Real Gear for Real Riders. Protection, Comfort, and Style You Can Actually Feel.

Patches

300 products

  • Christian Biker Rocker Patch 4 Inch x 1 Inch: Description
All patches feature a heat- sealed backing

    Hot Leathers Christian Biker Rocker Patch 4 Inch x 1 Inch

    5 in stock

    Description All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily. Patch Sewing Instructions: Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start. Identify where you want the patch and outline the area with tailor’s chalk Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment Position your inside hand so it is resting flat between the lining and outlines area Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot Finally restitch the garments lining and your all set Patch Iron-on Instructions: Preheat your iron to 325-335 degrees. Do Not Use Steam Press the area where you want your patch to be for 25 seconds Position the patch on the garment so that it is positioned where you would like it to be Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds The iron should never come into direct contact with the patch Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute Turn the garment right side in once more, use your clean lightweight cloth to cover the patch Iron the edges of the patch through the cloth to ensure they are thoroughly sealed Let the garment cool completely before wearing

    5 in stock

    $5.95

  • Wild Dream Catcher Patch: Heat-sealed backing for easy iron-on application

    Hot Leathers Wild Dream Catcher Patch

    4 in stock

    Heat-sealed backing for easy iron-on application.

    4 in stock

    $5.95

  • Arrr Matey Patch: Description
All patches feature a heat- sealed backing

    Hot Leathers Arrr Matey Patch

    3 in stock

    Description All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily. Patch Sewing Instructions: Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start. Identify where you want the patch and outline the area with tailor’s chalk Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment Position your inside hand so it is resting flat between the lining and outlines area Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot Finally restitch the garments lining and your all set Patch Iron-on Instructions: Preheat your iron to 325-335 degrees. Do Not Use Steam Press the area where you want your patch to be for 25 seconds Position the patch on the garment so that it is positioned where you would like it to be Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds The iron should never come into direct contact with the patch Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute Turn the garment right side in once more, use your clean lightweight cloth to cover the patch Iron the edges of the patch through the cloth to ensure they are thoroughly sealed Let the garment cool completely before wearing

    3 in stock

    $7.95

  • Best Seller I'm a Ray of Fing Sunshine Patch 4 Inch: Description
Leathers I'm A Ray of Sunshine Embroidered 4" x 2" Patch A 4"W x 2"H emb

    Hot Leathers I'm a Ray of Fing Sunshine Patch 4 Inch

    2 in stock

    Description Leathers I'm A Ray of Sunshine Embroidered 4" x 2" Patch A 4"W x 2"H embroidered patch that reads: "I'm A Ray Of Sunshine" in white lettering on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original Leathers artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your Leathers gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!

    2 in stock

    $5.95

  • Last stock! Rubber Duck Patch: Rubber Duck Patch

    Hot Leathers Rubber Duck Patch

    1 in stock

    Rubber Duck Patch

    1 in stock

    $5.95

  • I Oil My Guns Patch: 4 inches x 2 inch
Heat sealed backing, recommend to sew on leather

    Hot Leathers I Oil My Guns Patch

    2 in stock

    4 inches x 2 inch Heat sealed backing, recommend to sew on leather

    2 in stock

    $5.95

  • Last stock! Trump Duck Patch: <p>100% Brand New and High Quality ! These ducks will squeak when you squeeze them

    Hot Leathers Trump Duck Patch

    1 in stock

    <p>100% Brand New and High Quality ! These ducks will squeak when you squeeze them. Kids just love to play with them in the bathtub. Great for decorations, party favours or give away.This duck perfectly captures the caricaturized features of America's 45th President.A unique memento of one of</p>

    1 in stock

    $5.95

  • Machine Gun Bunny Patch

    Ivamis Machine Gun Bunny Patch

    5 in stock

    5 in stock

    $6.99

  • Sugar Skull Butterfly Patch

    Ivamis Sugar Skull Butterfly Patch

    2 in stock

    2 in stock

    $6.99

  • Duck on a Moped Patch

    Ivamis Duck on a Moped Patch

    3 in stock

    3 in stock

    $4.99

  • Keep On Truckin Patch

    Ivamis Keep On Truckin Patch

    4 in stock

    4 in stock

    $4.99

  • Silliest Goose on The Loose Patch

    5 in stock

    $3.99

You have seen 300 out of 300 products

Patches - Gear for the Ride

Patches from Eagle Leather is selected for riders who want real performance without the fluff. We balance protection, comfort, and style so you can focus on the road, not your gear. Everything here is road-tested, rider-approved, and ready to go.

Why This Collection Matters

Great gear does more than look good—it earns your trust. We prioritize fit, durability, and function so you get confidence at a stoplight, stability in the rain, and comfort on long days in the saddle. Materials, stitching, hardware, and features are picked with real riding in mind.

How to Choose the Right Option

Start with your ride style and weather. Daily commuter? Look for quick on/off and low-profile comfort. Touring or weekend trips? Aim for features that fight fatigue and changing conditions. If you’re customizing, match components that complement your bike and how you ride.

Trusted by Riders Since 1995

We’ve outfitted Pacific Northwest riders for decades. That means honest guidance, no pressure, and gear that stands up to real-world miles. If you have questions, call or stop by—our crew rides, too.

Next up: Pair this collection with new arrivalsmotorcycle accessoriesshop all to round out your setup.

Ride protected, ride comfortable, and enjoy the miles. Gear for the Ride—only at Eagle Leather.

Frequently Asked Questions About Patches

How do I pick the right gear for my riding?

Match protection/materials...

What safety ratings should I look for?

DOT/ECE, CE Level 1/2 armor...

How should gear fit for protection?

Snug so armor stays put...

Weather and season tips?

Vents/mesh for heat, waterproof layers for rain...

Eagle Leather logo with a gray-winged eagle and a flaming yellow and red body, featuring the text 'Eagle Leather' in red and gold, and the tagline 'Motorcycle Gear Specialist' below.

© 2025 Eagle Leather, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account