Experts always takes care of their tools because they know their tools take care of them. Danner boots are no exception, and Danner Boot Dressing is the key to maintaining boot quality. This premium dressing is formulated to keep leather* of any color from drying and cracking and should be used to re-condition boots after hard use. Boot Dressing Compound is water-resistant and allows for breathability. This is especially important to GORE-TEX boots, as the waterproof membrane needs to be able to breathe through the leather to work most efficiently. *For use on full-grain leather only. For nubuck, suede or rough-out leather, try our Waterproofing Spray.
The ZANheadgear® SportFlex™ Series Motley Tube® is a versatile all-in-one headgear constructed of polyester elastane and brushed treatment. This product is heavier than our standard Motley Tube, yet lighter than our Fleece Lined option, with a softness & comfort that surpasses any competitor. Perfect to wear as a balaclava, face mask, neck warmer, scarf, beanie, and ear warmer to keep warm & protected in versatile climates. Lightweight and machine washable, one size fits most adults. 50+ UV Protection. Black & White Flag. Materials: 87% Polyester, 13% Elastane.
The ZANheadgear® SportFlex® Series Motley Tube® is a versatile all-in-one headgear constructed of polyester elastane and brushed treatment. This product is heavier than our standard Motley Tube, yet lighter than our Fleece Lined option, with a softness & comfort that surpasses any competitor. Perfect to wear as a balaclava, face mask, neck warmer, scarf, beanie, and ear warmer to keep warm & protected in versatile climates. Lightweight and machine washable, one size fits most adults. 50+ UV Protection. Materials: 87% Polyester, 13% Elastane.
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Ladies Studded Shoulder Bag Bk
1.2 - 1.3 Premium Leather
Adjustable Shoulder Strap with Clasps
Multi Pocket Inside for Smaller Items
Zippered Lock Pocket with Magnetic Clasp
Quick Access Back Zippered Pocket
Icon D30 Back Protector Insert
D3O may be a household name nowadays, but having spawned so many copycats you know the original was something special. Derived from non-Newtonian tech, D3O is soft and pliable at rest, but becomes rigid when force is introduced. It's the best of both worlds. Ultimate comfort while its sitting on your back, rigid armor if you take a spill. You get more impact protection per square inch than pretty much any other kind of armor, all while minimizing bulk.
The Icon D3O Back Protector will fit any jacket that came with a Dual Density Back Pad. The shape is a little different, but it'll still fit.
Features:
CE Level 1
Ultimate comfort and optimal noise reduction.
How to use:
Gently pull your ear up and out to open ear drum and then place the ear plugs into ear canal.
Thoroughly clean and dry ear plugs between uses.
In the box:
1 set of large size ear plugs with acoustic filter installed
1 set small size ear plugs with acoustic filter installed
aluminum carry case (with attached carabineer)
