Description
Give Respect Embroidered Patch with heat sealed backing. Perfect for leather jackets and leather vests.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
GloveTacts make most gloves touch-screen compatible. By using GloveTacts you can keep your gloves on while using touch devices, making use of your devices more enjoyable and productive.
GloveTacts are stickers that are easily applied to the outside of the glove wherever touch sensitivity is needed. Made with tough polyurethane film with a specially formulated adhesive they are designed to last.
Features:
TOUCH SCREEN: Use to make most gloves touch screen compatible; adhesive will stick to most glove materials
COMPATIBLE: Works with many glove types: motorcycle, leather, safety, winter, liners, ski, snowboard, bicycle
VERSATILE: Extremely thin material with acrylic adhesive
VALUE: Each package contains 6 stickers
Glow with skull style—day or night. This Glow-in-the-Dark Skull EZ Tube is lightweight, breathable, and built for ride-ready versatility. The poly-cotton design wears comfortably on long days and stands out after dark with glow-ink details.
Use it your way: as a neck gaiter, quick face cover, or headband/liner under a helmet. At 20" long, it offers generous coverage without bulk so you can stay focused on the miles.
Product Highlights
Glow Ink: Skull graphic charges in light and glows after dark
Material: Lightweight poly-cotton blend for breathable comfort
Multi-Wear: Neck gaiter, face cover, headband/liner, and more
Length: 20" long for ample coverage
Helmet Friendly: Low-bulk profile fits cleanly under lids
Low bulk, high versatility—ride covered.
Description
FF-98 RELIANCE
The FF-98 features GMAX's New quick release face shield mechanism with shield lock and our integrated LED rear light with option to upgrade to our Brake Light Kit. The ECE rating gives you the assurance that this helmet has been certified by the leader in "world standard" safety equipment testing.
Features:
ECE / DOT Approved
SpaSoft interior keeps you dry and comfortable
COOLMAX® CORE technology wicks moisture away from your body and dries quickly
Charcoal bamboo fiber keeps odor away by eliminating bacterial growth
Removable, adjustable and washable SpaSoft interior allows for easy cleaning and custom fitting
New tool-less and quick release face shield mechanism
Eight intake and exhaust vents
Integrated multi-function red LED rear light included (Optional wireless brake light kit available P/N 72-3781)
Lightweight Poly Alloy shell
Large size is only 3.5lb
Drop down sun shield with anti-fog coating
UV400 coated shields with 100% UV protection
Shield lock
Breath deflector and chin curtain included
Built in speaker pockets
Intercom compatible
Kids know riding is fun and GMAX® makes it even more fun with the GM-49Y. With the availability of three interchangeable interior sizes, the helmet can be custom fit to make the child safe and comfortable. Parents will be happy knowing that their little one is protected in a light weight, DOT approved helmet that they will love wearing.
DOT Approved
One shell size with removable, washable interior that can be adjusted to three different sizes so the helmet can grow as your child grows
Intake and Exhaust vents aligned with superior channeling to maintain a constant airflow to help pull in fresh air and removed hot air
Quick change "Maximum Seal" shields available in single and anti-fog dual lens
Large eye port for improved range of vision
Lightweight Poly Alloy shell 2.9 lb
Intercom Compatible
Features:
Easy to install, no tools required
Install or remove in seconds
Relieves stress on your wrist on long trips
Rests on the brake lever to hold the throttle open
Roll off the throttle manually to disengage Go Cruise
Features:-
Water resistant Technaline goatskin leather – Last up to 5 times longer than regular leather
Gel-pad palm for maximum comfort
Leather pulls for easy removal
Total-pin hole on hand back – Breathable leather
Velcro wrist closure
Perfect for summer riding
SIZE: S-3XL
GOAT FINGERLESS GELPAD SIZING CHART
<
MEN'S SIZES
INCHES
CM
X-SMALL
6 1/4
16 1/2
SMALL
7 1/4
18 1/2
MEDIUM
8 1/4
21
LARGE
9 1/4
23 1/2
X-LARGE
10 1/4
26
2X-LARGE
11 1/4
28 1/2
A little luck for every mile. The Green Clover Guardian Bell is a rider’s talisman—hung low on the bike to ward off road “gremlins” while adding a clean, classic touch to your build.
