Heat-sealed backing for easy iron-on application.
4 inch x 4 inch
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam.
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Heat-sealed backing for easy iron-on application.
10 Inch
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam.
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
PRODUCT FEATURES:
Lambskin Leather
Double breasted trench coat
Two hand pockets with button closer
Adjustable belt and cuffs
Zip out shell liner
2 year warranty on hardware
Product Description:
Show off some skin in this sleeveless graphic pick featuring a figure-flattering fit and a vintage faded wash.
Full graphic text: Long live the brave, always and forever. Stay strong. Wild and free.
Size S: 26.5'' long from high point of shoulder to hem
95% rayon / 5% spandex
Machine wash
Assembled in the USA using imported materials
LONG LIVE BRAVE SKULL ROSES SIZING CHART
SIZE
NUMERIC-SIZE
BUST
WAIST
HIP
SMALL
4 - 6
34.5"- 35.5"
26"- 27"
36"- 37"
MEDIUM
4 - 6
36.5"- 37.5"
28"- 29"
38"- 39"
LARGE
12-14
39"- 40.5"
30.5"- 32"
40.5"- 42"
X-LARGE
16-18
42"- 43.5"
33.5"- 35"
43.5"- 45"
2X-LARGE
20-22
45"- 46.5"
36.5"- 38"
46.5"- 48"
3X-LARGE
22-24
47.5"- 51"
41"- 45"
50"- 53.5"
What does this shirt mean to you?
In 2025, the Eagle Leather staff embarked on a grand adventure - we wanted to make shirts that made our customers laugh out loud.
It was hard to break the mold of classic biker sayings and come up with something original. Weeks went by. Creativity alluded us. We could only repeat sayings and phrases that had graced patches for decades already. Until one day.... an employee blurted out, "IF YOU THINK MY BIKE IS LOUD, YOU SHOULD HEAR MY WIFE"
Silence fell. It was perfect. Our customers love loud bikes. And a lot of them hate their wives.
We submitted for the art, we selected the perfect, durable but comfortable shirts. Then we printed. Hot, sweaty work printing. But print we did, just picturing the glee on our customers' faces when they saw this shirt that could perfectly express their personalities.
Finally, the shirts hit the floor. And something happened that we never expected.
The shirt sparked a deep philosophical debate. What does "loud" mean? Is the wife a nag? Does she simply speak at a high volume? Or is she a passionate lover?
To every customer, the shirt had a different meaning. So now, when a customer brings this shirt to the register, we always ask, "What does this shirt mean to you?"
Features:
Two and half inches shorter than your traditional vest for a proper fit.
1.0-1.1mm Diamond Naked Cowhide Black Leather
Diamond Naked Cowhide Black leather on shoulder and accents
Perforated Leather on the torso
Club style vest with one-inch collar, covered snaps and hidden cropped center zipper
Two zipper chest pockets
Two snap down slash pockets
Quick access conceal carry pocket on the left side
Interior conceal carry on the right side
YKK zippers
POINT OF MEASUREMENT
S
M
L
XL
XXL
3XL
4XL
5XL
CHEST (GARMENT)
41"
43.5"
46"
48.5"
51"
53.5"
56"
58.5"
CHEST (BODY)
37.5" - 39"
40" - 41.5"
42.5" - 44"
45" - 46.5"
47.5" - 49"
50" - 51.5"
52.5" - 54"
55" - 56.5"
WAIST (GARMENT)
38"
40.5"
43"
45.5"
48"
50.5"
53"
55.5"
WAIST (BODY)
33.5" - 35"
36" - 37.5"
38.5" - 40"
41" - 42.5"
43.5" - 45"
46" - 47.5"
48.5" - 50"
51" - 52.5"
CENTER BACK LENGTH
21.75"
22.5"
22.75"
23.25"
23.75"
24.25"
24.75"
25.25"
ACROSS- SHOULDER
17"
17.65"
18.25"
18.9"
19.5"
20.15"
20.75"
21.4"
* Soft Milled Cowhide 1.1-1.2mm* Hip hugging curvy fit‚ gives sexy look* Extremely low rise with petite double belts in the front and added rivet decorations* Fully lined with mesh liner* The self adjusting back belt that will adjust automatically to size when the front is buckled* Ever so important but extremely rare thigh lace adjusters help customize thigh fitting. The placement of the lace keeps it out of the way while walking or sitting* Zipper buffer prevents liner from catching in the zippers* Snap boot cuffs for easy on and off and cutting to adjust length* Unfinished bottom for trimming to correct size* Heavy snaps and Original YKK zippers. Non-rusting‚ non-corroding
