Stay Dry, Comfortable, and in Control
The Brisk Waterproof Gloves are built for riders who refuse to let bad weather slow them down. Designed with a fully waterproof barrier, reinforced palm panels, and a weather-ready exterior, these gloves deliver dependable protection from wind, rain, and road spray.
All-Weather Grip and Protection
A waterproof yet breathable construction keeps your hands dry without trapping heat, making these gloves ideal for rain, cool temperatures, and unpredictable riding conditions. The padded knuckle zones, touchscreen fingertip, and enhanced grip material ensure comfort and control when the weather turns rough.
Key Features
Waterproof constructionKeeps hands dry in rain and wet riding conditions.
Reinforced leather palmProvides durability and stable grip on bars and controls.
Touchscreen-capable fingertipAllows phone or GPS use without removing gloves.
Padded knuckle zonesAdds impact protection in key strike areas.
Weather-resistant textile shellShields against wind and cool temperatures.
Adjustable wrist closureEnsures a secure and comfortable fit.
Why Riders Choose Them
A dependable choice for commuting, touring, and everyday rides in wet or cold weather, the Brisk Waterproof Gloves give riders the confidence to take on the elements without sacrificing grip or comfort.
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Introducing the Bronson V2 Jacket from Eagle Leather - a modern interpretation of the classic bomber jacket. With superior venting, removable insulated liner, and premium cowhide, it's perfect for hot and cold rides alike. Beyond just protection, this jacket carries an essence of history, daring spirit, and a dash of the rebel. Don't just ride; command the road.
Features:
Two holster pockets
Six vent locations
Removable insulated liner
Removable Armor (CE Level 2) in the elbows, shoulders and back
Pre-curved arms
Action Back
Dropped leather back
Stretch waist
Zipper Wrist closures
Zip closed pockets
Premium cowhide
Removable Collar barrier
Exhaust holes
YKK Zippers
Two-Year Warranty
Feature Importance:
Two Holster Pockets: Provides secure and convenient access to essential items, contributing to both safety and efficiency on your rides.
Six Vent Locations: Ensures optimal airflow and temperature control for comfortable riding in any climate.
Removable Insulated Liner: Provides adaptability for varying weather conditions, offering added warmth when needed and easy removal when it's not.
Removable Armor (CE Level 2): Protects vital areas without compromising style or comfort, and offers the flexibility of removal when you prefer.
Pre-Curved Arms: Enhances riding comfort by reducing sleeve lift when reaching for handlebars.
Action Back: Allows unrestricted movement for easier control of your motorcycle.
Dropped Leather Back: Offers additional weather protection and comfort for the lower back.
Stretch Waist: Ensures a comfortable, snug fit that keeps out the elements and enhances your riding experience.
Zipper Wrist Closures: Facilitates easy donning of gloves and provides additional ventilation when needed.
Zip Closed Pockets: Provides secure storage for your belongings, ensuring nothing falls out during your ride.
Premium Cowhide: Ensures a soft, comfortable feel while offering robust protection and durability.
Removable Collar Barrier: Shields your neck from wind and prevents collar flap when flipped up, enhancing comfort during rides.
Exhaust Holes: Located under the arms to help heat escape, reducing the chance of sweat accumulation and enhancing overall comfort.
YKK Zippers: Reliable, high-quality zippers known for their durability and smooth operation.
Two-Year Warranty: Covers workmanship and unnatural fading, demonstrating Eagle Leather's commitment to quality and customer satisfaction.
Size Chart:
Size chart note: Sleeve length is measured from the nape of the neck, to the point of the shoulder and down the arm to the wrist
Size:
Chest
Hip
Sleeve Length
Back Length
Small
44"
38"
36"
25"
Medium
46"
40"
37"
25.5"
Large
48"
42"
38"
26"
X-Large
52"
44"
39"
26"
2X-Large
54"
46"
39.5"
27"
3X-Large
56"
47"
40"
28"
4X-Large
58"
48"
40.5"
28.5"
5X-Large
60"
49"
41"
29"
Fit: The model in blue jeans is 5'8", 135lbs, wearing a size small.The model with the beard is 6'1", 280lbs, wearing a size 3XL.
