Work the ElementsDanner built the Cedar River to be an on-the-job mainstay you won't want to take off when the workday ends. A distinctive moc toe on the full-grain leather upper gives it timeless style, while a Danner Dry lining provides waterproof protection you can count on. Long days on your feet feel just a little bit shorter thanks to a PU midsole with a wedge design that reduces underfoot pressure points. The outsole is made of durable rubber with Goodyear Welt construction, so it's built to last.Premium Leather UpperThe upper on this boot is constructed from durable and water-resistant premium leather.Danner Dry100% waterproof barrier allows moisture to escape without letting water in, keeping your feet dry and comfortable all day long.Padded CollarProvides additional comfort, particularly during break-in period.Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.Danner® Cedar River OutsoleThis non-marking, oil-and-slip-resistant rubber outsole offers confident traction and all-day comfort on hard surfaces.Goodyear Welt ConstructionComparable durability and longevity to our stitchdown construction, the Goodyear welt construction creates a stable, long-lasting attachment of the outsole to the upper of the boot.How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Carry heritage luck on every ride. The Celtic Guardian Bell is a rider’s talisman—hung low on the bike to ward off road “gremlins” while adding timeless Celtic style to your build.
Crafted in the USA from lead-free fine pewter and packaged in a velvet pouch, it’s a gift-ready classic. For the full legend, have it gifted by a friend and mount it near the lowest part of the frame for that protective jingle mile after mile.
Product Highlights
Design: Celtic legend/guardian bell
Material: Lead-free, fine pewter
Made in USA: Quality craftsmanship
Gift-Ready: Includes velvet pouch
Tradition: Hang low on the bike; a bell gifted by a friend is said to offer extra protection
A small bell with a big legend—ring in safe miles.
The Centric urban-touring helmet blends elegant design with sporty functionality, making it ideal for modern commuters and urban adventurers alike. Crafted from our proprietary KPA (Kinetic Polymer Alloy), it delivers a lightweight yet robust shell that offers outstanding protection and performance at exceptional value. Whether you're weaving through city traffic or setting out on longer journeys, the Centric delivers the perfect balance of practicality, comfort, and sport-inspired design.
The LS2 CENTRIC includes a Pinlock 70 MaxVision insert at no extra charge. The CENTRIC also unique as there are three different pre-packaged shield options available:
Dark Smoke: This version comes with an additional dark smoke shield—perfect for sunny rides while enhancing your style with a sleek, aggressive edge.
The Centric urban-touring helmet blends elegant design with sporty functionality, making it ideal for modern commuters and urban adventurers alike. Crafted from our proprietary KPA (Kinetic Polymer Alloy), it delivers a lightweight yet robust shell that offers outstanding protection and performance at exceptional value. Whether you're weaving through city traffic or setting out on longer journeys, the Centric delivers the perfect balance of practicality, comfort, and sport-inspired design.
The LS2 CENTRIC includes a Pinlock 70 MaxVision insert at no extra charge.
Photochromic: The flagship model of the centric comes pre-installed with a photochromic shield that automatically adjusts to changing sunlight conditions, ensuring optimal visibility and comfort throughout your ride.
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
The Centric urban-touring helmet blends elegant design with sporty functionality, making it ideal for modern commuters and urban adventurers alike. Crafted from our proprietary KPA (Kinetic Polymer Alloy), it delivers a lightweight yet robust shell that offers outstanding protection and performance at exceptional value. Whether you're weaving through city traffic or setting out on longer journeys, the Centric delivers the perfect balance of practicality, comfort, and sport-inspired design.
The LS2 CENTRIC includes a Pinlock 70 MaxVision insert at no extra charge. The CENTRIC also unique as there are three different pre-packaged shield options available:
Silver Iridium: This version includes a silver iridium shield in the box, adding a reflective, high-tech finish for riders who want a premium look while reducing glare in intense light.