LOWRICE CHAPS SIZING CHART
POINT-OF MEAS-URE-MENT
X-SMALL
SMALL
MED-IUM
LARGE
X-LA-RGE
2X-LA-RGE
3X-LA-RGE
4X-LA-RGE
5X-LA-RGE
INSEAM
31 1/2
31 1/2
31 1/2
32
32
32
32 1/2
32 1/2
32 1/2
WAIST
28
30
32
34
36
38
40
42
44
THI-GH:1R-ICE
17 3/4
18 3/4
19 3/4
20 3/4
21 3/4
22 3/4
23 3/4
24 3/4
25 3/4
BOTT-OM OPE-NING
19 1/4
19 1/2
19 3/4
20
20 1/4
20 1/2
20 3/4
21
21 1/4
Features:
Soft Milled Cowhide 1.2-1.3mm
Hip hugging curvy fit, gives sexy look
Extremely low rise with petite double belts in the front and rivet decorations
Fully lined with mesh liner
Self adjusting back belt that will adjust automatically to size when the front is buckled
Zipper buffer prevents liner from catching in the zippers
Snap boot cuffs for easy on and off and cutting to adjust length
Unfinished bottom for trimming to correct size
Heavy snaps and Original YKK zippers
Non-rusting, Non-corroding
SHELL: Meets or exceeds DOT FMVSS 218 and ECE 22.06. 1470 g +/- 50 g. Sizes XS-3XL. Made from 9K Carbon Fiber, Chin Bar 9K Carbon. 2 shells. ECE “P” and “J” certified as both an open and full face helmet. Pinlock Insert included at no extra charge. Intermediate Oval.
COMFORT: Our best 180 degree modular system for easy on and off. Removable washable, technical fabric liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR: “A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Quick release, quick change mechanism. Pinlock Max ready shield, includes Pinlock insert. Built-in sun shield.
SECURITY: DOT approved Micrometric quick release chin strap for a secure closure. State of the art multi-density EPS. Emergency Release Cheek Pad System.
VENTILATION: Fully adjustable, multi-port dynamic, flow through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
Comes with Factory Installed Cardo 4X (ls2 edition).
SPECIFICATIONS
SHELL
Meets or exceeds DOT FMVSS 218 and ECE 22.05. 1450g,+/50g. Made from Kinetic Polymer Alloy (KPA). 2 Intermediate Oval Shells.
COMFORT
The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool—3D Lasercut cheek pads for all-day comfort with no hot spots.
VISOR
"A Class" Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock inserts included. Builtin Sun Shield.
SECURITY
DOT-approved quick release chin strap for secure closure. State-of-the-art multi-density EPS.
VENTILATION
Fully adjustable, multiport, dynamic, flowthrough ventilation with ported EPS to keep you cool.
2 YEAR WARRANTY
Features:
Shells, XS-M and L-XXXL
2 shell sizes for an optimum fit
Kinetic Polymer Alloy (KPA) shell for ultimate energy management
Built-in drop-down Sun Shield
DOT approved metal buckle quick release chin strap
2 year warranty
SHELL
Meets or exceeds DOT FMVSS 218 and ECE 22.05. 1450g,+/50g. Made from Kinetic Polymer Alloy (KPA). 2 Intermediate Oval Shells
COMFORT
The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool—3D Lasercut cheek pads for all-day comfort with no hot spots
VISOR
"A Class" Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock inserts included. Builtin Sun Shield
SECURITY
DOT-approved quick release chin strap for secure closure. State-of-the-art multi-density EPS
VENTILATION
Fully adjustable, multiport, dynamic, flowthrough ventilation with ported EPS to keep you cool
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
SHELLMeets or exceeds DOT FMVSS 218 and ECE 22.05.1450g,+/-50g.Sizes XS-3XL. Made from Kinetic Polymer Alloy (KPA). 2 Shells. Intermediate Oval. COMFORTHighest quality, removable, washable, technical fabric liner wicks moisture to keep you cool. 3D Laser-cut cheek pads for all day comfort with no hot spots.VISOR"A Class" Polycarbonate face shield is optically correct, scratch and UV resistant. Includes Pinlock insert. "C" style quick change shield system. Built-in Sun Shield.SECURITYDOT approved quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State-of-the-art multi-density EPS.VENTILATIONFully adjustable, multi-port, dynamic, flow-through ventilation with ported EPS to keep you cool.
