The Commuter takes a simple leather jacket and adds some style. Lots of pockets, including conceal carry and armor pockets! This one has the action back for comfort while riding, and an insulated zip out thermal liner in case the temps rise on your ride.
Features:
Runs half size larger
1.2-1.3mm Vintage Naked Cowhide Leather
Center zip style with banded collar
Two vented chest pockets
Two zippered slash pockets
Two conceal carry pockets with tapered holsters
Padded shoulder and forearm detail
Zippered pocket on left arm
Zippered sleeves with gussets and button snap
Adjustable side belts
Action back with zipper exhaust vents
Insulated zip-out thermal liner
YKK zippers
Armor pockets for CE rated armor
The Commuter takes a simple leather jacket and adds some style. Lots of pockets, including conceal carry and armor pockets! This one has the action back for comfort while riding, and an insulated zip out thermal liner in case the temps rise on your ride.
Features:
Runs half size larger
1.2-1.3mm Naked Diamond Cowhide Leather
Center zip style with banded collar
Two vented chest pockets
Two zippered slash pockets
Two conceal carry pockets with tapered holsters
Padded shoulder and forearm detail
Zippered pocket on left arm
Zippered sleeves with gussets and button snap
Adjustable side belts
Action back with zipper exhaust vents
Insulated zip-out thermal liner
YKK zippers
Armor pockets for CE rated armor
The Competition is a perfect warmer-weather jacket - with plenty of vents. This jacket is perfect for a spring bike night and looks great on, and off the bike!Features:
0.8-0.9mm Drum Dyed Naked Cowhide
Center zip style with banded collar
Two vented chest pockets
Two zippered lower slash pockets
Zippered sleeves with gusset
Underarm grommets
Padded elbow design
Lower back side zipper vent
Functional bucked side tabs
Insulated zip-out thermal liner
Two conceal carry pockets with bullet snaps and tapered holsters
Mesh Lining with armor pockets for CE-2 rated inserts
Lifetime warranty on hardware and zippers
Motorcycle Safety Sunglasses
Meets ANSI Z87.1-2010 Standards for use in Industrial Applications
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Gloss Color Frames with Metal Side Piece Design in Blue
Two-Tone Gloss Color Frames with Silver Side Piece Design in Blue
Rubber Ear Pads
Flash Mirror Lenses with Gloss Color Frames in Blue
Flash Mirror Lenses with Two-Tone Gloss Color Frames in Blue
California residents, read the Proposition 65 warning
Motorcycle Safety Sunglasses
Meets ANSI Z87.1-2010 Standards for use in Industrial Applications
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Gloss Color Frames with Metal Side Piece Design in Black or Blue
Two-Tone Gloss Color Frames with Silver Side Piece Design in Blue/Black
Rubber Ear Pads
California residents, read the Proposition 65 warning
Fieldsheer®’s Mobile Cooling® neck gaiter brings cooling comfort no matter your pursuit. Perfect for everyday use, fishing, hiking, camping, gardening, working outdoors, and more, this neck gaiter will cool your core and keep you out longer. Constructed in drirelease® environmentally friendly 90% recycled polyester with powerful UPF 50+ sun protection and effective moisture-wicking technology, this gaiter offers all-day comfort. 4x faster frying than traditional knits, the Mobile Cooling® neck gaiter is ideal for even the hottest conditions.
Lightweight protection with a bite. The Coolskin Balaclava – Saber Tooth gives you breathable coverage for long rides, helping shield your skin from wind and sun while keeping bulk to a minimum under your helmet.
The low-profile design works great on its own or as a base layer, and the convenient hook-and-loop (Velcro) fastening lets you dial in a secure fit in seconds.
Product Highlights
Fabric: Lightweight, breathable construction for all-day comfort
Protection: Helps guard against wind and sun on the road
Closure: Hook-and-loop (Velcro) fastening for quick, secure fit
Helmet Friendly: Slim profile sits comfortably under most helmets
Style: Saber Tooth graphic
Ride cool, ride covered.
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Rubber Nose Pads
Meets ANSI Z87. 1 Standards for Safety Glasses
Smoke Lens with Gloss or Matte Black Frame
The Creators of the original bad-ass Covert Motorcycle Helmet has now developed a full-face version, the Covert FX Carbon!The Covert FX displays the same edgy style and function that is expected from the ScorpionEXO Covert Series. However stylish the details may be, they have important function. Each helmet is carefully hand crafted using the latest 3K Carbon Fiber which provide superior strength and extreme light weight. The low-profile shell has been aerodynamically tuned for motorcycle riding, minimizing both lift and turbulence for a smoother, quieter, and more stable ride.
