Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Asphalt Angel Double Sided Full Cut. This full length T-shirt in the color black reads "Asphalt Angel" with halo and wings on the front and a large winged motor with a halo printed on back.
Features:
100% cotton
Full Length T-Shirt
Double Sided Screen Print
Proudly printed in the USA
This full length t-shirt in the color black reads "Asphalt Angel" with halo and wings on the front and a large winged motor with a halo printed on back
ASPHALT ANGL T-SHIRT SIZING CHART
SHORT SLEEVE MEASUREMENTS IN INCHES
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOULDER TO HIP
25
25
26
27
28
Description
This official t-shirt is screen printed with a skeleton assassin across the chest area. Get yours today!
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
ASSASSIN RIDER T-SHIRT SIZING CHART
IMPERIAL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
LENGTH INCHES
29-30
30-31
31-32
32-33
33-34
WIDTH INCHES
20-21
22-23
24-25
26-27
28-29
Replacement Iridium Shield for the LS2 Assault III
Change the look of your LS2 Assault III while replacing a worn or scratched outer shield. These genuine LS2 iridium shields provide a wide field of view and are available in Dark Electron and Light Electron finishes to match your preferred style and light transmission.
Features
Designed specifically for the LS2 Assault III helmet
Optically correct A Class polycarbonate construction
Scratch resistant and UV resistant surface
Wide vision design preserves peripheral visibility
Quick release fit makes shield changes simple
Pinlock 70 MaxVision ready
Available in multiple Dark Electron and Light Electron iridium colors
Fitment
Fits the LS2 Assault III helmet only. Check the model name on the back of your helmet before ordering. This shield does not fit earlier Assault helmet models.
Important
Iridium and tinted shields reduce visible light and are intended for appropriate daylight conditions. Carry a clear shield when riding after dark or in poor visibility. A Pinlock insert is not included.
Included: One LS2 Assault III outer shield in the selected finish.
The Assault III delivers bold street styling with the everyday features riders use most. Its Kinetic Polymer Alloy shell combines with multi-density EPS, an emergency-release system, and a reinforced chin strap for dependable protection. The wide-vision, quick-release shield is scratch- and UV-resistant, backed by an internal sunshield and an included Pinlock 70 MaxVision insert. Color-matched vent panels and pre-installed colored shields give each graphic a distinctive finish, while the removable, breathable liner and magnetic chin curtain enhance comfort. Meets ECE 22.06 and DOT FMVSS 218 standards.
WHAT IS IN THE BOX● Elastic carrying bag● Pinlock 70 MaxVision insert
SHELLSafety Standard● ECE 22.06 and DOT FMVSS 218Material● Kinetic Polymer Alloy (KPA)Weight● 1600g +/- 50gSizes● XS-S / M-L / XL-3XL - Sizes (3 Shells)EPS● XS / S / M / L / XL-3XL - 5 EPSLiners● XS / S / M / L / XL / 2XL / 3XL - 7 LinersCheek Pads● XS-XL / 2XL / 3XL - 3 Cheek Pads
COMFORT● Extra-comfort liner● Removable, washable, and breathable● Hypoallergenic and antibacterial
SHIELD● Anti-scratch and UV-resistant● Wide-vision shield● Quick-release system● Pinlock 70 MaxVision insert included● Sunshield with easy-remove mechanism● Double-injection shield seal● Two shield versions available: Dark Electron and Light Electron
SECURITY● Micrometric buckle● Emergency release system● Reinforced chin strap● Magnetic chin curtain● Shield button lock
VENTILATION● Channeled EPS● Top and chin vents with colored panels; color depends on graphic● Exhaust ports with colored panels; color depends on graphic● Breath deflector
FULL FACE STREET
The LS2 Assault full-face motorcycle helmet offers the performance and features of helmets costing two to three times as much, but because we build it in our own factory, LS2 is able to offer it at an incredible value. The shell is uses LS2's proprietary KPA. It's light, but strong. Easy to use and fully adjustable top vents are ported to allow true flow through ventilation.
The LS2 ASSAULT includes a Pinlock insert at no extra charge.
MATERIAL
Kinetic Polymer Alloy (KPA)
WEIGHT
1450 (±50 gr.)
SIZES (2 Shells)
XS-M / L-3XL
SHELLMeets or exceeds DOT FMVSS 218 and ECE 22.05.1450g,+/-50g.Sizes XS-3XL. Made from Kinetic Polymer Alloy (KPA).2 Shells.Intermediate Oval.
