The Qualifier DLX Mips full-face helmet is stacked with benefits and ready for the streets. The ProTint™ photochromic face shield adjusts to any light conditions you'll encounter, plus integrated audio compartments give your electronics a tidy hideout.
DETAILS
VERSATILITY AND PERFORMANCE
Packed with features gleaned directly from our flagship Star line, the Qualifier DLX Mips delivers exceptional performance at incredible value. Safety is enhanced by the inclusion of the Mips energy management system. Qualifier DLX Mips is otherwise fully decked with aggressive styling, Velocity Flow ventilation, a removable, washable liner and a padded wind collar. This model comes with a NutraFog II anti-fog, anti-scratch Photochromic face shield. Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.
SPECS
SHIELD TYPE
PHOTOCHROMIC ADAPTIVE CLICKRELEASE SHIELD INCLUDED
CIRCUMFERENCE
53–54 CM
CONSTRUCTION
PADDED WIND COLLAR DRASTICALLY REDUCES WIND AND ROAD NOISE
COUNTRY OF ORIGIN
CHINA
VENTILATION
VELOCITY FLOW VENTILATION SYSTEM WITH FLOWADJUST
PRODUCT WEIGHT
1626G +/- 50G (SIZE M)
ELECTRONICS COMPATIBILITY
INTEGRATED SPEAKER POCKETS
CERTIFICATION
DOT (US)
ECE (EU)
ANTI-FOG COATING
ANTI-FOG COATING
The Commando is a swat style vest crafted in Cowhide. It's got nylon side straps over adjustable side panels making it easy to adjust to fit you properly. The mesh lining has easy access panels for adding patches, and a pocket for armor. It's also got our conceal carry pockets and two zippered slash pockets.
Features:
1.1-1.2mm Drum Dye Cowhide
Swat style with roll-up collar, hidden snap closure and center zipper
Back Armor Pocket for our CE-2 Armor - Sold Separately
Two zippered slash pockets
Two conceal carry pockets with bullet snaps and tapered holsters
Nylon triple side strap component over adjustable side panels for adjusting fitment
Mesh lining with easy access panels for patches and embroideries
Black zippers and hardware
Looking for a clean, simple and classic set of chaps? The Bully is perfect for you - these chaps are unisex, unlined and feature stretch panels on the belt and inner thighs for comfort. Two pockets, and blacked out hardware keep the clean, black look going. All of our chaps come extra long so you can trim them to fit perfectly.
Features:
1.7-1.8mm Platinum Cowhide Leather
Heavy duty blacked out hardware and zippers
One pocket on each side
Four snap boot cuffs
Stretch panels on back of belt
Stretch panel on inner thighs for perfect fit
Unlined
The perfect darkness of an anti-cosmic void, the Airflite Rubatone takes the “silence is louder than bombs” approach. Less graphics, and even more matte black – it’s the dark depth of your mind on the outside of your head. Meta, right? Yeah, we know.
WORLD STANDARDMeets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country.SHIELDIncludes internal DropShield™ and Clear quick-change fog-free FliteShield™. Dark Smoke FliteShield™ sold separately.LINERRemovable HydraDry™ moisture wicking liner.SHELLInjection molded Polycarbonate shell for strength.
AIRFLITE HELMET SIZING CHART
SHELL
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
HAT SIZE
6 5/8 - 6 3/4
6 7/8 - 7
7 1/8 - 7 1/4
7 3/8 - 7 1/2
7 5/8 - 7 3/4
7 7/8 - 8
8 1/8 - 8 1/4
INCHES
20 7/8 - 21 1/4
21 5/8 - 22
22 3/8 - 22 3/4
23 1/8 - 23 1/2
24 - 24 3/8
24 3/4 - 25 1/8
25 1/2 - 26
CENTI-METERS
53-54
55-56
57-58
59-60
61-62
63-64
65-66
Keep your hands warm, even on the coldest riding days, with our 12V heated, insulated, and water-resistant G4 gloves. 100% leather construction provides a great fit and the basic protection you need for all types of riding. Microwire™ heating throughout, including the top and bottom of each finger. Our G4 Gloves are made to easily connect directly to the sleeve of your EX Pro Jacket or Jacket Liner in seconds.