Crafted in the USA from lead-free fine pewter and packaged in a velvet pouch, it’s a gift-ready tradition riders have shared for years. For the full legend, have it gifted by a friend and mount it near the lowest part of the frame for that protective jingle mile after mile.
Product Highlights
Design: Green Clover guardian/legend bell
Material: Lead-free, fine pewter
Made in USA: Quality craftsmanship
Gift-Ready: Includes velvet pouch
Tradition: Hang low on the bike; gifting from a friend is said to bring extra luck
Small bell, big luck—ring in safe miles.
Description
Hand Grenade 4" Embroidered patch with Heat-sealed backing for easy iron-on application.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Ride with the Reaper on your side. The Grim Reaper Guardian Bell is a rider’s talisman—hung low on the bike to ward off road “gremlins” and bad vibes while adding a bold touch to your build.
Crafted in the USA from lead-free fine pewter and packed in a velvet pouch, it’s a gift-ready classic. For the full legend, have it gifted by a friend and mount it near the lowest part of the frame for that protective jingle mile after mile.
Product Highlights
Design: Grim Reaper legend/guardian bell
Material: Lead-free, fine pewter
Made in USA: Quality craftsmanship
Gift-Ready: Includes velvet pouch
Tradition: Hang low on the bike; gifting from a friend is said to boost the luck
Small bell, big protection—ring in safe miles.
Description
At home on v-twin or a high performance sport bike, the classically styled Gripster offers unparalleled dexterity, fit, and grip.
Features:
Top Grain goatskin leather
Padded knuckles, palm, & thumb
Stretch panels at knuckles
Ultra short wrist cuff
Unlined fingers for dexterity and grip
Perforated holes on fingers and fourchettes
Reflective piping
1 year warranty
MEN'S GLOVES Sizing CHART
SIZE:
CIRCUMFERENCE:
Small
6”
Medium
7”
Large
8”
X-Large
9”
2X-Large
10”
3X-Large
11”
Looking for a shirt that shows you’re a true biker? Look no further than the Grouchy Old Biker Back Print T-Shirt. This shirt is the perfect choice to make you stand out that other shirts can’t match. Whether you’re hitting the open road or just hanging out with your buddies, this shirt is sure to make you look and feel like the ultimate badass. So grab one today and let everyone know that you mean business!
GROUCHY OLD BIKER SHIRT SIZING CHART
SIZE
WIDTH
LENGTH
MEDIUM
20"
29"
LARGE
21.5"
30"
X-LARGE
23.5"
31"
2X-LARGE
25.5"
32"
3X-LARGE
27.5"
32"
The Gerbing GT5 Hybrid is two amazing, heated gloves in one clever package. Plug the Gerbing GT5 Gloves into your motorcycle or snowmobile’s 12-volt battery for endless heat while you are out for your ride. Or insert the optional 12-volt Hybrid Gerbing battery into the pocket on the gauntlet cuff for hours of heat when you are away from your vehicle. The GT5 Glove is constructed out of a winning combination of nylon, leather, and soft tricot lining with 150 grams of Thinsulate insulation to help retain the warmth and an Aquatex waterproof and breathable internal membrane to keep your hands drier. The GT5 Hybrid Gloves use Gerbing’s Microwire heating technology which incorporates micro-sized heating fibers to surround your hands with warmth. The GT5 hybrid system allows you the option of powering from your vehicle’s 12-volt electrical system or from Gerbing’s 12-volt Hybrid lithium-ion battery pack (sold separately) with its built-in microprocessor temp controller.
Gerbing 12V GT5 Hybrid Glove Power Options:
Plugged directly into our 12V heated jackets
12V Hybrid Batteries for Portable Use
Hardwire with 12V Battery Harness and Y-Harness (temp controller or on/off switch recommended)
Features:
Motorcycle glove with 12-volt vehicle battery or 12-volt plug-in capabilities.