COMFORTHighest quality, removable, washable, technical fabric liner wicks moisture to keep you cool. 3D Laser-cut cheek pads for all day comfort with no hot spots.
VISOR"A Class" Polycarbonate face shield is optically correct, scratch and UV resistant. Includes Pinlock insert. "C" style quick change shield system. Built-in Sun Shield.
SECURITYDOT approved quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State-of-the-art multi-density EPS.
VENTILATIONFully adjustable, multi-port, dynamic, flow-through ventilation with ported EPS to keep you cool.
The LS2 Assault III Warrior Krome combines bold gloss black and Krome silver graphics with the everyday performance needed for city streets and highway riding.
Its aerodynamic Kinetic Polymer Alloy shell is paired with multi density EPS for dependable protection, while a large upper air intake and channelled EPS promote steady airflow. The wide vision face shield provides a clear view of the road and includes a Pinlock 70 MaxVision insert to help prevent fogging. An internal sunshield offers convenient glare protection when conditions change.
Color matched vent panels complement the detailed Warrior graphic. Inside, the removable and breathable liner is designed for lasting comfort and easy cleaning.
Safety and Construction
Meets DOT FMVSS 218 and ECE 22.06 safety standards
Kinetic Polymer Alloy shell construction
Multi density EPS impact liner
Emergency release system
Reinforced chin strap
Micrometric buckle
Approximate weight of 1600 grams plus or minus 50 grams
Three shell sizes for a more proportional fit
Shield and Visibility
Wide vision face shield
Scratch resistant and UV resistant shield treatment
Quick release shield system
Pinlock 70 MaxVision insert included
Internal sunshield with an easy remove mechanism
Double injection shield seal
Shield button lock
Comfort and Ventilation
Removable, washable, and breathable comfort liner
Hypoallergenic and antibacterial interior
Adjustable top and chin vents
Rear exhaust ports
Channelled EPS for improved airflow
Breath deflector
Magnetic chin curtain
Included
Elastic helmet carrying bag
Pinlock 70 MaxVision insert
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Stream Shield for LS2, Clear Optically correct, scratch and fog resistant dual lens, fully adjustable.It is treated to resist fog.Fits Rapid and Stream helmets
LS2 assaults the competition with a class-leading full-face motorcycle helmet.
The LS2 Helmets Assault continues the LS2 tradition of innovative design and performance features that make riding a motorcycle the most pleasurable experience in life. The aerodynamic shell is made from LS2's industry-leading Kinetic Polymer Alloy (KPA). This proprietary material uses nanotechnology to blend microscopic particles of aramid fibers into a high-end polymer. This material is absolute state-of-the-art in energy management materials, offering a bit of built-in flexibility to disperse energy, the penetration resistance of high-end fiber products, and a lightweight shell.
The multi-density EPS again uses the latest in LS2 technology to work in conjunction with the KPA shell for optimal energy management. The eye port is wide, allowing for superior peripheral vision. The face shield uses optically correct Class A polycarbonate and comes "Pinlock Max ready," for the ultimate in fog-resistant technology (Pinlock insert is sold separately). The Assault includes LS2's Twin-Shield System built-in drop-down sunshield.
Large, adjustable ports on the chin bar and at the top of the helmet work in conjunction with the rear spoiler and side venturis to offer adjustable, dynamic flow-through ventilation. The vents are ported through the EPS to allow optimum comfort for the rider. The comfort padding uses a technical fabric the wicks moisture and dries quickly, keeping the rider cooler and more comfortable on long, hot days. The liner incorporates our Emergency Release System, allowing emergency response teams to more easily remove the helmet if ever needed. The full-metal buckle on the DOT-approved quick-release chin strap makes getting the helmet on and off a breeze.
With performance features and the latest in technology, the LS2 Helmets Assault is taking it to the competition, and offer you, the rider, a state-of-the-art helmet that exceeds expectations. Designed for easy installation of the LS2 LinkIn RidePal III by SENA Bluetooth system (sold separately).
Intermediate Oval Fit.
Two shell sizes for an optimum fit.
Kinetic Polymer Alloy (KPA) shell for ultimate energy management.
Built-in drop-down Sun Shield.
DOT approved metal buckle quick-release chin strap.
Designed for easy installation of the LS2 LinkIn RidePal III by SENA Bluetooth system (sold separately).
Meets or exceeds DOT FMVSS 218 and ECE 22.05 certification.