Features
Premium Aniline cowhide leather construction
Microwire heating throughout the glove, including to the tip of every finger
AQUATEX breathable water-resistant membrane
150 grams of Thinsulate™ insulation
Impact-protected gel pads at the palm
Reflective piping
Touchscreen compatible index finger
Adjustable Velcro wrist closure
Gerbing 12V G4 Glove Technical Specifications
Plugs directly into your Gerbing Jacket Liner for instant power
Battery Harness, Y-Harness & temperature controller required for stand-alone operation (sold separately)
Premium Aniline cowhide leather construction
150 grams of Thinsulate™ insulation
Max Heat: 135° @ 13W Each
Power: 12V DC 1.1 Amp Each
Gerbing 12V Glove Power Options
1) Plugged directly into our heated jackets
2) Powered by Battery Harness and Y-Harness (temp controller or on/off switch recommended)
About the Gerbing 12V Power System
The Core Heat 12 thermovelocity system is powered by a simple connection to your vehicle's DC power system. Core Heat 12 technology connects to your motorcycle, snowmobile, ATV, boat, or even airplane to keep you warm at the temperature of speed.
Gerbing Microwire Heating
The Microwire system is the most durable and efficient thermo-technology platform ever developed. Products incorporating Microwire technology utilize patented micro-sized stainless steel fibers intertwined and encased in a proprietary waterproof coating. Gerbing Microwire technology will provide even heating for ultimate comfort.
Product Specifications
Premium Aniline cowhide leather construction
Microwire™ heating throughout the glove, including to the tip of every finger
AQUATEX™ breathable water-resistant membrane
150 grams of Thinsulate™ insulation
Impact-protected gel pads at the palm
Reflective piping
Touchscreen compatible index finger
Adjustable Velcro wrist closure
Max Heat: 135°F @ 13W Each
Power: 12V DC 1.1 Amp Each
Requires Battery Harness and temperature controller for operation (sold separately)
Men's 12 Volt Glove G4 Sizing Chart
Size
Small
Medium
Large
X-Large
2X-Large
3X-Large
Inches
8-8.5
8.5-9
9-9.5
9.5-10
10-10.5
11-11.5
Once again Scorpion EXO redefines value and versatility with the EXO-GT930 Transformer Modular helmet, by taking the traditional modular to the next level and offering you what no one else does. In seconds, and without tools, you can convert your full-face helmet to an open-face to meet changes in riding conditions, or your personal preference.Whether you choose to ride in full-face or open-face mode, both configurations also benefit from an integrated SpeedView® drop-down sun visor, which can be easily accessed by gloved hands. A detachable peak visor is also included for use in open-face mode, giving you an added layer of protection from the suns harmful rays, making it a true open-face helmet. Ventilation in full-face mode is provided by adjustable mouth and top intake vents and integrated rear exhaust vents that align perfectly with internal channels, keeping you cool when temperatures rise, and warm when temperatures drop.The dual homologated (DOT & ECE P/J) Advanced Polycarbonate shell and Multi-Density EPS provide the energy displacement and protection you need. And for those who need to stay connected, the EXO-GT930 was specifically designed to integrate with the new EXO-COM® BlueTooth® Communicator Kit while the large speaker pockets also make it compatible with many other com systems in the market.The EXO-GT930 modular helmet gives you the freedom to Transform your riding experience.
*Perfect size for light traveling*Easily mounts to most tail sections and seats*Self-adjusting hooks attach to bag with soft ties connecting to bike*Made from top quality Tri-Max® ballistic nylon with Fibertech accents*Bag maintains shape, has reflective piping and a lined interior*Reverse coil zippers helps keep out dust and dirt, keeping zippers working smoothly*Lockable Hi-density rubber zipper pulls operate easily with gloves*Adjustable compartment divider for better storage options*Mesh pocket and organizer under lid*Flush mount reflective carry handle*Protective material prevents slipping or marking*Converts into a convenient backpack using the shoulder strap which doubles as backpacks straps*Fully expandable top section*Includes a Lifetime "No Hassle” warranty and rain cover*Main compartment measures: 13”L x 11”W x 7”H Standard / 13”L x 11”W x 9.5”H Expanded*Holds 16.41 Liters / 22.26 Liters expanded
Features:
• Water resistant treated Rock Tex™ 450 outer shell• Two stage adjustable knee armor height• C.E. approved knee & hip armor• Heavy duty waterproof YKK® zippers on the lower legs and main front fly• Removable insulated liner• Variable Flow™ ventilation front & back thighs• Side seam lower leg zippers• Sure Fit™ adjustable waist• Adjustable back leg elastic to customize the fit and secure knee armor• 2 zipper cargo pockets, 2 back zip pockets• Melt resistant material on lower leg area• Reflective logos & stripes
LADIES BALLISTIC OVERPANT SIZING CHART
SIZES
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
1DIVA
2DIVA
WAIST
26-27
28-29
30-31
32-33
34-35
36-37
38-39
HIP
36-37
38-39
40-41
42-43
44-45
46-47
48-49
INSEAM
33
33
32
33
33
33
33
Love a club vest, but need more pockets? The Fairfax is the one for you. It's got eight hidden utility pockets under a flap in the front of this raw canvas vest, along with chest and slash pockets out front. Two conceal carry pockets are hidden inside in the black bandana print liner, which itself has an easy access panel to add patches and embroideries. And it's got an armor pocket for CE-2 armor!