Compatible with Gerbing 12V Hybrid Battery (SKU G1219U-BAT-859-001-00002)
Nylon back of hand
Premium, supple, drum-dyed aniline cowhide leather on palm
Soft tricot fleece lining
150g 3M Thinsulate insulation
TPU knuckle protection
Padded palm
Heated on both front and back of hand plus along fingers and thumb
Incorporates Gerbing’s Microwire heating technology
Aquatex waterproof and breathable membrane
Elastic wrist with adjustable strap
Gauntlet cuff with drawstring
Touchscreen capable
Gerbing Temperature Controller highly recommended (sold separately)
Two 12V batteries and charger are optional (sold separately)
Lifetime Microwire warranty
Heating Time on 12V Battery Packs: High: 1 HourMedium: 2.5 HoursLow: 4 HoursConnected to Vehicle Battery: Unlimited
Gerbing 12V Glove Technical Specifications:
Battery Harness, Y-Harness & temperature controller required for stand-alone operation (sold separately)
Material: Leather, Nylon, with tricot lining
Max Heat: 135° @ 13W Each
Power: 12V DC 1.1 Amp Each
About the Gerbing 12V Power System: The Core Heat 12 thermovelocity system is powered by a simple connection to your vehicle's DC power system. Core Heat 12 technology connects to your motorcycle, snowmobile, ATV, boat or even airplane to keep you warm at the temperature of speed.Gerbing Microwire Heating: The Microwire system is the most durable and efficient thermo-technology platform ever developed. Products incorporating Microwire technology utilizes patented micro-sized stainless steel fibers intertwined and encased in a proprietary waterproof coating. Gerbing Microwire technology will provide even heating for ultimate comfort.
GT5 12V HYBRID HEATED GLOVES SIZING CHART
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
CIRCUM-FERENCE-OF HAND
8-8.5
8.5-9
9-9.5
9.5-10
10-10.5
11-11.5
The 90WL leather tool bag attaches to the left side of the saddlebag guards on most Harley Touring Bikes 1994 to present, which includes Road King, Road Glide, Street Glide, Electra Glide, Ultra Classic and FLH. The right side is also available, giving you the options of one or both sides. For the driver the left side is more popular, if you carry a passenger you will want both the left and right side. This leather tool bag is great for holding the small things that are should be easily accessible, such as a cell phone, camera, keys, garage door opener and registration. A water bottle holder was added to the front of our popular 90 leather tool bag. The 90W leather tool bag is customizable to match your Leatherworks saddlebags, tool bags, sissy bar bags and other leather accessories. 15" x 7½" x 2½" (H" x L" x D")
Command Your Ride
Stay warm, comfortable, and in control with the Men's Guide Gauntlet Gloves. These gloves are designed to withstand treacherous weather conditions, providing the necessary protection and grip. Experience the ultimate combination of functionality and style with these gloves.
A Glove You Can Count On
For all-weather warriors, the Guide Gauntlet Gloves are the perfect choice. Made with reinforced leather palms, they offer durability for those extra miles. Stay visible in low light with reflective accents. Hook and loop adjustments and a drawstring gauntlet ensure the perfect fit every time.
Key Features
Hard knuckleRugged, lightweight impact protection you can trust.
Drawstring GauntletA perfect seal around your sleeve, every time
Reinforced leather palmAdded grip texture for confident control in wet and dry conditions.
Touchscreen-compatible fingertipOperate your smartphone or GPS without removing your gloves.
Adjustable wrist strapHook-and-loop closure ensures a snug, wind-resistant fit.