SHELL:
SHELL
Extremely lightweight TCT-U™ 3K Carbon Fiber shell provides superior strength and impact dispersal properties
CAD-refined aerodynamics result in a streamlined profile and balanced footprint, minimizing both lift and turbulence for a smoother, quieter, and more stable ride
Advanced multi-layer EPS provides superior energy absorption
Equipped with U.S. DOT Certification and the ECE 22.06 Safety standard, which requires a wider range of testing than the previous 22.05 certification
COMFORT:
Aero-tuned ventilation system features closeable intake vents on top help force cool air in, while exhaust vents maximize movement of hot air out of the helmet
Dual Position mouth vent allows the 1st position to act as a defroster and 2nd position acts as defroster & ventilation (closeable from the inside)
Strategically placed channels throughout the EPS foam provide increased airflow
KwikWick® III Comfort Liner features a moisture wicking fabric that keeps you cool and dry in warm weather, and warm in cool weather. Liner Kit is easily removable and washable. Optional Cheek Pads sold separately
KwikFit® 3D sculpted cheek pads accommodate most eyeglasses
VISION:
ScorpionEXO’s face shield ratchet system pulls the shield securely against the eye port, ensuring a proper seal
EverClear® face shield offers state-of-the-art fog-free technology and 95% UV-A and UV-B protection
Optically superior face shield features a shatter resistant, Anti-Scratch hardened coating
FREE Additional Dark Smoke Everclear® fog-free face shield included. (Pinlock® face shields sold separately)
Tool-less face shield removal system
Comm-Ready speaker pockets allow for easily installation of your favorite Bluetooth® communication system speakers
Optional Thinner and Thicker cheek pads available to help optimize fit (sold separately)
Reflective material incorporated into the cheek pads for increased night time visibility
Included solid neoprene aero skirt (chin curtain) helps reduce wind noise
ADDITIONAL SPECIFICATIONSWeight: ± 1,348 grams / 2.9 lbs. (size medium)
Speaker pocket size: Height 50mm x Width 50mm x Depth 7.5mm
2-Shells/ 3 Individual EPS (Expanded Polystyrene) foam
DOT FMVSS No. 218 Certified/ ECE 22.06 Certified
5 Year Warranty
The Scorpion EXO Covert Flannel was designed from the very beginning to protect from abrasion and impact. Additionally all the critical seams have our unique Exo-Stitch® to keep this shirt together if you hit the ground. If you want extra protection from impacts, there are pockets for optional SAS-TEC® CE armor at the elbows, shoulders and back.
Outershell: 100% Premium Cotton
Lining: Fully lined with 100% Genuine DuPont™ Kevlar® Fiber (165 GSM)
SAS-Tec armor pockets for optional elbow, shoulder and back protectors
Quilted Polyester lining
YKK® center front zip
When you don’t want to wear a heavy jacket, but need more than just a t-shirt; that’s where the Scorpion EXO Covert Waxed Riding Shirt comes in. We infused 12oz denim with a unique mixture of micro and technical waxes to make a riding shirt that looks and feels like a classic work shirt. Additionally it is fully lined with abrasion resistant materials for added strength and protection. Exo-Stitch® safety seams and mesh armor pockets at the elbows, shoulders, and back (for optional Sas-Tec® armor) enable you to add protection from impact. Scorpion EXO has combined the best of old and new technologies to deliver style, comfort, and safety.
Outershell: 12oz Premium Wax coated Denim
Lining: Fully lined with 100% Genuine DuPont™ Kevlar® Fiber (160 to 165 GSM)
100% Polyester Mesh lining
Description
The helmet that redefined badass has evolved into the all-New Covert X. Same multi-configuration versatility featuring a refined 1/2 helmet profile, injection-molded LG polycarbonate mask, and lightweight Ultra-TCT composite shell construction resulting in a truly minimalist, no-nonsense package.
