable KwikWick® III interior keeps you cool, dry and comfortable. Optional ‘Thinner’ Cheek Pads available here (sold separately)Comm-Ready speaker pockets allow for easily installation of your favorite BlueTooth® communication system speakers.KwikFit® 3D sculpted cheek pads accommodate eyeglasses.VISIONOptically superior Clear 2D MaxVision® Pinlock-Ready® face shield installed. Anti-scratch coated and offers 95% UV-A & UV-B protectionFREE Additional Dark Smoke 2D MaxVision® Pinlock-Ready® face shield and Pinlock® Anti-fog insert includedEllipTec™ II quick-release face shield mechanism with integrated center lock provides a superior shield-to-gasket sealVERSATILITYEmergency quick-release cheek pad system.Integrated reflective piping. (cheek pads)Included breath deflector and aero skirt. (chin curtain)SAFETYWeight: ± 1,383 grams / 3.05 lbs (size medium)Sizes: XS-2XL3-Shell sizes for a precision fitDOT FMVSS No. 218 Certified / ECE Approved5-Year warranty
HELMET SIZING CHART
SIZE
INCHES
CM
HAT SIZE
Small
21 5/8 - 22
55 - 56
6 7/8 - 7
Medium
22 7/16 - 22 3/4
57 - 58
7 1/8 - 7 1/4
Large
23 1/8 - 23 5/8
59 - 60
7 3/8 - 7 1/2
X-Large
24 - 24 3/8
61 - 62
7 5/8 - 7 3/4
3X-Large
25 9/16 - 26
65 - 66
8 1/8 - 8 1/4
Description
Heat-sealed backing for easy iron-on application.
Features:
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally rest itch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Extend your riding season with the Pant Liner. Our Pant Liner makes a great mid-layer piece to keep you riding in cold weather! Constructed of windproof, durable, Ripstop fabric, our liner fits close so you can wear it comfortably under your favorite riding pants. The liner has four Microwire™ heating zones in the leg and hip. Connect your Pant Liner to an EX Pro Jacket or Jacket Liner to create full-body warmth. Connections at the hem of each pant leg also allow the connection of heated socks and insoles.
Features & Benefits:
Pant has four Microwire heating zones: leg (2) and hip (2)
Pre-wired sock/insole connections at end of legs
Mini Ripstop nylon shell
YKK zippers
Heated Motorcycle Pant Liner
Build: Pant liner that fits close to the body and easily under your outer garments
Materials: Minirip shell, taffeta lining
Gerbing 12V Heated Pant Technical Specifications:
Battery Harness, & temperature controller required for stand-alone operation (sold separately)
Max Heat: 135 F @ 44W
Power: 12V DC 3.6 Amp
Material: Mini rip shell, Taffeta lining
Gerbing 12V Pant Power Options:
Plugged directly into our heated jacket
Powered by Battery Harness (temp controller or on/off switch recommended)
About the Gerbing 12V Power System:
The Core Heat 12 thermo velocity system is powered by a simple connection to your vehicle's DC power system. Core Heat 12 technology connects to your motorcycle, snowmobile, ATV, boat or even airplane to keep you warm at the temperature of speed.
Gerbing Microwire Heating:
The Microwire system is the most durable and efficient thermo-technology platform ever developed. Products incorporating Microwire technology utilize patented micro-sized stainless steel fibers intertwined and encased in a proprietary waterproof coating. Gerbing Microwire technology will provide even heating for ultimate comfort.
Size Chart
Size
Outseam
Long
Waist
X-Small
40
44
22.5 to 37
Small
40
44
25.5 to 39
Medium
40
44
28 to 42
Large
42
46
30.5 to 45
X-Large
42
46
34 to 49
2X-Large
44
37.5 to 53
3X-Large
44
41 to 57
How to Measure
Waist: Measure around the fullest point of your natural waist.Outseam: Measure along the outer leg from waist to floor, with riding footwear on. Tip: Best to have someone else measure you.
Description
Lexol provides vital lubrication to keep leather soft while maintaining its strength, durability and beauty. Microscopically fine oil droplets penetrate to combine with the fibers and stay there. This controlled lubrication lets lexol nourish and revitalize leather while avoiding seepage into adjacent materials. Lexol renews the rich luster of leather, assuring a smooth, satin finish while restoring the supple, comfortable feel. What's more, it gives immediate protection to wet or dry leather-without ever leaving an oily residue.
Lexol Leather Conditioner has a liquid base which allows the product to penetrate the surface into leather pores, for deep conditioning that helps prevent cracking and premature aging.
Lexol Leather Conditioner leaves no greasy residue and it contains no silicon ingredients which dry out leather over time. Lexol Leather Conditioner results in supple, strong, and beautiful leather.
Features:
Ideal for use on: leather auto upholstery, footwear, furniture, handbags & briefcases, sports equipment and luggage
Protects leather against cracking and premature aging
Details and Fit:
New Zealand Lambskin.
Front zipper closure.
Two inch Standup Collar.
Two hand pockets with snap closure.
Poly-filled liner.
One inside pocket with snap closure.
Clean by leather specialist.
Features:
Industry leading UltraMax® fabric for maximum UV protection
Mounts to luggage rack, sissy bar or seat using quick release and self-fastening straps
Divided upper and lower storage compartments with lockable zippers
Rigid construction an solid base panel prevents sagging
Zippered panel in top section converts bag to one massive compartment
Front pocket folds down to provide easy access to main compartment
Additional 3” expansion section and 3 generous outer pockets
Carrying handle for transport off the bike
Reflective piping enhances visibility; waterproof rain cover included
Main compartment: 15”L x 12”W x 12”H 35.5 Liters
Top compartment: 15”L x 12”W x 6”H 18 Liters
LIFETIME warranty
Description
The ingenious design of Hair Gloves keeps your ponytail free from knots and tangles, and has a clean look.
