Biker durags have been a staple of biker culture for as long as most of us can remember.
Perfect any weather, durags are a great way to show your own personal style while keeping your helmet clean or just keeping the elements from beating down on you.
Our durags come in a great selection of vibrant colors, and are made of a soft, silky material for comfort all year.
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
EARTHTONES HEADDRESS T-SHIRT SIZING CHART
SIZE(IN)
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
CHEST
38-40
42-44
46-48
50-52
54-56
WAIST
32-34
36-38
40-42
44-46
48-50
SLEEVE - COLLAR CENTER TO WRIST
33-34
34-35
35-36
36-37
37-38
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
Colored shields feature in-molded tint technology
Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity
TECH SPECS
Injection-molded scratch- and impact-resistant polycarbonate thermoplastic construction
Plated stainless-steel snaps fasten securely to snaps on helmet brow for easy installation
Colored shields feature in-molded tint technology
Mirrored shields feature reflective technology in a variety of surface finishes to reduce glare
Every shield color and style provides 91% UV/A and 99% UV/B light resistance based on AATCC-138 test standard
Anti-fog treatment on shield interior fights moisture build-up from breathing and humidity
CARE AND MAINTENANCE
Bubble shields from the plastic industry's glory days in the '60s were an instant hit with the hip chopper crowd, and have remained a popular safe-riding essential in modern times, thanks to advancements in polycarbonate technology and mold-making. Biltwell bubble shields are a snap to install, if you start with the center snap and move outward. To clean your shield, use mild soapy water solution and a microfiber cloth to loosen bugs and road debris, then dry it with a second clean microfiber towel. Never use harsh household or petroleum-based chemicals to clean your bubble shield, especially on the inside, as they can destroy the shield's special coatings.
Progressively styled and rigorously tested, our ECE-certified helmet is a top choice for riders who demand comfort and high performance. Features include a rugged ABS outer shell, ventilated EPS safety liner, replaceable comfort liner and a clear anti-fog shield.
Technical Details
Injection-molded ABS outer shell is rugged yet lightweight—the best combination of features for a motorcycle helmet
Three-piece Expanded Polystyrene (EPS) safety liner dissipates impact loads and fortifies helmet structure for a secure fit without compromising comfort
Molded urethane chin bar pad features front and side vents for airflow
CE-certified polycarbonate shield includes anti-fog and anti-scratch treatments for safety and durability
Removable/replaceable comfort liner and cheek pads feature brushed fleece Lycra touch points to absorb and evaporate perspiration
Chin strap features brushed fleece Lycra touch points for comfort and an adjustable strap end retainer
Molded recesses inside EPS interior shell accept select aftermarket audio and communication components
Rugged shield hinge hardware with robust detents allows you to open the shield at slow speeds for increased airflow
Lane Splitter was the first Biltwell helmet engineered to meet Europe’s comprehensive motorcycle safety standards a decade ago. Today, our feature-rich helmet for high-performance riders is ECE R22.06 certified to ensure high levels of rider safety and protection.
TECH SPECs
Injection-molded ABS outer shell is lightweight and highly resistant to impacts
Aggressively styled shell features front, side, and rear ventilation to improve interior airflow, moisture dissipation, and cooling
New Dual Density expanded polystyrene (EPS) internal safety shell absorbs and dissipates impact energy without compromising comfort
Removable BioFoam spoiler on underside of chin bar reduces turbulence below the rider’s face
Molded urethane chin bar pad dissipates energy during front impact
Chin strap features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab for speedy removal
CE-certified, injection-molded polycarbonate shield features anti-fog and anti-scratch treatments for durability and safety
Rugged hinge hardware with robust detents allows you to ride with the shield open at slow speeds to increase cooling airflow
Anodized aluminum washers and stainless-steel hinge screws can be swapped with different colors and finishes to personalize the look of your helmet (hinge hardware sets available separately)
Removable/replaceable comfort liner and cheek pads are constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration
New BioFoam head form panel and ventilated polyester padding maximize airflow around your head to ensure coolness and comfort
Molded EPS ear pockets fit select aftermarket audio accessories
US DOT FMVSS No. 218 compliant / ECE R22.06 certified
⚠️ WARNING: This product can expose you to chemicals including Phthalates, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
⚠️ WARNING: This product can expose you to chemicals including Lead and Cadmium, which are known in the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
FITMENT
Please follow the instructions in our sizing chart before ordering a new helmet in the same size as your current model. To meet Europe's new, more robust standards for impact attenuation and rider safety, ECE R22.06-certified helmets may fit you more snugly than similar US DOT-compliant models. NOTE: We offer accessory cheek pads so you can fine-tune the comfort of your helmet against your cheeks and face for a perfect fit.
