Description:-FirstGear's Gen4 Heated Pant Liner warms you in seconds, yet are designed to feel like part of you. Form-fitting, for optimum heat transfer to the body. The garment is durable, hand washable, and extremely lightweight. This version uses Gelanots, a breathable and waterproof stretch fabric in the front to block the wind, as well as a wicking effect when wearing jeans or other porous pants. The new "soft heat" heating panels have soft and flexible carbon shape for maximum heat transfer. All this efficiency means less insulation and power is required to deliver and retain the desired heat. The use of stretch Gelanots in front, works as a wind stop and the anti-bacterial, moisture management Spandex fabric on the rear side prevents odors. Both materials contribute to allowing full range of movement for any activity and fits easily under your outer garments. Heated zones cover thigh, knee and upper butt with 48-Watts of heat. Only the best goes into the Heated Pants Liners: High-tech, wicking, stretch fabric construction with different cuts for men and women, YKK zippers, carbon "soft heat" heating element, connectors and wires rated to -40 degreesF for durability and longevity.Features:-
48-Watts of heat using soft-heat pure science heating method.
Stretch Gelanots in front as a wind stop.
Anti-bacterial treated fabric minimizes odors and manages perspiration with moisture-wicking properties.
Integrated sock plugs stow in their own zippered pockets when not in use.
Dual zone heating for use with either a Single or Dual Heat-trollerT. Remote Heat-troller pocket.
Packs it into its included zippered pouch.
3.5-Amps draw at 13.8V. 4.0-Ohms.
One-year manufacturer's warranty.
MEN'S GEN 4 HEATED PANT'S LINER SIZE CHART
SIZE
WAIST (IN) (CM)
SMALL
28-30 (71-79)
MEDIUM
32-34 (81-89)
LARGE
36-38 (91-99)
X-LARGE
40-42 (101-109)
2X-LARGE
44-46 (111-118)
Full Grain Premium 2.2mm Cowhide Waterproof Leather
Anti Slip, Oil Resistant Cement Outsole
Side Zipper Entry W/ Pull Tight Lacing
Smart Mask Climate Control Insole w/Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
The perfect crossover jacket with a bold look that you'll want to wear on and off the bike.
Features:
Lightweight twill body with leather sleeves
Club style with banded snap collar
Snapped wrist closure with gussets
Center front zipper
Single zippered chest pocket
Two zippered slash pockets
Two concealed carry pockets with tapered holsters
Black reflective piping along arm, back and shoulder seams
Mesh lining
YKK zippers
Pockets for CE Level 2 shoulder, elbow and back armor (sold separately)
Nappa LeatherNot only has the Cafe Racer glove captured that classic “rocker” style, it’s impressive list of ride-specific features also captures the elusive sweet spot between protection and comfort.Features:
Soft Nappa leather outer construction
Drum dyed leather padded palm
Classic retro styling
Articulated Full Flex™ panel for mobility on cuff and fingers
YKK® zipper entry with gusset
Pre-Curved ride friendly design
High density padding on knuckle and thumb area for protection
Perforation holes around fingers for ventilation
Embroidered logo application
Comfort elastic inside cuff
CAFE RACER GLOVE SIZING CHART
SIZE:
HAND (IN):
Small
3”
Medium
3.5”
Large
4”
X-Large
4.5”
2X-Large
5”
3X-Large
5.5”
CONVERT TO CENTIMETERS
Lightweight Base Layer PantsPRODUCT DETAILSHigh-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)
Raised on the rain-soaked streets of Portland, the ICON design team knows a few things about wet weather riding. The CE-certified PDX3, named after our home city, combines the necessity of a fully-taped waterproof/breathable shell with premium D3O impact protectors in the elbows, shoulders, and back. In addition, the pit zips provide additional venting ability while the hood rolls up for riding.
FITICON® Relaxed FitMATERIALHycor™ Waterproof/Breathable ChassisInternal 300D Polyester ReinforcementsPROTECTIONJacket Tested and Certified According to EN 17092-4:2020 class AD30® Removable Viper Back; Elbow and Shoulder T5 Impact Protectors - EN 1621-2:2014 / EN 1621-1:2012FEATURESRemovable Insulated Vest Liner, Oversized Pit Vents, Roll & Stow Hood
FIT
RELAXED
Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over another garment.
WATERPROOFING
GOOD
Hycor™ chassis provides optimum weather coverage
CONDITIONS
COLD to MILD
Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.
JACKET SIZING INFORMATION
There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.
Measurement
Chest
Sleeves
Attack
Tailored Body
Precurved arms
Sport
Straight Body
Semi-precurved Arms
Relaxed
Straight Body
Straight Arms
CHEST MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.
SLEEVE MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.
WOMENS JACKET SIZING CHART
Size
Chest Inches
Sleeve Inches
UK Conversion
Europe Conversion
X-Small
33
29
5
40
Small
35
29.5
7
42
Medium
37
30
9
44
Large
39
30.5
11
46
X-Large
41
31
13
48
2X-Large
43
31.5
15
50
3X-Large
45
32
17
52
PORTLAND
STOWABLE HOOD
Hood rolls up for easy storage
WATERPROOFING/BREATHABLE
Hycor™ chassis provides optimum weather coverage
D3O® IMPACT PROTECTOR PACKAGE
SHOULDERS, ELBOWS, & BACK
Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.
CARE INSTRUCTIONS
General CareICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.
Pre-CleaningIt is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.
CleaningInsulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!
DryingInsulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.