Note: Helmet ships with a Clear face shield, all other types sold separately.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
KwikFit® cheekpads allow easy on and off of the most common styles of eye glasses.
Easy-use Flip-up Chin Bar – A single lever release allows the chin bar to be raised or lowered with either hand.
Communication System Speaker Pockets
Removable Block Off Plates: Block off plates included for use when visor is not on helmet
Weight: 1780g (Medium)
DOT FMVSS No. 218 Certified
5 Year Warranty
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Auto Grill Badge Amer WarriorsManufacturer Part Number: MD6128Eagle Emblems MD6128 Car Grill Badge-American Warriors (3-1/4")The badge is part of the Honor Badge Collector Series. Decorate your car, truck or home with this high quality emblem. These products are prized not only by our Wounded Warriors, but also by the families, and supporters of our Military. A perfect gift for any occasion.
Auto Grill Badge Fire Dept Eagle Emblems MD6120 Car Grill Badge-Fire Dept (3")Fire Department Automobile Grill Badge: Show your support for our Firefighters who risk their lives for our safety with this auto grill badge! The badge is part of the Honor Badge Collector Series. Decorate your car, truck or home with this high quality emblem. These products are prized not only by Fire Department members, but also by the families, and supporters of our firefighters. A perfect gift for any occasion. Manufacturer Part Number: MD6120.
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Gloss Black Frames
Fits Over Most Prescription Glasses
Smoke Lenses with Matching Side Lenses
5.5" Wide X 1.5" High X .25" Deep
OVERVIEWYour bike is part of your everyday life, your gear should be too. The Axle Shoe by Highway 21 ™ is a legit riding shoe that thinks it's an every day sneaker. Reinforced toe & heel boxes, dual ankle protectors, crush resistant sole with composite shank, and topped off with a black textile upper means that it seamlessly slides from riding to living, just like you do.
Tech SpecsCrush resistant composite shankCrush resistant soleDual density ankle protectors on lateral and medial sidesOil resistant soleReinforced toe and heel box provides support and impact protectionRemovable and replaceable insolesUnisex sizing
Add personality to your gear with the AY YO WTF Patch. This embroidered saying patch gives motorcycle vests, jackets, denim, hats, bags and other suitable items a bold, easy-to-see finishing touch.
Detailed embroidered design with a clean, finished edge
Suitable for sewing onto leather, denim and other sturdy materials
A simple way to personalize existing riding gear
Professional Patch Sewing at Eagle LeatherFor the most secure attachment—especially on leather—we recommend sewing. Eagle Leather usually has an onsite seamstress who can sew patches while you wait, subject to availability and the day’s workload.Application note: Do not apply direct heat to leather or nylon. For compatible fabrics, follow the patch manufacturer’s instructions and test the material first.
* The perfect storage solution.* Works on any U.S. license plate bracket and works with any Harley- Davidson® windshield bag or any bag with a 1" wide spaced bag bracket attached to the bag!
Description
The LS2 Bagger Helmet starts with an ultra-lightweight fiberglass shell. LS2 adds a removable, washable comfort liner, so you can keep your lid as fresh as new. Also included is a zip-off neck skirt that will keep you warmer on cool days and can be removed when the sun is shining. The neck skirt has pockets for speakers from your MP3 player, and a hidden pocket around the neck to hide any wires. Rounding out the list is a shorter removable, 3-snap peak to shade your eyes.
Features:
HPFC (High Performance Fiberglass Composite) shell
2 shell sizes (XS-MD and LG-2XL)
Quick release strap
Shorter removable 3-snap peak
Zip-off neck skirt to keep you warm when the temps drop
DOT approved
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Convertible warmth that tucks in and stays put. The ZANheadgear® Balaclava with Neck Gaiter blends a stretch balaclava with a fleece Motley Tube® and a tailored chest/shoulder panel to seal out wind, snow, and dust on cold rides. Pull it down off your head or face without pinching—the convertible design keeps you comfortable under a helmet or on its own.
The soft fleece neck gaiter adds extra insulation where you lose heat fastest, while the low-profile chest/shoulder coverage lays flat so it tucks cleanly into your jacket or layers.
Product Highlights
Convertible Design: Remove from head/face while wearing for quick comfort adjustments
Added Warmth: Fleece Motley Tube® neck gaiter + tailored chest/shoulder panel block drafts
Helmet Friendly: Slim fit works under helmets without bulk
Protection: Helps guard against wind, snow, and dust
Materials: Balaclava: 88% Polyester / 12% Spandex; Fleece: 100% Polyester
Fit: One size fits most
Color: Black
Seal the collar, keep the heat—ride through winter in comfort.