Features:
Multi-layered TCT-Ultra shell combines fiberglass, aramid and poly-resin fibers which minimize weight while maximizing strength and impact dispersal
Advanced multi-layer EPS provides superior energy absorption and channels for increased airflow
Unique multi-configuration design featuring removable front mask and rear comfort sleeve results in 3 distinct riding configurations: Full Mode, 3/4 Mode and 1/2 Mode
Subtly integrated forehead vent intakes
Dark smoke EverClear anti-fog sun shield installed
Anti-scratch coated and offers 95% UV-A & UV-B protection
FREE Clear EverClear anti-fog and anti-scratch coated face shield included
Removable/washable KwikWick III anti-microbial interior keeps you cool, dry and comfortable
Included cold weather ear covers with integrated speaker pockets to accommodate Bluetooth communication system speakers (when used in 1/2 helmet Mode)
Block-off plates included for use in 3/4 Mode
Optional Mask styles available (sold separately)
DOT FMVSS No. 218 Certified
5 Year Warranty Through Scorpion
HELMET SIZING CHART
SIZE
INCHES
CM
HAT SIZE
Small
21 5/8 - 22
55 - 56
6 7/8 - 7
Medium
22 7/16 - 22 3/4
57 - 58
7 1/8 - 7 1/4
Large
23 1/8 - 23 5/8
59 - 60
7 3/8 - 7 1/2
X-Large
24 - 24 3/8
61 - 62
7 5/8 - 7 3/4
2X-Large
24 3/4 - 25 3/16
63 - 64
7 7/8 - 8
Synthetic leather.
Snap on crash bar bag.
Front pocket to fit your personal items.
Left side bag.
Easy snap on attachment.
Left Side Synthetic Leather Crash Bar Bag
Color: Black
Size:
Pouch: 10’’ x 7’’ x 4’’
Total Length: 15’’ x 6’’
Description
"CRASHING SUCKS" embroidered in white lettering on a black background with heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs! Heat-sealed backing for easy iron-on application.
Description
The Cross and Roses Patch features a highly detailed cross and roses design and has heat sealed backing for easy iron-on application. All patches are designed in the USA and feature original artwork you will not find anywhere else. High thread count embroidery contributes to high quality and long lasting durability of our superior patches! Unmatched when it comes to bright colors and intricate, incredible designs, our patches are created for easy sewing onto your favorite jacket or vest. Customize your gear with one of our embroidered patches. We guarantee you’ll find a favorite amongst our many designs!
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
A complete travel tool kit solution for Harley Davidson motorcycles, the CruzTOOLS RoadTech H3 includes top-grade combination wrenches, an adjustable wrench, locking pliers, tire gauge, hex & torx keys, 6-in-1 screwdriver and a mini ratchet and socket set. The kit is rounded out with a spark plug socket, cable ties, mechanics wire, and duct tape. Exactly what you need for roadside repairs & adjustments and organized with a heavy-duty roll-up pouch and a Lifetime Guarantee – no questions asked!
Inspired by Bell's very first production helmet in 1954, the Custom 500 is newly refined with an oval design and low-profile fit, giving it that smaller look you want with the same throwback style.
The CWR-F2 Pinlock® Ready Face Shield for SHOEI RF-1400 and X-Fifteen Helmets offers superior visual clarity, UV protection, and noise reduction, with a tool-free quick-change mechanism for convenience.
UV filter: >99%
Compatible with the Pinlock® CWR-F2/CWR-F2R Lens Insert
Conformity ECE-R 22.06: Yes
The CWR-F2 Pinlock® Ready Face Shield is engineered for SHOEI RF-1400 and X-Fifteen helmets, offering premium optical clarity and protection. Advanced 3D injection molding delivers a wide, distortion-free view, while UV filtering blocks 99% of harmful rays. Integrated Vortex Generators improve aerodynamics and reduce wind noise, and a reinforced structure maintains shape under pressure. A center tab allows quick adjustments, and SHOEI’s tool-free quick-change design makes replacement simple.Compatible with the Pinlock® CWR-F2/CWR-F2R Lens Insert (sold separately) to help prevent fogging in a wide range of conditions.
Description
HJC has created a true youth helmet with the CL-Y. The youth-size polycarbonate shell provides a lightweight helmet, with superior fit and comfort using advanced CAD technology. An integrated ventilation system enhances cooling airflow. The large eye port design allows for maximum visibility and hosts a flash-mounted shield ratchet system that is simple and easy to use when changing the shield.
