Other Patches

Product Information: Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!

Read more less

Features: Size: 5" x 3" Material: Polyester, Rayon Care: Machine washable can be ironed on most fabrics Glue on back

Read more less

Features: Size: 4" x 3" Material: Polyester, Rayon Care: Machine washable can be ironed on most fabrics Glue on back

Read more less

Features: Size: 4.5" x 3.75" Material: Polyester, Rayon Care: Machine washable can be ironed on most fabrics Glue on back

Read more less

Description "Ride Forever Free, V-Twin Life" inside of a pinstripe shield/flame design with heat sealed backing for easy iron-on application. All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily. Patch Sewing Instructions: Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start. Identify where you want the patch and outline the area with tailor’s chalk Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment Position your inside hand so it is resting flat between the lining and outlines area Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot Finally restitch the garments lining and your all set Patch Iron-on Instructions: Preheat your iron to 325-335 degrees Do Not Use Steam Press the area where you want your patch to be for 25 seconds Position the patch on the garment so that it is positioned where you would like it to be Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds The iron should never come into direct contact with the patch Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute Turn the garment right side in once more, use your clean lightweight cloth to cover the patch Iron the edges of the patch through the cloth to ensure they are thoroughly sealed Let the garment cool completely before wearing

Read more less

Product Information: Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!

Read more less

3-Inch (3") rubber duck devil patch.

Read more less

Eagle Dream Catcher 8" X 8"

Read more less

Product Information: Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!

Read more less

Description A vibrant, original design of a Native Eagle with heat sealed backing for easy iron-on application. Our Native Eagle Patch is a 4" x 4" sized patch featuring a Native American design eagle in red, white, blue and black. Embroidered patch with heat sealed backing. Perfect for leather jackets and leather vests. Get yours today! All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily. Patch Sewing Instructions: Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start. Identify where you want the patch and outline the area with tailor’s chalk Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment Position your inside hand so it is resting flat between the lining and outlines area Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot Finally restitch the garments lining and your all set Patch Iron-on Instructions: Preheat your iron to 325-335 degrees Do Not Use Steam Press the area where you want your patch to be for 25 seconds Position the patch on the garment so that it is positioned where you would like it to be Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds The iron should never come into direct contact with the patch Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute Turn the garment right side in once more, use your clean lightweight cloth to cover the patch Iron the edges of the patch through the cloth to ensure they are thoroughly sealed Let the garment cool completely before wearing

Read more less

Product Information: Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!

Read more less

Product Information: Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!

Read more less

Description Heat-sealed backing for easy iron-on application. "Paid in Full" Cross design.

Read more less

Description All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily. Patch Sewing Instructions: Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start. Identify where you want the patch and outline the area with tailor’s chalk Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment Position your inside hand so it is resting flat between the lining and outlines area Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot Finally restitch the garments lining and your all set Patch Iron-on Instructions: Preheat your iron to 325-335 degrees. Do Not Use Steam Press the area where you want your patch to be for 25 seconds Position the patch on the garment so that it is positioned where you would like it to be Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds The iron should never come into direct contact with the patch Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute Turn the garment right side in once more, use your clean lightweight cloth to cover the patch Iron the edges of the patch through the cloth to ensure they are thoroughly sealed Let the garment cool completely before wearing

Read more less

Rubber Duck Patch

Read more less