ZANheadgear Nylon Balaclava: Your Essential Companion for Every Adventure
Discover the perfect blend of protection and comfort with the ZANheadgear Nylon Balaclava, crafted for the enthusiasts of outdoor adventure and motorcycle thrill. This balaclava is designed not just as a piece of equipment, but as a testament to the passion for exploration and the relentless pursuit of adventure.
Product Features:
Durable and Comfortable: Made from high-quality stretch nylon fabric, our balaclava provides a snug yet comfortable fit under any helmet. Its non-bulky design ensures ease of movement while offering effective protection in all seasons.
Versatile Protection: Ideal for motorcycle riding, skiing, or any outdoor activity, this balaclava shields you from the elements, effectively covering you against wind, dust, and environmental challenges.
Lightweight Design: Remarkably light, it adds no extra burden, making it perfect for your adventurous lifestyle.
Easy Care and Storage: Fully machine washable and easy to fold, it's a practical addition to your gear, ready for your next adventure.
Technical Details:
Material: 97% Polyester, 3% Spandex
Color: Solid Black
Size: One size fits most
Manufacturer: Zanheadgear
Additional Information:
Warranty & Support: Comes with a comprehensive warranty and support. For more details, please refer to the warranty information provided.
In the Box: Each package contains one ZANheadgear Nylon Balaclava.
Step into your next adventure with the ZANheadgear Nylon Balaclava, a symbol of our dedication to high-quality, performance-driven headwear. It's more than just an accessory; it's a necessity for those who live for the thrill of exploration. Gear up and face the elements with confidence and style.
3-IN-1 Bandanna Sportflex® UPF50+ Series Midnight Skull
Experience the ultimate in versatility, comfort, and style with the ZANheadgear® SportFlex™ Series 3-in-1 Bandanna. Meticulously designed for the active individual, this bandanna is a game-changer for anyone who loves the outdoors or is always on the go.
Key Features:
Versatile Use: Can be worn in three different styles, providing flexibility whether you're on a bike, hitting the slopes, or simply out on a sunny day.
Secure Fit: Features a reliable hook and loop closure on the ends, ensuring a secure fit in any situation.
Helmet Compatibility: Fits comfortably underneath helmets, making it perfect for motorcyclists, cyclists, and winter sports enthusiasts.
Face and Neck Coverage: Offers full coverage of the face and neck, protecting you from the elements.
Superior Fabric Quality: Made with 87% Polyester and 13% Elastane, the fabric is brushed for ultimate softness and a luxurious feel.
4-Way Stretch: The material stretches in all directions, allowing for a customizable fit that adapts to any head shape.
UV Protection: With 50+ UV Protection, it shields you from harmful ultraviolet rays, making it ideal for sunny days.
3-IN-1 Bandanna Sportflex® UPF50+ Series Black & Orange Classic Bandana
Embrace the seamless blend of style and functionality with the ZANheadgear® SportFlex™ Series 3-in-1 Bandanna. Designed for the dynamic and active individual, this bandanna is the epitome of versatility and comfort, making it an essential accessory for a range of outdoor activities.
Key Features:
Versatile Wearing Options: Easily transitions into three distinct styles, catering to your needs whether you’re biking, skiing, or simply enjoying a day outdoors.
Secure and Comfortable Fit: Equipped with a reliable hook and loop closure at the ends, this bandanna stays securely in place in any setting.
Helmet Friendly: Designed to fit comfortably under helmets, it’s an ideal choice for motorcyclists, bikers, and winter sports enthusiasts.
Full Face and Neck Coverage: Provides ample coverage for both the face and neck, offering protection against the elements.
High-Quality Fabric: Constructed with a mix of 87% Polyester and 13% Elastane, the fabric is brushed for unmatched softness and offers a 4-way stretch for a custom fit.
UV Protection: Boasting 50+ UV Protection, it’s a perfect companion for sunny days, safeguarding you from harmful UV rays.
Material Composition: Made with durable and stretchy materials, ensuring long-lasting use and comfort.
Give your Scorpion Covert X helmet a distinctive custom look with this matte black bandana style face mask. It is shaped as a direct replacement accessory and uses the helmet's magnetic attachment system for fast installation and removal.