The Centurion Lite 1-Piece Suit offers comfort and protection with a waterproof design, CE Level-1 armor, and excellent ventilation for long rides.
SPECS
Abrasion-resistant waterproof/breathable 600D Polyester main shell
Electronically seam-sealed construction
DWR outer coating sheds water
Heavy-duty abrasion-resistant 1680D Ballistic Poly overlays in impact zones
Heavy-duty Aramid 4-way stretch panels for maximum comfort and articulation
Extra-long front main zipper for easy on/off entry
Armanox CE® Level-1 armor at shoulders, elbows, knees and back
Pockets for optional hip armor (EVA foam hip padding included)
Genuine leather inner leg protection panels
Zippered vents include: arms, armpit, chest, back and hidden front center
Oversized chest ventilation for maximum direct airflow
High intensity 360° reflective accents for rider visibility
Waist belt with hidden stretch panel for a customized precise fit
Sliding arm take-up straps for adjustability
Extra-large hook and loop cuff closures for maximum adjustability
Multiple storage pockets including an interior waterproof napoleon pocket
Waterproof YKK Aquaguard zippers throughout
4-year warranty
Fast and Effective Motorcycle Chain Cleaning
Motorex Chain Clean Degreaser is a powerful aerosol cleaner formulated for motorcycle drive chains. It loosens caked on grease, oil, dirt, and road residue, creating a clean surface for fresh chain lubricant and routine maintenance.
The formula works with common sealed motorcycle chains and is suitable for both O ring and X ring designs. It is safe for chain sealing rings when used according to the instructions on the container.
Features
Highly effective cleaner for motorcycle drive chains
Removes caked on grease, dirt, oil, and residue
Suitable for O ring and X ring chains
Safe for chain sealing rings when used as directed
Provides a clean foundation for fresh chain lubricant
Convenient 500 mL aerosol can
VOC compliant formula
Recommended Use
Apply according to the directions and safety warnings printed on the container. Allow the chain to dry after cleaning, then apply a motorcycle specific chain lubricant before riding. Regular cleaning and lubrication can help reduce abrasive buildup and extend the service life of the chain and sprockets.
Size: 500 mL aerosol can.
A high-performance touring helmet designed for long rides. Constructed with our HPFC, combining light weight with outstanding safety. Featuring excellent peripheral vision and an integrated sun visor. Equipped with Pinlock 120 XLT Max Vision for enhanced safety.
SHELL
Meets or exceeds DOT FMVSS 218 and ECE 22.06
Weight: 1500g +/- 50g
Sizes: XS3XL
High Performance Fiberglass Composite (HPFC) construction
3 Shells / 5 EPS / 7 Liners / 3 Cheek Pads
COMFORT
Premium removable and washable COOLMAX liner
Moisture-wicking, breathable, quick-drying material
Hypoallergenic and antibacterial properties
SHIELD
Optically correct A-Class Polycarbonate face shield for superior clarity
Double-injected rubber edging for a secure water- and debris-tight seal
Anti-scratch, UV-resistant treatment
SECURITY
Micrometric quick-release buckle
Reinforced chin strap
Multi-density EPS for advanced impact absorption
Emergency Release Cheek Pads
VENTILATION
Fully adjustable multi-port airflow system
Dynamic flow-through ventilation
Ported EPS channels air efficiently throughout the helmet
MATERIAL
HPFC
WEIGHT
1500g (±50 gr.)
SIZES (4 Shells)
2XS-S / M-L / XL-3XL
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
Patch
feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
• Identify where you want the patch and outline the area with tailor’s chalk
• Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
• Position your inside hand so it is resting flat between the lining and outlines area
• Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
• Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
• This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
• Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
• Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
• Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
• Preheat your iron to 325-335 degrees. Do Not Use Steam.