Features:
20oz. Heavy Hitter Raw Canvas
Club style with covered snaps and cropped center zipper
Two buttoned chest pockets
Two buttoned slash pockets
Eight hidden utility pockets
Two conceal carry pocket with tapered holster (quick access on left hand side)
Three Panel Black bandana liner
Bottom easy access panel for patches and embroideries
Back armor pocket for our CE-2 armor.
Description
American Flag Reflective Motorcycle Embroidered patch that combines design with reflective material. The white portion of this patch reflects light to keep you visible on the road and anywhere you go. It's a great new twist on some old favorite motorcycle patches. Heat-sealed backing for easy iron-on application.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
20 oz. Heavy Hitter raw canvas
SWAT style vest with rolled collar and center zip
Nylon triple straps over adjustable side panels
Zippered hand pockets with Velcro pockets underneath
Two interior concealed carry pockets
Bottom easy access panel
CE armor back pocket
Description
The EX-Pro is a durable, windproof, waterproof 3-season riding pants that will keep you warm, comfortable, and safe. Coupled together with the removable 12V heated pant liner (included), it becomes a true four-season riding masterpiece. The pant connects easily to your jacket liner heat supply or can be run directly to the controller. Our heated socks or insoles can be easily added to the pant, by utilizing the connections at the bottom of the pant cuff. Whether you are a daily commuter or a world traveler, this is the ultimate riding pants! Loaded with premium components like YKK zippers, Knox CE rated Armor, 3M reflective and DWR coating, it is an exceptional value! This great heated motorcycle pant has all the features and benefits of our standard pant liner, plus additional insulation, and protection.
Features:
Genuine CORDURA 500 denier outer shell with rip-stop material in all impact areas
AQUATEX breathable waterproof G-Liner membrane in the outer shell with a Durable Water Repellent (DWR) finish
Removable insulated liner with four Microwire heating zones: leg (2) and hip (2)
Knox CE approved Armor at the knees in height adjustable pockets
Direct ventilation on the thighs
Super fabric panels on knees
Leather grip panels on the inside of the lower leg
Pre-wired sock / insole connections
Calf zippers with Velcro closure
Gerbing 12V Heated EX Pro Pant Technical Specifications:
Max Heat: 135° @ 44W
Power: 12V DC 3.6 Amp
Battery Harness and temperature controller required for operation (sold separately)
Gerbing 12V Power System:
Using our advanced interconnect system, Gerbing 12V garments plug right into your electrical system on your motorcycle, snowmobile, ATV, boat, or airplane for an unlimited source of power and keeps you warm at any temperature, any speed.
About Gerbing Microwire:
The patented Gerbing Microwire system is the most durable and efficient heating platform ever developed. Products incorporating Microwire technology utilize patented micro-sized stainless-steel fibers intertwined and encased in a proprietary waterproof coating. Gerbing Microwire technology will provide even heating for ultimate comfort.
Product Specifications
Genuine CORDURA™ 500 denier outer shell with rip-stop material in all impact areas
AQUATEX™ breathable waterproof G-Liner membrane in outer shell with a Durable Water Repellent (DWR) finish
Removable insulated liner with four Microwire™ heating zones: leg (2) and hip (2).