Features
Designed for Scorpion Covert X helmets
Matte black bandana inspired profile
Neodymium magnet attachment system
Installs and removes without tools
Useful as a replacement or style change
Fitment note
This face mask fits the Scorpion Covert X only. It does not fit the original Covert or Covert 2 helmet. Helmet is not included.California Proposition 65 notice: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Visit www.p65warnings.ca.gov for more information.
The ZANheadgear® SportFlex™ Series provides comfort and warmth. We've taken our tried and true bandana with hook & loop on ends to securely close- and added our best selling fabrication. Fits comfortably underneath helmets or alone while providing coverage of the face and neck. Fabric is brushed for ultimate softness and has a 4 way stretch for customizable fit. 50+ UV Protection. Materials: 87% Polyester, 13% Elastane.
The ZANheadgear® SportFlex™ Series provides comfort and warmth. We've taken our tried and true bandana with hook & loop on ends to securely close- and added our best selling fabrication. Fits comfortably underneath helmets or alone while providing coverage of the face and neck. Fabric is brushed for ultimate softness and has a 4 way stretch for customizable fit. 50+ UV Protection. Materials: 87% Polyester, 13% Elastane.
Base Layer Pants is a technical riding layer designed to improve moisture management, comfort, and freedom of movement beneath motorcycle gear.Lightweight Base Layer PantsPRODUCT DETAILSHigh-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)Why riders choose it
Moisture-moving fabric helps manage perspiration
Flat seams and stretch construction help reduce bunching
Close, non-compression fit supports unrestricted movement
FLY base-layer pants size chart
Size
Waist
Inseam
X-Small
28.5–30 in.
29 in.
Small
30.5–32 in.
30 in.
Medium
32.5–34 in.
31 in.
Large
34.5–36 in.
32 in.
X-Large
36.5–38 in.
32.5 in.
2X-Large
38.5–40 in.
32.5 in.
Fit note: Base layers should fit close and smooth without compression or restricted movement.Rider-informed FAQsHow should a base layer fit?Choose a close, smooth fit without compression or restricted movement. Excess fabric can bunch beneath armor.Is it only for cold weather?No. Moisture management can improve comfort across seasons; insulation depends on the full layering system and riding conditions.
Base Layer Top is motorcycle-specific outerwear designed to balance abrasion coverage, rider comfort, and practical weather management. Its adjustability helps keep protective components positioned while accommodating the layers appropriate for the ride.Lightweight Base Layer Top
PRODUCT DETAILS:-High-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)Why riders choose it
Motorcycle-specific cut supports comfort in the riding position
Adjustment points help refine fit and keep armor positioned
Purpose-built materials balance protection, airflow, and weather coverage
FLY men’s jacket size chart
Size
Chest
Arm
Small
34–35 in.
31–32 in.
Medium
36–38 in.
32–33 in.
Large
40–42 in.
33–34 in.
X-Large
44–46 in.
34–35 in.
2X-Large
48–50 in.
37 in.
3X-Large
52–54 in.
37 in.
4X-Large
56–58 in.
37 in.
How to measure: Measure chest around the fullest part under the arms. Measure arm from the center back of the neck, over the shoulder and elbow, to the wrist. Measure over the layers you expect to wear.Rider-informed FAQsHow should this jacket fit?Riders generally get the best result from a close, comfortable fit that keeps the shoulder and elbow armor centered without restricting reach. Measure over the layers you expect to wear.Is it suitable for every season?Its useful temperature range depends on the installed liner, vents, and base layers. Match the setup to the forecast and carry dedicated rain protection for sustained severe weather unless the specifications explicitly state otherwise.Can the back protection be upgraded?Where the specifications list a removable PE back pad, it is designed to be replaceable with compatible upgraded armor; confirm the protector size before ordering.
Features:
Unisex chap in Drum Dyed Cowhide 1.5mm
Silver Hardware
Lined to below the knee
Reinforced stitching to prevent fraying
Chap extender for adjustment
We only use the highest quality Lithium-ion batteries to ensure long lasting power and battery life. Our batteries are designed to power your Mobile Warming product for hours ensuring you stay warm and comfortable. This Charger is only compatible with Mobile Warming 7.4 heated Jackets and Vests. Charger is compatible with only Mobile Warming 12volt Dual Power Batteries or 12volt Lithium-ion Batteries .