LS2 Bagger Murica Eagle Helmet
The LS2 Bagger Helmet starts with an ultra-lightweight fiberglass shell. LS2 adds a removable, washable comfort liner, so you can keep your lid as fresh as new. Also included is a zip-off neck skirt that will keep you warmer on cool days and can be removed when the sun is shining. The neck skirt has pockets for speakers from your MP3 player, and a hidden pocket around the neck to hide any wires. Rounding out the list is a shorter removable, 3-snap peak to shade your eyes.
Features:
HPFC (High Performance Fiberglass Composite) shell
2 shell sizes (XS-MD and LG-2XL)
Quick release strap
Shorter removable 3-snap peak
Zip-off neck skirt to keep you warm when the temps drop
DOT approved
LS2 HH568 Bagger Hard Luck Helmet
The LS2 Bagger Helmet starts with an ultra-lightweight fiberglass shell. LS2 adds a removable, washable comfort liner, so you can keep your lid as fresh as new. Also included is a zip-off neck skirt that will keep you warmer on cool days and can be removed when the sun is shining. The neck skirt has pockets for speakers from your MP3 player, and a hidden pocket around the neck to hide any wires. Rounding out the list is a shorter removable, 3-snap peak to shade your eyes.
Features:
HPFC (High Performance Fiberglass Composite) shell
2 shell sizes (XS-MD and LG-2XL)
Quick release strap
Shorter removable 3-snap peak
Zip-off neck skirt to keep you warm when the temps drop
DOT approved
When it comes to cars, bikes and half helmets, who doesn't like a good.
Features:
SHELL
Meets or exceeds DOT FMVSS 218
748g,+/-50g. Sizes XS-2XL
Made from Kinetic Polymer Alloy (KPA)
3 Shells
Intermediate Oval
COMFORT
Everything you need and nothing you don't in this basic minimum half helmet
SECURITY
Double D strap closure for a secure fit
Helmet Sizing
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a . It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
SPECIFICATIONS
SHELLMeets or exceeds DOT FMVSS218 and ECE22.06.1390 g +/- 50gSizes XS-3XL.Made from High Performance Fiberglass Composite (HPFC) 6 shells.COMFORTRemovable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.VISOR“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.SECURITYDOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.VENTILATIONFully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.5 YEAR WARRANTY
SPECIFICATIONS:
SHELL Meets or exceeds DOT FMVSS218 and ECE22.06.1390 g +/- 50gSizes XS-3XL.Made from High PerformanceFiberglass Composite (HPFC) 6 shells.COMFORT
Removable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR
“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.
SECURITY
DOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATION
Fully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
Helmet with a sporty design, perfect for city commuters. Very light and safe thanks to its shell in KPA. Maximum ventilation thanks to the two large air inlets. Micrometric buckle makes for a secure fit and easy off and on. Wide visor with anti-scratch treatment. Drop-down sun visor.
MATERIALKPA
WEIGHT1250 (±50 gr.)
The LS2 Dragon Forged Carbon Full Face Helmet blends lightness with superior strength through its 6K carbon construction. Perfect for both daily rides and weekend adventures, it ensures exceptional protection, comfort, and performance. Elevate your riding experience with this sport-touring helmet designed to keep you safe and confident on every journey. Choose Dragon and push your limits with unmatched reliability.