Knox™ CE approved armor at the knees in height adjustable pockets
Direct ventilation on the thighs
Superfabric™ panels on knees
Leather grip panels on the inside of lower leg
8” YKK® zipper for jacket / pants connection
Pre-wired sock / insole connections at end of legs
Calf zippers with Velcro closure
Max Heat: 135° @ 44W
Power: 12V DC 3.6 Amp
Battery Harness and temperature controller required for operation (sold separately)
Product Guides
Size Chart
Battery Harness Installation Guide
Care and Storage Instructions
Complimentary Items
GERBING 12 VOLT EX PRO HEATED JACKET
GERBING 12 VOLT BATTERY HARNESS WITH FUSES
GERBING 12 VOLT WIRELESS READY DUAL CONTROLLER
GERBING 12 VOLT DUAL WIRELESS REMOTE CONTROLLER
GERBING MEN'S 12 VOLT G4 HEATED GLOVES
GERBING 12 VOLT HEATED PANT LINER SIZING CHART
SIZE
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
STAND-ARD
38
40
42
44
46
48
WAIST (3)
25-27"
29-31"
33-35"
37-39"
42-44"
47-49"
Joe Rocket Outbreak BootsThe Joe Rocket Outbreak Boots are reinforced where the boot meets the shifter for added durability and feature a non-slip sole design for extra grip.Features:Matte finish leather chassisReinforced shifter panelNon-slip sole designDouble stitching in all stress areasPadded ankle cuff for added comfortRear pull loop
KIDS JACKET
0.06-0.07mm Soft Milled Cowhide Leather
Scooter style with banded collar and center zipper
Two buttoned slash pockets
Zippered sleeves with gusset
Side relief zippers
Underarm gussets and grommets
Action back
2 Year Eagle Leather Warranty
The ZAN Headgear Neoprene Face Mask features full coverage of the face and ears with stretchy, warm and water resistant 2mm thick neoprene. Like most ZAN Headgear face masks it has a black stretch nylon trim for added durability and clean finish. A hook and loop closure allows for adjustability and ensures great fit, and can even be lengthened with our Neoprene Extension Piece (sold separately). Provides coverage of the ears, nose and cheeks from the elements. Can be used with or without a helmet. One size fits most. Blue Chrome Skull design, reversible to Black. Material: 70% Neoprene, 30% Polyester. U.S. Patented design.
Features:
Youth Sized Side Laced Vest
Soft Subtle Leather 1. 0mm
Snap Front Closure
Side Lace for Custom Fit
Two Lower Hand Pockets
Bar Design w/ Straight Bottom
For the In-between Kids & Adult Sizes
Adjustable Side Laces for an Optimal Fit
2 Outside Lower Hand Pockets with Zipper Closure
Straight Bottom Design
Plain Back Panel – Perfect for Embroidery or Club Patch.
YOUTH SIZED SIDE LACED VEST SIZING CHART
POINT OF MEASUREMENT
CHEST
CENTER B / L
18
19
19 1/4
20
21
19 3/4
22
23
20 1/4
24
25
20 3/4
26
27
21 1/4
28
29
21 3/4
30
21
22 1/4
32
33
22 3/4
34
35
23 1/4
36
37
23 3/4
38
39
24 1/4
Description
Schampa's Z-Wraps are known worldwide as the most comfortable headwrap available. Made of wickable and breathable fabric, Z-Wraps are a must under the helmet, during workouts, and while out in the sun.
Features:
The Original SCHAMPA Stretch Headwrap
Designed Riders, Athletes, but used by Hospitals, Restaurants, and Cancer Patients
Soft, Comfortable, Form Fitted
SCHAMPA Z-Wraps were designed out of the need for a truly perfect headwrap
Comes in Solids, Prints and our Breathable Mesh
One Size Fits Most
Works with Most Helmets, best with 1/2 helmets, Snow Helmets, Beanie Style Helmets or worn alone
The 312 is a bag specifically designed to fit custom bikes and choppers. It is made to attach to the swing arm with leather belts. It measures 10" x 11.5" x 3" and comes as a single bag. It also comes in the fatter version 312X which measures 10" x 11.5" x 5". It usually works on left sides unless there is a left side mounted license plate. It may work on the right side as well. Works on Harley Davidson Softails, Yamahas and Kawasaki. The 312X measures 10x11.5x5.
DescriptionOur Cooldanna® offers hours of cooling relief for hot conditions after the safe non-toxic cooling crystals are activated with water. Can be worn around the head or neck and reused multiple times. Reusable bag included for on the go use. ZANheadgear® exclusive designs. One size fits all.