Specifications:
Output: 12.6v, 1.6A
Input : AC 100v-240v
The ZANheadgear® SportFlex™ Series provides comfort and warmth. We've added functional reflective tape for visibility and safety on all of your adventures. Flat seams in order to fit comfortably underneath helmets or alone while providing coverage of the head and ears. Fabric is brushed for ultimate softness and has a 4 way stretch for customizable fit. 50+ UV Protection. Materials: 87% Polyester, 13% Elastane.
Description
All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look.
Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference.
Features:
Crazy cool "pink/purple" graphics
ALL beanie helmets now come with quick release straps
Smallest DOT shell size ever made
Lightest helmet ever made
Meets or exceeds D.O.T. FMVSS No.218 standards
Sits low on your head
Never have mushroom head again
Made of Fiberglass
Designed in Canada Made in China
Only use water to clean our helmets
Weight: About 1lb / 500g
FMVSS 571.218 (DOT) certified
Small and lightweight
Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break
Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit
Our strong ABS shell combined with a dense foam
Easy exchanges
If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size
HELMET SIZING CHART
SIZE
INCHES
2X-Small
20.00"-20.50"
X-Small
20.75"-21.25"
Small
21.50"-22.00"
Medium
22.25"-22.75"
Large
23.00"-23.50"
X-Large
23.75"-24.25"
2X-Large
24.50"-25.00"
Description
All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look.
Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference.
Features:
Crazy cool "pink/purple" graphics
ALL beanie helmets now come with quick release straps
Smallest DOT shell size ever made
Lightest helmet ever made
Meets or exceeds D.O.T. FMVSS No.218 standards
Sits low on your head
Never have mushroom head again
Made of Fiberglass
Designed in Canada Made in China
Only use water to clean our helmets
Weight: About 1lb / 500g
FMVSS 571.218 (DOT) certified
Small and lightweight
Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break
Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit
Our strong ABS shell combined with a dense foam
Easy exchanges
If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size
HELMET SIZING CHART
SIZE
INCHES
2X-Small
20.00"-20.50"
X-Small
20.75"-21.25"
Small
21.50"-22.00"
Medium
22.25"-22.75"
Large
23.00"-23.50"
X-Large
23.75"-24.25"
2X-Large
24.50"-25.00"
Description
All of our motorcycle helmets are FMVSS 571.218 (DOT) certified. Our "Beanie" style helmet is a bestseller in Canada and the United States for a good reason! It offers the classic style we all know and with comfort for those long trips. Our half helmets are some of the smallest and lightest available weighing in at around 1 pound (0.5 kg)! No more sore tired neck or "mushroom head" look.
Please follow our sizing chart to ensure a correct fit. Measure from above your eyebrows around to the back of your head and back then choose the size that most closely matches your head circumference.
Features:
WCL Smallest and Lightest D.O.T. Helmet in the world
Hard shell to prevent object penetration during impact
EPS foam to reduce energy transfer to the head
Comfort Liner
Y-style Chinstrap to secure it to your head
Quick Release fastening system makes it easy to put on and take off
Certification: DOT
Note: this helmet runs large for most people
Weight: About 1lb / 500g
FMVSS 571.218 (DOT) certified
Small and lightweight
Red quick release that holds the helmet securely to your head but makes it a breeze to take off when you’re done riding, or just want a break
Our helmets have a break in period and will mold to your head after the first few rides for a long lasting comfortable fit
Our strong ABS shell combined with a dense foam
Easy exchanges
If your helmet isn’t fitting quite how you’d like just send us a message to exchange it for a different size
HELMET SIZING CHART
SIZE
INCHES
2X-Small
20.00"-20.50"
X-Small
20.75"-21.25"
Small
21.50"-22.00"
Medium
22.25"-22.75"
Large
23.00"-23.50"
X-Large
23.75"-24.25"
2X-Large
24.50"-25.00"
The ZANheadgear® super soft SportFlex™ Series provides comfort and warmth. Flat seams in order to fit comfortably underneath helmets or alone while providing coverage of the head and ears. Fabric is brushed for ultimate softness and has a 4 way stretch for customizable fit. 50+ UV Protection. Patriot design. Materials: 87% Polyester, 13% Elastane.
The ZANheadgear® Windproof bonded fabrication provides comfort and warmth. Flat seams in order to fit comfortably underneath helmets or alone while providing coverage of the head and ears. Fleece sits against ears for comfort. Fits is a little larger to allow for more sizes and ability to fold hem for double layered warmth when needed. 50+ UV protection. Materials: 100% Polyester.