ECE 22.06
6K Carbon Shell
Weight = 1450 (+/- 50) Grams
3 Shell Sizes (2XS-S, M-L, XL-3XL
SPECIFICATIONSSHELL Meets or exceeds DOT FMVSS 218 and ECE 22.05. 1150g,+/50g. Made from Kinetic Polymer Alloy (KPA). 1 Intermediate Oval Shell. COMFORT The highest quality, removable, washable, technical fabric liner wicks moisture to keep you cool. 3D Laser Cut cheek pads for all-day comfort with no hot spots. VISOR Wide eye port accommodates most modern goggles. SECURITYKPA shell, emergency release cheek pads, and multi-density EPS all add to the safest MX helmet in its class. Double D ring strap for a secure fit.VENTILATION Fixed multiport ventilation with ported EPS to keep you cool.2 YEAR WARRANTY
The LS2 Infinity offers that ultimate sense of freedom riders want, wrapped in a technically advanced, modern, open-face motorcycle helmet design. Whatever your favorite style of riding, the Infinity offers all you need and more in a lightweight, open-face helmet.
SHELLMeets or exceeds DOT FMVSS 218 and ECE 22.06.1350 g +/- 50g.Sizes XS-3XL.Made from High Performance Fiberglass Composite (HPFC).4 Shells.Intermediate Oval.
COMFORTRemovable, washable, hypoallergenic liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Built-in sun shield.
Pinlock ready and pinlock shield included
SECURITYDOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATIONFully adjustable, multi-port dynamic, flow through ventilation with channeled EPS to keep you cool.
The LS2 Infinity offers that ultimate sense of freedom riders want, wrapped in a technically advanced, modern, open-face motorcycle helmet design. Whatever your favorite style of riding, the Infinity offers all you need and more in a lightweight, open-face helmet.
SHELLMeets or exceeds DOT FMVSS 218 and ECE 22.06.1350 g +/- 50g.Sizes XS-3XL.Made from High Performance Fiberglass Composite (HPFC).4 Shells.Intermediate Oval.
COMFORTRemovable, washable, hypoallergenic liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Built-in sun shield.
Pinlock ready and pinlock shield included
SECURITYDOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATIONFully adjustable, multi-port dynamic, flow through ventilation with channeled EPS to keep you cool.
TECH SPECS
CONSTRUCTION
Textile
FEATURES
Touchscreen-Capable FingerHook & Loop Adjustment at CuffLarge Mesh PanelMicrofiber Leather at Palm to Minimize Abrasion
PROTECTION
Microfiber Leather Reinforcement at the Palm
Urban-touring helmet with an elegant and functional design. The shell is made from our proprietary HPTT, a lightweight material that offers the best balance between performance and price. Perfect for commuting or touring.
The LS2 Helmets Spitfire is a modern take on the classic bobber style 3/4 open face helmet. It includes an adjustable two position drop down sun shield. LS2 uses 2 outer shell sizes to allow the smallest, lightest possible helmet. The Spitfire includes a classically styled goggle strap. The hypoallergenic interior of the Spitfire is equipped with a multi-density EPS, and a fully removable, washable comfort liner, constructed from multi-density foam, which is laser cut to fit the curves of the rider's face.
Built-in two-position sun shield
Full removable and washable hypoallergenic padding is 3D laser cut for comfort
Secure full metal latch and DOT approved quick-release chin strap is easy to open with a gloved hand
Meets or exceeds DOT standards
LS2 Spitfire Helmet
The LS2 Spitfire Helmet starts with a lightweight shell. Add a built-in, drop down inner sun shield. Build the rich comfort padding out of hypoallergenic and breathable materials and add a built-in ventilation system to allow fresh air to pass through the material, keeping you cool and dry. The 3D laser cut interior offers the perfect fit, with no hot spots, for all day comfort. Finish it off with a DOT-approved quick release chinstrap, and you have a modern, comfortable helmet with the retro style you love.
Features
Built-in sun shield
Ventilated, hypoallergenic comfort padding to keep you cool
Quick release chinstrap
DOT approved
LIMITED EDITION - The LS2 Helmets Spitfire is a modern take on the classic bobber style 3/4 open face helmet. It includes an adjustable two position drop down sun shield. LS2 uses 2 outer shell sizes to allow the smallest, lightest possible helmet. The Spitfire includes a classically styled goggle strap. The hypoallergneic interior of the Spitfire is equipped with a multi-density EPS, and a fully removable, washable comfort liner, constructed from multi-density foam, which is laser cut to fit the curves of the rider's face.