Features:
Full Grain Leather Ponytail Holder
Laced-Up Style
Hook It, Wrap It, Snap It!
Style No. (4) 11410, (8) 11810, (12) 11120
SENA 50s Universal Helmet Clamp Kit 50S-A0201
Universal clamp kit for the 50S Bluetooth motorcycle communication system.
Includes fasteners, speaker pads, microphone sponges, speakers and microphones, and more.
Part #: 50S-A0201
Complete your outfit with this rustic leather snap belt with tarnished brass buckle or stainless steel. Along the entire belt is beautiful stamping making this belt stand out! Made in the US.
These belts are made to be cut to fit. We can send them to you unfinished, or you can request specific sizing by emailing sales@eagleleather.com or calling us at 253-581-3220
Complete your outfit with this rustic leather snap belt with tarnished brass buckle or stainless steel. Along the entire belt is beautiful stamping making this belt stand out! Made in the US.These belts are made to be cut to fit. We can send them to you unfinished, or you can request specific sizing by emailing sales@eagleleather.com or calling us at 253-581-3220
Complete your outfit with this rustic leather snap belt with tarnished brass buckle or stainless steel. Along the entire belt is beautiful stamping making this belt stand out! Made in the US.
Description
Our Zenith Fleece Heated Jackets are the perfect combination of warmth, comfort and style. The soft feel and modern fit of these great heated jackets make them an absolute must-have this winter season.
Layer up for the cold with the Zenith Fleece Jacket. Exceptional warmth is delivered via three patented Microwire™ heating zones and a lofted anti-pill composition. Stay warm while others are feeling the cold bite.
Gerbing Gyde 7 Volt Battery Heated Jackets & Vests Include:
7 Volt 3400 mAh Rechargeable Lithium-ion Battery Pack (25.16Wh)
Wall Charger
Detailed Instructions
Gerbing Lifetime Warranty
Gerbing Gyde Zenith Fleece Heated Gear Features:
Three Microwire™ heating zones: Chest (2) & back
Lofted anti-pill fleece composition
Battery runs for 8hrs on low power, 6hrs on medium, 4hrs on high and 2hrs on extreme
135° F Maximum heat
Active heat retention technology
Water and Wind Resistant
Comfortable & Stylish Fit
Battery has 4 heat-settings as indicated by lights and Heat Times:
100% (4 red/blue lights) - 2 Hours
75% (3 red/blue lights) - 3 Hours
50% (2 red/blue lights) - 5 Hours
25% (1 red/blue lights) - 8 Hours
Charging Battery:
We recommend charging overnight for first charge
Charge 100% before use (a full charge takes about 3 hours)
A red light will appear on wall charger when charging
The red light will change to green when charged
Maintain at least 25% power when battery is not in use. This practice will prolong the life of any 7 Volt battery
How it Works:
Step 1: Power on by pressing and holding power button
Step 2: To change temperature, press and hold power button until LED light reflects desired setting. *Power level setting can only be indicated when connected to garment
Step 3: Check remaining battery life by disconnecting battery from product. Press and hold power button, LED indicator will show 1 to 4 lights
LED lights to indicate remaining power will illuminate (4 lights is full power)
Turning On the Heat:
Step 1: Locate power pocket; it will be on the wearers left outer pocket
Step 2: Open pocket and locate power plug
Step 3: Turn on battery by holding power button until it lights up
Step 4: Insert plug into battery port and push down to secure it in the plug holder
Step 5: Push power button on battery to select the setting you would like
Step 6: Place battery into pocket and close the pocket
Description
Protection and airflow makes the Covert Tactical Glove an ideal solution for summer’s big heat that just happens to come at a “double-take” price.
Features:
3D molded TPR flex knuckle armor plus padded palm and fingers
Reinforced fingertips, abrasion resistant palm, and double stitching in key stress areas
Mesh panels on the backhand, fingers, and thumb for maximum airflow
Stretch poly corduroy finger sidewalls and soft neoprene cuff enhance both comfort and mobility
Hook-and-loop wrist closure with molded TPR pull tabs
1 Year Warranty
COVERT TACTICAL GLOVES SIZING CHART
SIZES
CIRCUMFERENCE
SMALL
6"
MEDIUM
7"
LARGE
8"
X-LARGE
9"
2X-LARGE
10"
3X-LARGE
11"
Features
Made of Premium Synthetic Leather Faux Upper
Tall Boot Design
Heel and Calf Lace-Up Closure
Side Zipper Entry for Easy on and off Wear
Adjustable Buckle
Anti-Slip Bottom
Milwaukee Leather Signature Hardware
Features:
Proudly printed in the USA
100% satisfaction guaranteed
High definition print
In business since 1993
T-Shirts & Long Sleeves are 100% Pre-Shrunk Cotton
Hooded Sweatshirts are 50/50 Pre-Shrunk blend
Gift Idea For any Occasion: Christmas, Birthday, Father’s Day, Veterans Day, Memorial Day, Valentine’s Day, Retirement, and More.
Popular Tags: Dogs of Valor, This We'll Defend, Pit Bull Dog, Honor to Serve, American Bald Eagle, Soldier, Helicopter, Dogs of War, Flag of The United States
<p>100% Brand New and High Quality ! These ducks will squeak when you squeeze them.
Kids just love to play with them in the bathtub. Great for decorations, party favours or give away.This duck perfectly captures the caricaturized features of America's 45th President.A unique memento of one of</p>
Description
"CRASHING SUCKS" embroidered in white lettering on a black background with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs! Heat-sealed backing for easy iron-on application.