RELIABLY RUGGED
Built in the USA with a dedication to quality that goes back to 1932, the Bull Run is a utilitarian work boot with a timeless design that stays in style when you punch out. The full-grain leather upper is the perfect blend of strong and soft. Combine that with the sturdy Danner Wedge outsole and you get all-day comfort that lasts.
Full-Grain, Oiled Leather UpperAfter incorporating oil into the tanning process, we take the oiled, full-grain leather and put it through a series of rigorous testing to ensure its strength and durability. This form of leather is more resistant to water and other liquid damage and requires less maintenance over time.
Unlined Leather UpperLighter weight with cool comfort in warmer temperatures, our unlined leather boots will mold perfectly to your foot.
Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.
Oil and Slip ResistantOur oil-and-slip resistant outsoles have been certified to meet OSHA safety standards.
Removable OrthoLite FootbedThree layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood. Not recommended for daily use on asphalt.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Description
Flag Bling Full Cut Short Sleeve Ladies Black T-Shirt. This ladies full length T-Shirt in the color black Features: a rhinestone bling American flag and screen printed text reading 'RIDE FOREVER' and 'FOREVER FREE'
Features:
Made of 100% Cotton
Full Cut
Bling Transfer and Screen-print Combo
Exclusive Artwork
Machine Wash Cold with Like Colors, Dry Low Heat, Iron Inside out if needed
Proudly Printed in the USA
SHORT SLEEVE MEASUREMENTS IN INCHES
LADIES RIDE FOREVER FREE SHIRT SIZING CHART
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOU-LDER TO HIP
25
25
26
27
28
DAYRIDE JACKETHitena™ Reinforced Rock Tex™Features:• Combined Hitena™, Rock Tex™ 600, and Free Air™ mesh hybrid outer shell for maximum impact resistance and mesh cooling where you need it• Full Flex™ system: precision tailored fusion of pliable mesh (underarm/shoulder/back) and articulated back expansion panels, drastically augmenting mobility• Externally accessible CE approved armorin shoulders and elbows• Removable spine armor• YKK® zippers throughout• Sure Fit™ 6-point custom adjustment system• Snap loops for attaching jacket to belt• 8” rear zipper for pant attachment• Removable insulated vest liner• Reflective sleeve panels & back stripe
Description
This official T-Shirt displays a screen printed image of a variety of pistols and rifles on a black tee and states "FREEDOM"
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
FREEDOM GUNS SHIRT SIZING CHART
SIZES
LENTH
WIDTH
MEDIUM
29
20
LARGE
30
32
X-LARGE
31
34
2X-LARGE
32
26
3X-LARGE
33
27/1/2
* Soft Milled Cowhide 1.1-1.2mm* Hip hugging curvy fit‚ gives sexy look* Extremely low rise with petite double belts in the front and added rivet decorations* Fully lined with mesh liner* The self adjusting back belt that will adjust automatically to size when the front is buckled* Ever so important but extremely rare thigh lace adjusters help customize thigh fitting. The placement of the lace keeps it out of the way while walking or sitting* Zipper buffer prevents liner from catching in the zippers* Snap boot cuffs for easy on and off and cutting to adjust length* Unfinished bottom for trimming to correct size* Heavy snaps and Original YKK zippers. Non-rusting‚ non-corroding
LOWRICE CHAPS SIZING CHART
POINT-OF MEAS-URE-MENT
X-SMALL
SMALL
MED-IUM
LARGE
X-LA-RGE
2X-LA-RGE
3X-LA-RGE
4X-LA-RGE
5X-LA-RGE
INSEAM
31 1/2
31 1/2
31 1/2
32
32
32
32 1/2
32 1/2
32 1/2
WAIST
28
30
32
34
36
38
40
42
44
THI-GH:1R-ICE
17 3/4
18 3/4
19 3/4
20 3/4
21 3/4
22 3/4
23 3/4
24 3/4
25 3/4
BOTT-OM OPE-NING
19 1/4
19 1/2
19 3/4
20
20 1/4
20 1/2
20 3/4
21
21 1/4
Description
The trendy smart case will hold your cell phone, keys, credit cards, and currency. Take this case for a quick trip to the store or a night out dancing either way you will be right in style with this chic cell phone wallet. The matching removable wrist strap features a key ring that can detach with the strap. Be hands-free by just slipping the wrist handle around your wrist.
Features:
Measures 5.25 x 3.25 x 1 inches
Fits most phones, interior sides measure 4.75 x 2.8 x 0.45 inches
Push button closure
Removable wrist strap and key ring
NOTE: Please note the price listed is for 1 individual item not the entire assortment.
PANOVISION CLASS 1 OPTICSBROADEN YOUR HORIZONNo matter what or how you ride, one factor remains constant: the need for maximum visibility. Whether racing or going on a simple ride in the mountains, the ability to make safe headchecks and see obstacles clearly is critical.The Panovision viewport in the 2016 Star offers riders additional vertical and lateral visibility over the previous Star and more traditional viewports. This allows the rider to see better in a tight or tucked position and make safer lane changes and head-checks
Eagle Flag Pin This gold Eagle lapel pin is 3-D cast from brass and plated in a bright gold finish. The Eagle is a great American patriotic and traditional symbol of power and courage. This pin is widely used by the military and law enforcement. Each includes a standard clutch back and is individually poly bagged.
Features:
Cooldanna is a head and neck tie that provides hours of cooling relief
Soak the Cooldanna in cold water for 10 minutes to activate the cooling crystals
Wear as a headband, neck tie or hair band to maximize cooling during hot days and activities