Wind and water resistant outer shellDesigned for keeping you warm and dry
Reflective AccentsImproved visibility in lowlight
Why Riders Choose Them
Adjustable waist up to 48"
Premium Tactical Gun Belt (Ratchet Belt System)
Gun & Gear Carry Belt
Heavy Duty Nylon Material
Holds up to 8LBS
40+ Sizing Points (Way More Adjustable)
Locks to Your Exact Waist Size
Cut Extra Belt Length Off (Instructions Included)
Easy Buckle Release Tab
Very Flexible for Daily Comfort
Waist adjustable up to 48"
Premium Tactical Gun Belt (Ratchet Belt System)
Gun & Gear Carry Belt
Heavy Duty Nylon Material
Holds up to 8LBS
40+ Sizing Points (Way More Adjustable)
Locks to Your Exact Waist Size
Cut Extra Belt Length Off (Instructions Included)
Easy Buckle Release Tab
Very Flexible for Daily Comfort
Premium Tactical Gun Belt (Ratchet Belt System)
Gun & Gear Carry Belt
Heavy Duty Nylon Material
Holds up to 8LBS
40+ Sizing Points (Way More Adjustable)
Locks to Your Exact Waist Size
Cut Extra Belt Length Off (Instructions Included)
Easy Buckle Release Tab
Very Flexible for Daily Comfort
Style No. 81008
Premium Tactical Gun Belt (Ratchet Belt System)
Gun & Gear Carry Belt
Heavy Duty Nylon Material
Holds up to 8LBS
40+ Sizing Points (Way More Adjustable)
Locks to Your Exact Waist Size
Cut Extra Belt Length Off (Instructions Included)
Easy Buckle Release Tab
Very Flexible for Daily Comfort
Style No. 81009
Guns Don't Kill People Embroidered 4" 4" x 2" Patch"Guns Don't Kill People, People With Cell Phones Do" in red and white lettering on a black background with white trim and heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Hardly anyone makes riding gear for kids. I like that these will protect her legs from wind and other things. They will protect her in the event of a slide also. Now just need to find her some Kevlar shorts to go under them and protect her behind.
Kids Bolt On Pocket Chaps
Alexander Varg
The backpack is well thought out and highly functional.
Nice backpack. I bought it for my daughter as a birthday present, and she loves it. Being able to change pictures and animations from her phone is a big hit. Overall, the build quality is good. It has two laptop/tablet pockets, three external pockets, and a pair of very useful attachment rings. The backpack is well thought out and highly functional.
The only thing to consider is securing the power bank inside. You can place it in the inner pocket, but we decided to sew in a Velcro patch with a quick-release setup. This keeps it from moving around while still making it easy to remove for charging when needed.
LED Backpack Bag
Dana Roland
Cozy Kevlar with Real-World Fit — Petite-Friendly and Ride-Ready
Eagle Leather’s Women’s Kevlar Sweatpants are exactly what I hoped for in moto pants: soft, incredibly comfortable, and thoughtfully designed for riders. The fabric feels great on long days, and the pockets for hip and knee armor make it easy to add protection without bulk. I’m petite (5'0") and the medium fits perfectly — no awkward dragging or bunching.
I also appreciate the ankle zippers for a clean fit over boots, plus the overall look is stylish and well-made. I initially received the wrong size, but Eagle Leather’s customer service was excellent and fixed it fast. Shipping was timely, communication was clear, and the whole experience felt seamless.
If you want comfortable Kevlar sweats that actually fit petites and still look polished, these are a winner.
Women's Kevlar Sweatpants
Anonymous
Exactly what I was hoping for
Exactly what I was hoping for. Looks amazing. Great quality. Got it in a timely manner
EXO-T520/ ST1400/ R1 AIR FACESHIELD SILVER MIRRORED
Jeff
I went from a 5 to an 8 wearing this.
It was so great to try on every jacket while at the store. Even my dog got to try on a vest, it looked great but she prefers to be a nudist. I am stoked about all the indecisiveness I get to have with this jacket. Do I want the inner vest today or should I take it out? Wanna look a little more puff for the ladies? Just slip the armor into those elbows and shoulders. Is it blazing hot but illegal to be naked where I'm riding? Take it all out and open the zippered vents to get some wind blowing on my body. Oooh yeah, it's gonna feel good to get home safely and take of my pants and jacket.