• Press the area where you want your patch to be for 25 seconds
• Position the patch on the garment so that it is positioned where you would like it to be
• Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
• Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
• Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
• Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
• Let the garment cool completely before wearing
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Matte Black Frame
Vented EVA Foam
Comes Boxed with Micro-Fiber Pouch for Storage and Safe Cleaning
Lenses Transform According to Existing Lighting Conditions
Transforms from Clear to Smoke
RX-ABLE
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Vented EVA Foam
Gloss or Matte Black Frames
Smoke Lens
RX-ABLE
CHLOE - WOMEN'S LEATHER JACKET
PRODUCT OVERVIEW:
Elevate your style quotient with the Chloe Women's Leather Jacket from Eagle Leather. Crafted from genuine lambskin, this jacket is designed to deliver both elegance and functionality. Whether you're heading out for a thrilling ride or a casual evening, the Chloe jacket is bound to turn heads with its asymmetrical zipper and buckled accents.
FEATURES:
Genuine lambskin leather
Asymmetrical zipper front
Long sleeves
Buckle & zipper accents
Wind resistant shell
3 outside pockets
2 interior pockets
Lined
FEATURES AND BENEFITS:
Genuine Lambskin Leather: Ensures durability and offers a soft, luxurious feel.
Asymmetrical Zipper Front: Adds a trendy and edgy aesthetic.
Buckle & Zipper Accents: Enhance the jacket's biker-chic look.
Wind Resistant Shell: Provides protection against the cold and windy conditions.
Multiple Pockets: Offer ample storage, keeping your essentials within arm's reach.
Lined Interior: Adds an additional layer of warmth and comfort.
Synthetic leather.
Snap on crash bar bag.
Front pocket to fit your personal items.
Right side bag.
Easy snap on attachment.
Right Side Synthetic Leather Crash Bar Bag
Color: Black
Size:
Pouch: 10’’ x 7’’ x 4’’
Total Length: 15’’ x 6’’
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Bold Faith Inspired Back Patch
Make a strong personal statement with a large embroidered Christian cross framed by detailed wings. Rich brown and gold stitching stands out against the black velvet base, while flowing tribal patterns and a small heart detail give the design depth from every angle.
Features
Large back patch designed for motorcycle vests and jackets
Measures approximately 10.9 inches by 12 inches
Detailed rayon thread embroidery over black velvet fabric
Brown, gold, and black color palette
Clean cut embroidered border makes sewing easier
Heat activated backing for compatible fabrics
Application
For leather vests and jackets, sew the patch securely in place. Do not apply direct heat to leather or nylon. On compatible cotton or denim, the patch may be applied with a heat press at approximately 280 degrees Fahrenheit for 30 seconds. Always confirm the garment can tolerate the required heat before application.
For riding gear, professional sewing is recommended for the most secure installation.
Included: One Christian Cross Back Patch. The vest shown in the product gallery is not included.
Chrome luggage rack is for bobbed rear fenders. Rack is designed for loads of 10 pound or less.
FITMENT
2000 / 2005 FXST
MEASURMENTS
Length: 12 inches
Width: 4-1/2 inches
Casual Style with Motorcycle-Specific Protection
The Alpinestars Chrome Riding Shoes combine the look and comfort of a modern high-top with protection designed for daily motorcycle use. The lightweight split-suede upper, reinforced impact zones and supportive sole make them a practical choice for commuting, city rides and comfortable off-bike wear.
Protection and Construction
Durable, lightweight split-suede upper
Dual-density ankle protectors for targeted impact protection
Reinforced heel and toe areas for added structure and durability
Alpinestars Transversal Protection Frame (TPF) constructed from lightweight PA material
CE certified to EN 13634:2017
Comfort and Everyday Function
OrthoLite® insole provides long-lasting cushioning and breathability
Soft mesh at the rear collar improves comfort around the ankle
Advanced rubber-compound cup sole with a PU midsole balances grip, durability and walking comfort
Elastic closure at the top secures the lace loops to help prevent flapping or snagging on the motorcycle
Clean urban profile works well both on and off the bike
Fit and Sizing
Offered in US men’s sizes 8–14, including half sizes. For the best fit, measure your foot and allow room for the socks you normally wear while riding.