Features:
True Youth Size Polycarbonate Shell: Lightweight, superior fit and
comfort using advanced CAD technology
Integrated Ventilation System: Provides cooling airflow
Large Eye Port Design: For maximum visibility
Flush-mounted Shield/Ratchet System: Simple and easy to use
Plush, Nylex ® Interior: Washable and Removable
DOT approved
Available Sizes: YOUTH S/YOUTH M/YOUTH L
3 year manufacturer warranty
REPLACEMENT PARTS SOLD SEPERATELY
HJ-05 shields
Vents
Gear Pate Set
Chin Curtain
Head Liner
Cheek Pad
Shield Options
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
Hj-05 Standard Shield
D30 Ghost Elbow/Knee protectorsCE-certified elbow and knee protection for bikers• Developed from patented D30® technology• Provides the quality and toughness you expe ct from D30®• Low profile design to keep you aerodynamic• Incorporates airwave technology for improve d
D3O® Ghost™ is the thinnest and most flexible limb protector range from D3O, exceeding CE Level 1 certification.Designed as fit and forget armor for use in motorsports and mountain bike, D3O® Ghost™ is made with the revolutionary new D3O® Impact Print™ technology which allows for unrivalled freeform geometry and flexibility.PRODUCT FEATURES:
D3O® patented technology
Certified to exceed performance requirements of EN 1621-1:2012 (Level 1) in ambient and wet
UKCA certified
Type A coverage
Superior breathability and low profile design
Market-leading flexibility, with geometry which conforms to the limb, fitting perfectly against the body
Simple integration into garments through hook and loop attachment space
Product orientation depends on user preference, fabric facing outward ensures reduced read-through.
Everything you need to bring D30 Level 2 protection to your new riding jacket!
Included: CE Level 2 Back Protector, 1 Pair CE Level 2 Elbow Armor, 1 Pair CE Level 2 Shoulder Armor
Description
The D3O® LP2 utilizes the latest material innovation from D3O® which offers increased durability while offering great impact protection whilst remaining low profile and lightweight. The new highly vented geometry offers a 45% improvement in breathability.
Features:
CE LEVEL 2
Elbow Impact Protector Tested and Certified According to Standard EN 1621-1:2012, Level 2, T-, T+
D3O® LP2 Limb Protectors are the most advanced, breathable protection for motorcycle and mountain bike.
The LP2 range includes knee, hip, elbow and shoulder pads, all of which are CE certified to Level 2 for ambient, wet, hot and cold conditions
TESTED AND CERTIFIEDEN 1621-1:2012, Level 2, T-, T+
BREATHABLEHighly ventilated geometry offers a 45% improvement in breathability
Description
The TrailGuardian Heavy-Duty Textile Motorcycle Pet Carrier lets you safely take your furry friends with you on your rides. It's made from tough fabric and has breathable mesh panels, ensuring both comfort and good airflow for small pets. Additionally, there are several outside pockets where you can stash treats, toys, and other travel essentials. The adjustable straps and clips make it easy to attach to your bike, and its sturdy build holds up well against road bumps and the elements. Thoughtfully designed for stability and ease of use, the TrailGuardian pet carrier helps keep your pet calm and secure while you enjoy every mile together. It's an awesome pick for riders who love hitting the road with their pets.
Key Features:
Durable PVC Material
Three Outside Bonus Storage Pockets
Universal Adjustable Strap & Clips for Easy Mounting
Heavy Duty Mesh Breathable Panels
Extra Zipper Top Loader Opening
This zipper was created to allow wearers of our Modern Firefighter to get in and out of their boots easily. Once the zipper has been installed using the boot's laces you’ll be able to insert or remove your foot from the boots in a matter of seconds.
Zipper Sizing
MEDIUM: Men's 5 - 10.5LARGE: Men's 11 - 12X-LARGE: Men's 13 - 15.
When the Open Road Calls
Danner consulted with motorcycling experts to create the Danner Moto, our first-ever motorcycle boot. The durable 5.5 ounce leather upper has an extra layer of leather at the toe and a medial clutch guard that stands up to wear and tear. D3O® foam inside the collar is light and flexible but stiffens upon impact to help keep you protected. The flat wedge offers sure-footedness on the pegs.
Full-Grain Leather Upper
To ensure its quality, we put our leather through six different tests before making our selection. Our full-grain leathers are the strongest and most durable form of leather.
Extra Thick Leather UpperThis boot is built with a strong and durable leather upper that stands up to hard wear.
GORE-TEX (GTX)100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
Medial Clutch GuardAn added layer of leather on the medial side resists abrasion.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Made in USA
This classification of manufacturing is our promise that this product was built from top to bottom in our Portland, Ore. factory. Our USA Made boots are built with the same commitment to superior craftsmanship that we’ve been known for since 1932.
The perfect crossover jacket with a bold look that you'll want to wear on and off the bike.
Features:
Lightweight twill body with leather sleeves
Club style with banded snap collar
Snapped wrist closure with gussets
Center front zipper
Single zippered chest pocket
Two zippered slash pockets
Two concealed carry pockets with tapered holsters
Black reflective piping along arm, back and shoulder seams
Mesh lining
YKK zippers
Pockets for CE Level 2 shoulder, elbow and back armor (sold separately)