If you're looking to match your chrome, the Dark Silver Iridium gives your inner shield a mirrored look, which upgrades Bell Broozer helmets nicely. Or switch out the Dark Smoke inner sun shield and the Clear shield depending on the hour. In any case, these replacement shields are scratch-resistant, have incredible clarity, and can be swapped out with no tools in under 10 seconds.
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
Make your style pop with a variety of 3-Snap Bubble Shield options.
Features:
NutraFog anti-fog, anti-scratch and UV-protected shield
Stable three-snap design
Fits the Bell Custom 500, R/T and Shorty, and most other three-snap helmets
*NutraFog anti-fog, anti-scratch and UV-protected shield*Stable three-snap design*Fits the Bell Custom 500, R/T and Shorty, and most other three-snap helmets
*NutraFog anti-fog, anti-scratch and UV-protected shield*Stable three-snap design*Fits the Bell Custom 500, R/T and Shorty, and most other three-snap helmets
Features:
Naked Buffalo Leather
Removable faux shearling collar
Polyester and satin lining
Two inside zipper pockets
Two drop down pockets
Two side hand pockets
Front closure with snaps and main zipper
2 year Warranty on Hardware
RELIABLY RUGGED
Built in the USA with a dedication to quality that goes back to 1932, the Bull Run is a utilitarian work boot with a timeless design that stays in style when you punch out. The full-grain leather upper is the perfect blend of strong and soft. Combine that with the sturdy Danner Wedge outsole and you get all-day comfort that lasts.
Full-Grain, Oiled Leather UpperAfter incorporating oil into the tanning process, we take the oiled, full-grain leather and put it through a series of rigorous testing to ensure its strength and durability. This form of leather is more resistant to water and other liquid damage and requires less maintenance over time.
Unlined Leather UpperLighter weight with cool comfort in warmer temperatures, our unlined leather boots will mold perfectly to your foot.
Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.
Oil and Slip ResistantOur oil-and-slip resistant outsoles have been certified to meet OSHA safety standards.
Removable OrthoLite FootbedThree layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood. Not recommended for daily use on asphalt.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Loyal protection for every mile. The Bulldog Guardian Bell is a rider’s talisman—hung low on the bike to ward off road “gremlins” while adding a tough, loyal bulldog motif to your build.
Crafted in the USA from lead-free fine pewter and packed in a velvet pouch, it’s gift-ready and steeped in tradition. For the full legend, have it gifted by a friend and mount it near the lowest part of the frame for that protective jingle on the road.
Product Highlights
Design: Bulldog legend/guardian bell
Material: Lead-free, fine pewter
Made in USA: Quality craftsmanship
Gift-Ready: Includes velvet pouch
Tradition: Hang low on the bike; a bell gifted by a friend is said to bring extra luck
Small bell, big bite—ring in safe miles.
Tie it down, ride worry-free. This 5-pack of 18" heavy-duty bungee cords is perfect for securing small loads to your motorcycle, ATV, truck, or boat. Durable stretch and sturdy hooks keep gear in place from garage to highway.
Product Highlights
Quantity: 5 cords
Length: 18" (approx., unstretched)
Color: Black jacket with tracer accents
Construction: Elastic latex core with braided wear-resistant outer jacket
Hooks: Metal J-hooks with wide coils for a secure hold
Use Cases: Strap down bags, tarps, coolers, tool rolls, and campsite gear
How to Use
Attach hooks to solid anchor points; avoid sharp edges.
Do not overstretch; replace cords that show cracks, frays, or damaged hooks.
Safety: Not for lifting, towing, or overhead use. Eye protection recommended when stretching.
Simple, strong, and road-ready.