Built-in two-position sun shield
Full removable and washable hypoallergenic padding is 3D laser cut for comfort
Secure full metal latch and DOT approved quick-release chin strap is easy to open with a gloved hand
Meets or exceeds DOT standards
LS2 Helmets Stream II Solid Helmet W/ Sunshield
The LS2 Stream II Solid Helmet features an aerodynamic, sport styled shell made from LS2’s proprietary Kinetic Polymer Alloy (KPA). KPA uses nanotechnology to blend microscopic aramid fibers with a high-end polymer and allows for amazing energy managing performance with managed flexibility that absorbs energy without the ricochet effect of inferior materials.
The Stream II meets the ECE 22.06 rotational energy management specifications using Advanced Rotational Energy Management Technology (AREM), another LS2 proprietary process. The rear spoiler allows for dynamic flow-through ventilation, plus the 3D laser cut foam in the cheek pads, removeable, washable liner with special flex-crown comfort system is super comfortable and easy to keep fresh. 3 shells and 5 energy absorbing EPS liners make for a fit that is nothing short of amazing. The overall finish and performance sets the Stream II at the forefront of full-face motorcycle helmets.
Features:
Intermediate oval fit
3 shells
5 energy absorbing EPS liners
High tech, aerodynamic, sport styled Kinetic Polymer Alloy shell
AREM rotational energy management meets ECE 22.06 standards
Dynamic, flow-through ventilation
Quick release chin strap
Class A polycarbonate Pinlock ready face shield (Pinlock sold separately)
Meets or exceeds ECE 22.06 and DOT FMVSS standards
LS2 Stream II Lux Helmet
The LS2 Stream II Helmet features an aerodynamic, sport styled shell made from LS2’s proprietary Kinetic Polymer Alloy (KPA). KPA uses nanotechnology to blend microscopic aramid fibers with a high-end polymer and allows for amazing energy managing performance with managed flexibility that absorbs energy without the ricochet effect of inferior materials.
The Stream II meets the ECE 22.06 rotational energy management specifications using Advanced Rotational Energy Management Technology (AREM), another LS2 proprietary process. The rear spoiler allows for dynamic flow-through ventilation, plus the 3D laser cut foam in the cheek pads, removeable, washable liner with special flex-crown comfort system is super comfortable and easy to keep fresh. 3 shells and 5 energy absorbing EPS liners make for a fit that is nothing short of amazing. The overall finish and performance sets the Stream II at the forefront of full-face motorcycle helmets.
Features:
Intermediate oval fit
3 shells
5 energy absorbing EPS liners
High tech, aerodynamic, sport styled Kinetic Polymer Alloy shell
AREM rotational energy management meets ECE 22.06 standards
Dynamic, flow-through ventilation
Quick release chin strap
Class A polycarbonate Pinlock ready face shield (Pinlock sold separately)
Moisture wicking liner and cheek pads
Meets or exceeds ECE 22.06 and DOT FMVSS standards
It’s hard to imagine just how good the LS2 Stream II full-face motorcycle helmet is. Style, features and performance that surpass helmets costing literally twice the price, this helmet is an out-of-the-park home run. It starts with an aerodynamic, sport styled shell made from LS2’s proprietary Kinetic Polymer Alloy (KPA). This high-tech material uses nanotechnology to blend microscopic aramid fibers with a high-end polymer. This blend allows for amazing energy managing performance with managed flexibility that absorbs energy without the ricochet effect of inferior materials. The Stream II meets the ECE 22.06 rotational energy management specifications using Advanced Rotational Energy Management Technology (AREM), another LS2 proprietary process. The rear spoiler allows for dynamic flow-through ventilation. The 3D laser cut foam in the cheek pads, removeable, washable liner with special flex-crown comfort system is super comfortable and easy to keep fresh. 3 shells and 5 energy absorbing EPS liners make for a fit that is nothing short of amazing. The optically correct, Class A polycarbonate shield is Pinlock ready, for the ultimate in fog management (Pinlock sold separately). The overall finish and performance sets the Stream II at the forefront of full-face motorcycle helmets. Even those costing twice the price. Meets or exceeds ECE 22.06 and DOT FMVSS standards. Intermediate oval fit.