Description
Neoprene Material, Easy and fast to wear, Water and wind resistant, Reversible with both sides, Adjustable with Velcro closure, Protects lower half of face. Great with glasses, goggles, under helmet, or alone, Ideal for hunting, snowboarding, skiing, fishing, Biking, or cold weather activity, One size fits most.
Description
The heavyweight neoprene material is soft and comfortable. One Size Fits Most! It has an adjustable velcro closure at the back of the neck. This face mask covers most of the areas of the face, including the forehead and ears.
Chrome Metal Skull Charm
Paracord- Over 10 ft. Unbraided
Whistle- Small & Loud
Compass- Always Points North
Fire Starter- 1,000 Uses
Knife- Sparks Flint & Cuts
Made from durable PVC
Mounts to rack by Velcro strap and D-rings
Motorcycle rack can slide into flap on bottom
Protective cover over main compartment
Cover secures with side release buckles
Decorative tongue buckles and D-rings on cover
Zippered flap opens to main compartment
Adjustable strap make carrying easier
Zippered compartments on each side
Each side compartment measures 6" x 7"
Heavy duty, hard sheets on sides and bottom
Smooth textile lining
Lifetime warranty
Water resistant
Width 17.5", height 12", depth 13.5"
BLACK SKULL FULL FACE MASK
Made with Polypropylene (Helmet Material)
Polycarbonate Lenses
Matte Black Mask
Soft-Airy Foam Lining for Comfort
Meets ANSI Z87+ Standard for Eyewear
Nose and Mouth Foam Covered Ventilation
Each Pattern Is Unique and Will Vary
Adjustable Strap
Full-Face Coverage
Smoke Lenses
Features:
Made with Polypropylene (Helmet Material)
Polycarbonate Lenses
Matte Black Mask
Soft-Airy Foam Lining for Comfort
Meets ANSI Z80.3 Standard for Eyewear
Nose and Mouth Foam Covered Ventilation
Each Pattern Is Unique and Will Vary
Adjustable Strap
Full-Face Coverage
Smoke Lenses with G-Tech Red Coating
Black Throttle Covers With 17" Fringe
Pair of Genuine Leather Handlebar Fringes
Fringes Length 17" Total Length 21"
Comes in Black Color
Shipped from Midwest USA
Customer satisfaction guaranteed, 30 days money back guarantee
Are you a passionate motorcycle rider looking for a truly distinctive hair comb to help make your riding experience even more special? Look no further than the Tribal Harley-Davidson Shield Comb by A.E.T. - Black. This stylish, Harley-Davidson comb is sure to make heads turn and provide a statement piece that complements your motorcycle lifestyle perfectly! Crafted with meticulous attention to detail, this beautiful hair comb features a unique Tribal design emblazoned with the iconic Harley-Davidson bar and shield logo, complete with sparkling rhinestones for added effect. It is sure to layer any hairstyle perfectly while subtly proclaiming your allegiance to the world’s most renowned name in motorcycles. Grab yours today and join the exclusive ranks of riders who have taken their style up a notch!
Standard benefits:- Keeps your hair neat and tidy while you ride.- Adds a touch of Harley-Davidson's style to your look.- Adds personality to any outfit.- The design is unique and attractive.Emotional benefits:- Shows the world that you're a proud Harley rider.- Makes you feel even more special and connected to the Harley community.- The Harley-Davidson shield logo is iconic and will show everyone that you're a serious rider.Creative benefits:- Shows your allegiance to the world's most renowned motorcycle brand. - Features a unique Tribal design. - Made with meticulous attention to detail.