TECH SPECS
•Hydraguard - Weatherproof technologyWindproof, waterproof, breathable•High-visibility reflective panels and logos for added safety•Air Induction System features large 3D mesh intake vent•CE Level 1 removable shoulder/elbow armor - conforms to EN 1621-1 standard•Removable PE back pad - Upgradable to FLY Barricade CE armor•Removable thermal liner•Rear exhaust vents•Arm volume adjusters secure armor and provide optimum fit•Hook and Loop waist adjusters for customized fit•Side expansion panel for added comfort•Belt loop attachment•8” attachment zipper connects to pant•Drop tail for added coverage•YKK® main zipper
The C10 is an all-new competitively priced full-face helmet for riders of all ages who value quality and safety, offering a lightweight superior fit thanks in part to its Advanced Polycarbonate Composite shell that was designed using advanced CAD technology. Combined with a wide-view optically-superior face shield and its improved “ACS” Advanced Channeling Ventilation system that allows full front-to-back airflow to flush heat and humidity up and out, the C10 provides a safe and comfortable ride no matter the conditions. With sizes ranging from 3XS to 2XL, the C10 delivers the same great protection for both youth and adult riders alike.
*Smoke Shield is not included.POLYCARBONATE SHELLThe Advanced Polycarbonate Shell is designed to be lightweight with a superior fit and comfort, using CAD technology.
Description
The C91 helmet will offer riders some of the best features on the market at a budget friendly price. Starting with the Advance Polycarbonate Composite Shell. It provides a lightweight helmet with a superior fit and comfort using advanced CAD technology. The chin bar operates with an easy to use the single lever and is user friendly with gloves. It also includes an internal sun shield with a manual mechanism that moves forward and back with ease. The large top vent allows airflow ventilation throughout the deep EPS channels of the helmet, keeping you cool on rides. The Super Cool top liner and cheek pad interior gives additional cooling features with its moisture-wicking anti-bacterial fabric. The C91 is also Smart HJC ready to accept the 10B or 20B Bluetooth systems (*sold separately).
Features:
SHIELD & SUN VISOR OPTIONS
Hj-17 Anti Fog Shield
Hj-v5 Sun Visor
REPLACEMENT PARTS
Chin Bar
Sun Visor
Cheek Pads
Headliner
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZW
INCHES
X-Small
53-54
6 5/8 – 6 3/4
20 7/8 – 21 1/4
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
X-Large
61-62
7 5/8 – 7 3/4
24 – 24 3/8
2X-Large
63-64
7 7/8 – 8
24 3/4 – 25 1/4
3X-Large
65-66
8 1/8 – 8 1/4
25 5/8 – 26
4X-Large
67-68
8 3/8 – 8 1/2
26 3/8 – 26 3/4
5X-Large
69-70
8 3/4 – 8 3/4
27 1/4 – 27 5/8
HJC C91 Taly Helmet
The HJC C91 modular helmet is a straight to the point helmet, the point being lightweight, super comfortable, affordable, safe, and easy to use. The modular design had gloved hands in mind with an easy to operate chin bar, drop-down sun visor, and faceshield for seamless functionality. The C91 also comes Smart HJC ready (Bluetooth sold separately) with speaker pockets for an easy install that won't rub your ears wrong. DOT approved, wrapped in an advanced polycarbonated composite shell, SuperCool Interior with a glasses groove, the C91 is a 1-2 punch that won't rub your wallet wrong, either.
Features:
DOT Approved
Advanced polycarbonated composite shell
Pinlock ready faceshield
Drop-down visor
SuperCool interior
Glasses groove
Speaker pockets for Bluetooth communication
Nappa LeatherNot only has the Cafe Racer glove captured that classic “rocker” style, it’s impressive list of ride-specific features also captures the elusive sweet spot between protection and comfort.Features:
Soft Nappa leather outer construction
Drum dyed leather padded palm
Classic retro styling
Articulated Full Flex™ panel for mobility on cuff and fingers
YKK® zipper entry with gusset
Pre-Curved ride friendly design
High density padding on knuckle and thumb area for protection
Perforation holes around fingers for ventilation
Embroidered logo application
Comfort elastic inside cuff
CAFE RACER GLOVE SIZING CHART
SIZE:
HAND (IN):
Small
3”
Medium
3.5”
Large
4”
X-Large
4.5”
2X-Large
5”
3X-Large
5.5”
CONVERT TO CENTIMETERS
Show off your favorite brand, and stay cool in the hot months, with this all new mesh riding jacket from Eagle Leather! Vibrant reds and whites make you visible, while lightweight, mesh paneling makes this jacket breathable. Armor included.
Features:
Armor included