Quick Release System
Scratch Resistant
UV Resistant
Fog Resistant
Pinlock Max Vision Ready
Quick Release Strap
Certified: ECE 22.05
HELMET SIZING
Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.
Size
Centimeters
Inches
X-Small
53-54 cm
20 7/8 - 21 1/4
Small
55-56 cm
21 5/8 - 22 7/8
Medium
57-58 cm
22 1/2 - 22 7/8
Large
59-60 cm
23 1/4 - 23 5/8
X-Large
61-62 cm
24 - 24 3/8
2X-Large
63-64 cm
24 3/4 - 25 1/4
3X-Large
64-65 cm
25 5/8 - 26
4X-Large
66-67 cm
26 3/8 - 26 3/4
One or more of the items in your cart is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.
Runs a little big . Excellant quality. Super soft leather. Inside pocket snaps look like the base of a rifle shell. Elastic in both pockets to help retain pistol and 2 mags. A compact 9 will fit tightly in the elastic.
I needed a new helmet and did not want to chance getting the wrong size by ordering online. The staff was very helpful in making sure I chose the right size and helmet for my needs from a very large selection and styles. The price was great for the helmet purchased.
I am a thick built woman with a short inseam so I always have trouble finding jeans of any style that fit me properly. These are dang near perfect! Very comfortable, have some stretch to them, and while they are a bit long on me, they aren't SO long that I can't wear them without hemming. I may do that eventually but for now, they are fine to wear as is. I may also get some hip armor later on but I'm happy with the kevlar lining. Really happy with them! Probably have to get a second pair as soon as I can afford to!
These do a pretty good job at letting you manipulate your phone or GPS using normal gloves. Only advice I have is to read the instructions prior to putting them on, I didn't and the first ones fell off. I followed the instructions and they work just fine. Crazy how that works. 🤣
I have a number of riding jeans and leggings. However, those are all quite thick and unfortunately stiff not counting the armor. A stop at Eagle Leather in Lakewood WA for other reasons led me to discover these leggings. They not only fit better but are more flexible and thus comfortable while riding. As a result I look less like a stuffed toy but more like myself. There is a huge selection of gear at this store and a range of styles and prices to match a budget.
Cozy Kevlar with Real-World Fit — Petite-Friendly and Ride-Ready
Eagle Leather’s Women’s Kevlar Sweatpants are exactly what I hoped for in moto pants: soft, incredibly comfortable, and thoughtfully designed for riders. The fabric feels great on long days, and the pockets for hip and knee armor make it easy to add protection without bulk. I’m petite (5'0") and the medium fits perfectly — no awkward dragging or bunching.
I also appreciate the ankle zippers for a clean fit over boots, plus the overall look is stylish and well-made. I initially received the wrong size, but Eagle Leather’s customer service was excellent and fixed it fast. Shipping was timely, communication was clear, and the whole experience felt seamless.
If you want comfortable Kevlar sweats that actually fit petites and still look polished, these are a winner.
Women's Kevlar Sweatpants
Anonymous
Exactly what I was hoping for
Exactly what I was hoping for. Looks amazing. Great quality. Got it in a timely manner
EXO-T520/ ST1400/ R1 AIR FACESHIELD SILVER MIRRORED
Jeff
I went from a 5 to an 8 wearing this.
It was so great to try on every jacket while at the store. Even my dog got to try on a vest, it looked great but she prefers to be a nudist. I am stoked about all the indecisiveness I get to have with this jacket. Do I want the inner vest today or should I take it out? Wanna look a little more puff for the ladies? Just slip the armor into those elbows and shoulders. Is it blazing hot but illegal to be naked where I'm riding? Take it all out and open the zippered vents to get some wind blowing on my body. Oooh yeah, it's gonna feel good to get home safely and take of my pants and jacket.
Men's Top Performer Jacket
Kyle winkle
Hotshot vest
Friendly and knowledgeable people. Quality heavy duty leather with excellent craftsmanship. Super happy that my friend recommended eagle leather. I will definitely be a lifetime customer.
Men's Hotshot Vest
Shelley Finance
Gorgeous Jacket!
I've been wanting a good-quality leather motorcycle jacket for a while and I LOVE this! It fits and fits the bill!