Features:
Men's 6 Inch Side Zipper
Plain Toe Boot
Full Grain Premium 2. 2mm Cowhide Waterproof Leather
Oil & Acid Resistant Outsole w/Non-Skid & Non-Marking Tread
Side Zipper w/ Plain Toe Design
Welt Construction Side Zipper Entry W/ Milwaukee Signature Hardware
Smart Mask Climate Control Insole w/ Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
Features:
Full Grain Premium 2. 2mm Cowhide Waterproof Leather
Oil & Acid Resistant Outsole w/Non-Skid & Non-Marking Tread
Lace to Toe Design, Welted Construction
Left & Right Side Zipper Entry W/ Milwaukee Signature Hardware
Smart Mask Climate Control Insole w/Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
Metal Toe Piece for Aesthetics and Rivets for Durability
Metal Reinforced Pull Tab For Easier Entry
Fieldsheer®’s Mobile Cooling® neck gaiter brings cooling comfort no matter your pursuit. Perfect for everyday use, fishing, hiking, camping, gardening, working outdoors, and more, this neck gaiter will cool your core and keep you out longer. Constructed in drirelease® environmentally friendly 90% recycled polyester with powerful UPF 50+ sun protection and effective moisture-wicking technology, this gaiter offers all-day comfort. 4x faster frying than traditional knits, the Mobile Cooling® neck gaiter is ideal for even the hottest conditions.
Description
"What Happens In The Garage... Stays In The Garage" embroidered in white and red on a black background with red trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
Made with Polypropylene (Helmet Material)
Polycarbonate Lenses
Matte Black Mask
Soft-Airy Foam Lining for Comfort
Meets ANSI Z80.3 Standard for Eyewear
Nose and Mouth Foam Covered Ventilation
Each Pattern Is Unique and Will Vary
Adjustable Strap
Full-Face Coverage
Smoke Lenses with G-Tech Red Coating
Features:
Injection molded polycarbonate shell
Fully removable moisture wicking liner
Drop down sun visor
D-ring closure system
Secure, snug comfortable fit
DOT approved
Choosing the Correct Helmet SizeHelmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.Head Measurement InstructionsWrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart to the right.Helmet Sizing InformationTo achieve proper helmet fitment, begin by finding your head circumference size using the method described. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheek pads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheek pads can be purchased to obtain the best fit.Note:Sizing information is provided by the manufacturer and does not guarantee a perfect fit. Please use this chart as a guide only.Size Chart
Features:
Comfortable and edgy, waffle knit, long sleeve thermal with black contrasting binding and cuffs, silver rhinestones on the front yoke and graphic and features a black wings and motorcycle graphic
Self Fabric: 70% Polyester, 26% Rayon, 4% Spandex
Contrast: 95% Rayon, 5% Spandex
SPEED MASTER THERMAL SIZING CHART
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
INCHES
31-33"
34-35"
36-38"
39-41"
42-44"
45-47"
Description
BANCROFT GLOVE - WOMEN'S
Ready for a ride in winter weather, the Bancroft all-leather winter gloves will keep your digits warm and comfortable thanks to water-resistant leather covering the waterproof, breathable membrane, finished with an anti-microbial soft tricot liner. Protection is handled thanks to the gauntlet design, knuckle armor and padded fingers. A wrist securing strap and adjustable closure strap ensure a perfect and secure fit.
Features:
Size: X-Small, Small, X-Large, 2X-Large
WOMEN'S BANCROFT GLOVE SIZING CHART
SIZE
HAND-MEASURE-MENT
X-SMALL
5 1/2" - 7"
SMALL
5 1/2" - 7"
X-LARGE
9 1/2" - 10"
2X-LARGE
10" - 12"
KIDS VEST
.06 -.0mm S7oft Milled Cowhide Leather.
Club style vest with banded collar and covered snaps
Two buttoned chest pockets.
Two buttoned slash pockets.