Available colors: Black/Asphalt and Black/White.
Features:
Fits small/large faces
AirShield® Wind Blocking Foam Eyecup (not removable)
100% UVA/UVB protection + distortion-free clarity
Shatter Resistant Lenses
AIRSHIELD® EYECUP TECHNOLOGY
Maximum Protection: A complete seal around your eyes creates total protection from the elements including wind, dust, and other airborne irritants.
EYECUP FILTERED VENTS = NO FOGGING
Patented filtering vents manage air circulation, reduce fogging, and keep your vision free from any distortion that may be caused by lens fogging.
DURABLE & WEATHER RESISTANT FOAM
The closed-cell foam material is unaffected by weather, resistant to perspiration and grime, allowing for a longer lasting more comfortable eyecup.
LENS
100% UVA/UVB Protection
In the Box
Zippered Hard Case with 7eye Emblem
Microfiber Soft Case/Cloth
Sunglasses Retainer
7eye Decal
NOTE: To find the right size and fit, it is important to consider the curvature of your eyebrow bone & cheek bone. The various facial anatomies are the main factors to be considered on how the eyecup will work to offer a complete seal around the orbit of your eyes. Traditional sizing or fitting of a fashion frame does not necessarily pertain.
Description
The cornerstone in 7eye® Airshield® Technology is our patented Orbital Seal®. A patented multi-layered material using filtered vents to manage airflow which creates a comfortable, windless, and debris free environment for your eyes. Replacement Eyecup for Panoptx Churada models, the foam-lined Motor eyecup can be easily removed to convert your Speed-Rated eyewear into regular sunglasses. Clip it into place to create a completely windproof, goggle-like seal around your eyes.
Features:
Quick drying overcoat prevents sweat absorption
Soft foam (Latex-Free) contours to your face
Patented vented seals manage airflow
Soft Sheepskin Leather with an Adjustable Women’s FitThe Cindy Women’s Motorcycle Vest combines the supple feel of lightweight sheepskin with practical riding features. Its deep V-neck, shaped seams and D-ring side lacing create a clean silhouette while letting you fine-tune the fit for comfortable layering.Features
0.7–0.8 mm Sheep Diamond leather for a soft, lightweight feel
Deep V-neck with a full-length center zipper
D-ring side lacing for an adjustable fit
Two zippered slash pockets
Two large interior pockets
Rear armor pocket designed for a compatible CE Level 2 back protector
Satin lining with access panels for easier patch and embroidery work
Fit and Armor NotesReview the product-specific size chart before ordering, especially if you plan to wear the vest over heavier layers. Back armor is sold separately; confirm protector compatibility before purchase.
The Ciro® Engine Guard Toe Rests are a great addition to your Harley, Indian, or any motorcycle with 1-1/4" engine guards. These elegant toe rests mount directly to the engine guard allowing you to keep your heel on the floorboard with a secure place for your toe on the engine guard. This is a comfortable and popular riding position because it allows you to stretch out while also keeping your feet close to the controls.
Key Features- Easy installation- Mounts to any 1-1/4" Round engine guard (except Harley-Davidson chopped engine guard). - Protrudes out past the engine guard creating a wide point- Designed with a smooth curved outside profile- Rubber portion is designed with a raised end to provide secure footing- Unique open design provides an ancillary tie down point
Mounting Hardware IncludedYes
Included With KitFootrest (2)Hardware kit
Drilling RequiredNo
Est. Install Time15 Minutes
SHELL Meets or exceeds DOT FMVSS 218 and ECE 22.06.1300 g +/- 50g.Sizes XS-3XL.Made from 6K carbon fiber. 6 shells.Intermediate Oval.COMFORT
Removable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR
“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.
SECURITY
DOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATION
Fully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
Before You Select a Size: Helmet-Fit Facts
A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.
Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
Why Come to Eagle Leather for a Helmet Fitting?
Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.
For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.