Rayon-blend
Pull On closure
Bleeding freedom American flag graphic on front
Adorable heavy weight lace accented on sleeves and yoke
High-quality camo thermal made from 65% rayon, 32% polyester and 3% spandex
Attractive Scoop Neck
Made in the USA
Product Information:
Dimension: 3x2 inchBorders: Clean Cut Embroidered Borders for Easy SewingPatch Style: Text OnlyMaterial: 100% Rayon Thread Synthetic Embroidery. Plastic Backing with Japanese Iron on Glue. Twill Fabric.Iron on Instructions: Use a Heat Press for 30 seconds set at 280 Degrees Fahrenheit.Tips for Ironing on Patch: Plug in iron. Crank it to highest setting. Place iron on top of your garment with a frying pan thermometer sandwiched between iron and garment to start the preheating process. Once temperature reaches 280 Degrees Fahrenheit unplug your iron. Temperature will continue to rise and then start to decline. Once it declines to 280 Degrees Fahrenheit, Slide the iron, place your patch and put the iron on top of your patch and press as hard as you can for 30 seconds without moving the iron around. Do not mess with the patch until it has completely cooled down. Do not iron on patches to Leather or Nylon!
Cozy Kevlar with Real-World Fit — Petite-Friendly and Ride-Ready
Eagle Leather’s Women’s Kevlar Sweatpants are exactly what I hoped for in moto pants: soft, incredibly comfortable, and thoughtfully designed for riders. The fabric feels great on long days, and the pockets for hip and knee armor make it easy to add protection without bulk. I’m petite (5'0") and the medium fits perfectly — no awkward dragging or bunching.
I also appreciate the ankle zippers for a clean fit over boots, plus the overall look is stylish and well-made. I initially received the wrong size, but Eagle Leather’s customer service was excellent and fixed it fast. Shipping was timely, communication was clear, and the whole experience felt seamless.
If you want comfortable Kevlar sweats that actually fit petites and still look polished, these are a winner.
Women's Kevlar Sweatpants
Anonymous
Exactly what I was hoping for
Exactly what I was hoping for. Looks amazing. Great quality. Got it in a timely manner
EXO-T520/ ST1400/ R1 AIR FACESHIELD SILVER MIRRORED
Jeff
I went from a 5 to an 8 wearing this.
It was so great to try on every jacket while at the store. Even my dog got to try on a vest, it looked great but she prefers to be a nudist. I am stoked about all the indecisiveness I get to have with this jacket. Do I want the inner vest today or should I take it out? Wanna look a little more puff for the ladies? Just slip the armor into those elbows and shoulders. Is it blazing hot but illegal to be naked where I'm riding? Take it all out and open the zippered vents to get some wind blowing on my body. Oooh yeah, it's gonna feel good to get home safely and take of my pants and jacket.
Men's Top Performer Jacket
Kyle winkle
Hotshot vest
Friendly and knowledgeable people. Quality heavy duty leather with excellent craftsmanship. Super happy that my friend recommended eagle leather. I will definitely be a lifetime customer.
Men's Hotshot Vest
Shelley Finance
Gorgeous Jacket!
I've been wanting a good-quality leather motorcycle jacket for a while and I LOVE this! It fits and fits the bill!
Ladies Popstar Jacket Black
One or more of the items in your cart is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.
Runs a little big . Excellant quality. Super soft leather. Inside pocket snaps look like the base of a rifle shell. Elastic in both pockets to help retain pistol and 2 mags. A compact 9 will fit tightly in the elastic.
I needed a new helmet and did not want to chance getting the wrong size by ordering online. The staff was very helpful in making sure I chose the right size and helmet for my needs from a very large selection and styles. The price was great for the helmet purchased.
I am a thick built woman with a short inseam so I always have trouble finding jeans of any style that fit me properly. These are dang near perfect! Very comfortable, have some stretch to them, and while they are a bit long on me, they aren't SO long that I can't wear them without hemming. I may do that eventually but for now, they are fine to wear as is. I may also get some hip armor later on but I'm happy with the kevlar lining. Really happy with them! Probably have to get a second pair as soon as I can afford to!
These do a pretty good job at letting you manipulate your phone or GPS using normal gloves. Only advice I have is to read the instructions prior to putting them on, I didn't and the first ones fell off. I followed the instructions and they work just fine. Crazy how that works. 🤣
I have a number of riding jeans and leggings. However, those are all quite thick and unfortunately stiff not counting the armor. A stop at Eagle Leather in Lakewood WA for other reasons led me to discover these leggings. They not only fit better but are more flexible and thus comfortable while riding. As a result I look less like a stuffed toy but more like myself. There is a huge selection of gear at this store and a range of styles and prices to match a budget.