Features:
Full Grain Premium 2. 2mm Cowhide Waterproof Leather
Oil & Acid Resistant Outsole w/Non-Skid & Non-Marking Tread
Full Length Lacing w/Square Toe Design, Welt Construction
Side Zipper Entry w/ Milwaukee Signature Hardware
Smart Mask Climate Control Insole w/ Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
Men’s White Lightweight Sleeveless Denim Shirt8oz 100% Cotton DenimLightweight & ComfortableButton Front Traditional ClosureTwo Button Close Chest PocketsFrayed Sleeves for the Correct Look
Features:
1.0-1.1mm Premium Goatskin Leather
Full Sleeve Zip Out liner
Adjustable Side Zippers for Comfort
Two Arm & Back Vents
Dual Inside Concealed Weapon Gun Pockets
Hidden Snaps allow Full Front Closure
Two Lower Hand Warmer Pockets
Interior Electronic Media Pocket with Wire Feed
An every-occasion helmet with the adaptability to excel no matter where your next journey takes you, the NEOTEC II does it all with style and precision. The convenient “flip-up” versatility of a true two-in-one helmet combined with next-level aerodynamics, an internal sun shield, the Pinlock® EVO fog-resistant system, and the ability to seamlessly integrate with the all-new SENA SRL/SRL2 Communication Systems, the NEOTEC II is the pinnacle of modular helmet design for today’s hybrid motorcyclists.
Seamless “flip-up” versatility of a true two-in-one helmet
Wind tunnel-tested shell aerodynamics and noise-reduction technology
Designed for seamless integration with SENA SRL/SRL2 Communication System
Convenient flip-down internal sun shield
Next-level modular helmet design for today’s hybrid motorcyclists
MODULAR SYSTEM
The NEOTEC II’s revamped modular, “flip up” functionality offers the convenience and versatility of a full-face helmet that converts smoothly and seamlessly into an open-face configuration for a true two-in-one design.
INTERCOM READY DESIGN
Designed for seamless integration with the SENA SRL/SRL2 Communication System
SRL/SRL2 are specially developed for the NEOTEC II, and are sold exclusively by SENA
For more information on the SENA SRL/SRL2 Communication Systems, please contact our team of experts.
FLIP-UP CHIN BAR & FACE SHIELD
Safety and protection of a full-face helmet
While at rest, converts instantly into an open-face configuration
Large lock release button facilitates easy handling with gloves
Lightweight chin bar/face shield rotate with smooth precision on a variable eccentric-axis, yielding the seamless versatility of a true two-in-one design
All-new dual locking system for improved holding power when in the fully-opened position
360° PIVOT LOCKING SYSTEM
Road tested and made of high-quality stainless steel components
Safe and secure closure when chin bar is in the down, locked position
AERODYNAMICS
In addition to its streamlined shape and shell-integrated spoiler, the NEOTEC II’s innovative top air outlet design along with the chin bar’s ‘Aero Deflector’ and ‘Vortex Generator’ lip reduce unwanted wind noise while helping to manage airflow around the helmet in varying riding position.
Learn More
Wind tunnel-tested aerodynamics optimized for varying riding positions
Shell-integrated spoiler has been reshaped/repositioned to further reduce lift and drag
Top air outlet serves as a spoiler while in an upright riding position
Newly designed ‘Aero Deflector’ for improved chin bar aerodynamics
SHIELD SYSTEM
The NEOTEC II’s advanced shield system provides a large, distortion-free view, facilitates smooth and easy shield changes, and comes equipped with an internal sun shield that offers riders instant relief from sun glare in one quick motion.
CNS-3 SHIELD
All-new design provides improved air/water sealing and noise reduction
Protects from 99% of the sun’s damaging UV rays
3D injection-molding ensures distortion-free view throughout the entire field of vision
New airtight window beading drains/prevents water from entering helmet
Comes equipped with a Pinlock® EVO fog-resistant system
CNS-3 BASE PLATE SYSTEM
Facilitates smooth and easy shield changes
SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal
INTERNAL SUN SHIELD
Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion
Large, easily located switch activates the 3D injection-molded inner shield
Distortion-free view blocks 99% of the sun’s damaging UV rays
Forehead area of outer shell is raised slightly to accommodate the internal sun shield, allowing for the integrity of the helmet’s inner EPS liner to remain intact
Exceeds ANSI Z80.3-2010 Standard for non-prescription eyewear
VENTILATION PERFORMANCE
Equipped with large upper and lower vent shutters for ease of use with riding gloves, an expanded 3-position upper vent for optimal air intake customization, and uniquely-positioned upper exhaust outlet vents, the NEOTEC II’s ventilation is ready for every adventure.
Large upper and lower vent shutters for ease of use with riding gloves
Expanded 3-position upper air intake for increased ventilation performance
All-new exhaust outlets flank upper air intake for improved hot-air clearing
Wind tunnel-optimized for dramatically-improved cool-air intake and hot-air expulsion
SAFETY
Few characteristics of a motorcycle helmet are as critically important as its first and second layers of defense, which is precisely why the NEOTEC II features the SHOEI-exclusive Multi-Ply Matrix AIM shell and Multi-Piece EPS liner. The all-new stainless-steel Micro Ratchet Chinstrap offers quick and secure closure with unrivaled comfort and adjustability.
MULTI-PLY MATRIX AIM+ SHELL
Proprietary technology integrates a five-ply matrix
Hand-laid interwoven layers of fiberglass with organic fibers and resin
Shell-integrated spoiler with consistent shell thickness guarantees proper strength and weight
MULTI-PIECE EPS LINER
Provides enhanced impact absorption by utilizing varying densities of foam
Allows cooling air to travel unrestricted through tunnels created in the EPS
Precise placement of multi-density EPS material yields a more compact, lightweight design
COMFORT
The NEOTEC II is equipped with a fully removable, washable, adjustable, and replaceable interior system that’s been enhanced for a comfortable fit and maximum helmet stabilization during high-speed riding. All-new ‘Noise Isolator’ cheek pads reduce unwanted road noises for advanced comfort.
INTERIOR COMFORT SYSTEM
Fully removable, washable, replaceable, and adjustable
Exclusive Max-Dry material absorbs and dissipates sweat 2X faster than traditional nylon
Three-dimensionally shaped to match the contours of a rider’s head
Multi-layer cheek pads for comfort and helmet stabilization
Premium two-tone interior fabric and red stitching accentuate the unmatched fit and finish
Optional interior components available in different sizes for a customizable fit
Cheek pad channel for eyeglasses
MICRO RATCHET CHINSTRAP
Patented 100% stainless steel interlocking mechanism
Quick and smooth closure and opening
Comfortable and easily-adjustable
HELMET SIZE CHART
SIZE
HAT SIZE
CM
INCHES
X-Small
6 5/8 - 6 3/4
53-54
20 7/8 - 21 1/4
Small
6 7/8 - 7
55-56
21 5/8 - 22
Medium
7 1/8 - 7 1/4
57-58
22 1/2 - 22 7/8
Large
7 3/8 - 7 1/2
59-60
23 1/4 - 23 5/8
X-Large
7 5/8 - 7 3/4
61-62
24 - 24 3/8
2X-Large
7 7/8 - 8
63-64
24 3/4 - 25 1/8
3X-Large
8 1/8 - 8 1/4
65-66
25 5/8 - 26
HOW TO MEASURE YOUR HEAD SIZE
To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead).
Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets.
THE PERFECT FIT
No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.
To determine the proper helmet fit and learn how to safely secure your chinstrap retention system, we recommend viewing SHOEI's "Helmet Fit" video below, or consult with an authorized SHOEI dealer today. Proper fit is important not only for comfort, but for safety, as well.
Excellent on metal, rubber, vinly, and plasticA clean, non-foaming coating which provides a water-resistant high gloss shine. This product brightens and renews any metal, vinyl, rubber or plastic surface. Great for those hard-to-reach places. Use for engines, tires, trim, rubber bumbers, a/c vents, etc.
'-Premium Cowhide: leather stretches to your head.-One Size: fits most people.-Perforated Top Panel: allows airflow and cooliing. -Leather Straps: tie in the back for a snug fit.
Description
The most comfortable gloves you will ever put on. Unlined motorcycle glove. Soft and Supple on both the inside and outside. These are just the nicest glove you will ever own, hands down.
Features:
Brown Deerskin Driver
Elastic Shirred Wrist
Keystone Thumb
Unlined
Description
SCHAMPA FaceFit FaceMasks fit your Face it’s that simple. No more Facemask moving or sliding around. The FaceFit line is the first of its kind that molds to your face. Easy Breath Mesh Mouth and Nose Piece. Lined with Coolskin fabric, these lightweight facemasks can be used year-round. Great for blocking Dust, Sand, Sun, Wind, and Cold. Our Patent Pending design is second to none.
Tested & Proven In
King of the Hammers
Glamis / Gordon's Well
Baja California (NORRA 1000 and Pre-Running)
Sturgis Run from Arizona
UTV Rally's
Cambodia - Always
India - Desert Ride
Features:
Facefit System - Moulds to your Face
Ergonomic Fit
Known as Face Shield
Wicks & Breathes
Coolskin Liner (Moisture Management Fabric)
Mesh Front for Easy Breathing
Protection from Sand, Dust, Wind, Sun, and Cold
Relaxed Fit
Year Round Use
One Size Fits Most
Best Seller
Features:
NEMESIS
Diamond cowhide
Scooter style with center zipper
Mandarin collar
Front zippered pockets and vents
Fully vented
Adjustable waist belt
Large side stretch panels on each side
Concealed carry pockets with tapered holster for a more stable fit
Full sleeve, zip-out, insulated thermal liner
Armor pockets for CE1 rated inserts
Features:
Roll-off resistant shell design
Two-stage built-in drop-down sun shield
Ported flow through ventilation
Kinetic Polymer Alloy (KPA) shell uses nanotechnology to blend aramid fibers and high-end polymers to better manage energy
Meets or exceeds DOT FMVSS 218 certification
2 year warranty
COMFORT
Technologically advanced half shell with rolloff resistant design. The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool
VISOR
Builtin, two-stage drop-down sun shield is scratch and UV resistant. Removable peak
SECURITY
DOT-approved quick release chin strap for secure closure. State of the art multi-density EPS
VENTILATION
Fully adjustable, multiport, dynamic, flowthrough ventilation with ported EPS to keep you cool
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
Description
We took our experience using waterproof / breathable laminated fabrics, and crafted a light weight seam sealed jacket with large direct core vents that can be used when it's warm or when it gets cold and wet. Unlike traditional venting systems that send air to the outside of a liner, the direct core vents send air directly to the wearers body and is therefore more effective. when the weather changes from good to bad, all you have to do is zip a few waterproof vents shut, to keep riding. No more zipping in a separate waterproof liner. An EverHeat thermal liner is included for those chilly days or when the temperature drops. the jacket has Exo-Tec ® CE certified armor on the elbows and shoulders, and a pocket with PE foam as a back pad that can be upgraded. go ahead, ride when you want, in whatever weather you want.
Features:
Waterproof / Breathable laminate outer fabric is fully Seam Sealed
Double zippered center front to prevent leaks
Two waterproof zippered Direct Core Ventilation vents on upper torso
Two rear exhaust vents on lower back
NightViz Reflective on torso and arms for increased nighttime visibility
Waterproof Napoleon pocket in upper torso, two internal storage pockets and one internal media pocket
Exo-Tec CE rated armor Shoulders & Elbows
Removable EverHeat Thermal liner included
Comfortable micro fleece lining at collar
YKK Zippers
8" Jacket to pant zipper as well as belt loop fastener
3 Year Warranty
MEN JACKET SIZING CHART
SIZE
CHEST
SLEEVE
Small
36" - 38"
25.5"
Medium
38" - 40"
26
Large
42" - 44"
26.5"
X-Large
44" - 46"
27"
2X-Large
46" - 48"
27.5"
3X-Large
48" - 50"
27.75"
Chosen number one by many boot manufacturers and outdoor enthusiasts, Aquaseal waterproofing paste creme has proven itself reliable to waterproof and condition all types of leather. This unique product combines conditioning oils similar to those used by tanneries, extremely viscous silicone, and a blend of waxy substances. This achieves maximum waterproofing and conditioning, while retaining leather breathability and durability. Aquaseal is easy to use and leaves no sticky residue.
Description
Asphalt Angel Double Sided Full Cut. This full length T-shirt in the color black reads "Asphalt Angel" with halo and wings on the front and a large winged motor with a halo printed on back.
Features:
100% cotton
Full Length T-Shirt
Double Sided Screen Print
Proudly printed in the USA
This full length t-shirt in the color black reads "Asphalt Angel" with halo and wings on the front and a large winged motor with a halo printed on back
ASPHALT ANGL T-SHIRT SIZING CHART
SHORT SLEEVE MEASUREMENTS IN INCHES
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOULDER TO HIP
25
25
26
27
28
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
EARTHTONES HEADDRESS T-SHIRT SIZING CHART
SIZE(IN)
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
CHEST
38-40
42-44
46-48
50-52
54-56
WAIST
32-34
36-38
40-42
44-46
48-50
SLEEVE - COLLAR CENTER TO WRIST
33-34
34-35
35-36
36-37
37-38
