Description
Heat-sealed backing for easy iron-on application.
Features:
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally rest itch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Motorex Protex is a high-quality, silicone-free protectant for textiles and leather.
Provides long-lasting protection against moisture and oil
Allows fabric to breathe naturally
Offers waterproofing for both textiles and leather
Replacement cradle for securely mounting your Cardo Packtalk Pro or Edge communicator to your helmet.
SPECS
Compatible with Cardo Packtalk Pro and Edge models
Securely mounts your communicator to your helmet
Ideal replacement for damaged or worn cradles
Quick and easy installation with Cardo’s click-in design
Genuine Cardo part for a perfect fit and reliable hold
DESCRIPTION
The Cardo Packtalk Pro/Edge Cradle is a genuine replacement part designed to keep your communicator securely in place. Whether you're replacing a damaged cradle or adding a second setup to another helmet, this cradle ensures a solid, reliable fit for your Packtalk Pro or Edge device. Built for quick installation, it’s part of Cardo’s complete mounting system—just click your unit in and you’re ready to ride.
Purple Slice The Ultimate Finish in one easy step! Just wipe. Purple Slice is a revolutionary liquid with many uses on vehicles, office and home. It gives a brilliant streak free shine instantly while cleaning bugs, dirt, and grime. Works on paint, chrome, plastic, glass, motorcycle windshields, helmets, stainless steel, fiberglass, carbon fiber, LCD screens, mirrors, granite countertops, phones, tablets, glasses, and finished wood, plus much more. Leaves no streaks or residue. Won’t turn white if it’s let dry. Just again and wipe. Works best with a microfiber towel.
Ultimate Cleaner by Purple Slice is a revolutionary type of all purpose cleaner designed specifically for the toughest of oils and grease soils. Contains no amomonia, no bleach, nor acid. Works great on white-wall tires, rubber and grease. Can also be used on painted surfaces to remove extremely tough water spots, however may also remove wax. Our strongest cleaner EVER! Perfect for washable surfaces Can be diluted to desired strength WARNING: Product may cause streaking if left unattended of certain surfaces. Always test in a hidden area to ensure desired result.
Dimensions - 13" x 6.25" x 10"
Gun Holster in Each Bag with Elastic Straps
Zipoff bag with Heavy Duty Velcro Cover and Lock
Universal Fitting
Includes a hard sheet inside the box with 4 pockets
Heavy Duty Quick Release
100% Waterproof
UV protected and it will not turn white in extreme heat
Bag Holds its Shape
4 Tie down ribbons on each side for extra security
Not a cooler bag. Not intended to use with water & ice
Gun Holster Included
Shipping weight 19.8 pounds
Go wireless with CarPlay or Android Auto using the Quad Lock Wireless Adaptor—no more plugging in cables.
SPECS
Wireless connection for Apple CarPlay and Android Auto
Simple USB plug-in setup with automatic phone pairing
Connects instantly when you start your vehicle
Stream music, use maps, and access calls hands-free
Easily switch between multiple phones via Bluetooth
Compatible with head units equipped with wired CarPlay or Android Auto
Lock down your big phone with confidence. The RAM® Quick-Grip™ XL Mount with U-Bolt Base delivers a rugged, secure hold for oversized phones, GPS units, and even small Bluetooth speakers. With spring-loaded tension and adjustable side supports, you get a snug fit that’s easy to load and unload with one hand—even while geared up.
This kit includes a zinc-coated U-Bolt base that fits handlebar rails from 0.5" to 1.25" in diameter, plus a short double socket arm for near-infinite adjustability. Built from marine-grade aluminum and high-strength composite, this mount is designed to handle rough roads and harsh weather without letting go. Rubber caps and spacers are included to protect your bars and ensure a clean fit.
Engineered for strength, made for riders, and backed by a lifetime warranty.
XL Design: Secure fit for large phones, GPS units, and similar devices
Easy Use: One-hand device insert and removal
Clamp Range: U-Bolt fits 0.5"–1.25" diameter rails
Adjustability: Short RAM® double socket arm, 1.75" socket-to-socket length
Device Dimensions: Height 5.75"–7.25"; Width 2.625"–3.625"; Depth up to 0.72"
Weight Capacity: 2 lbs standard use, 1 lb heavy-duty use
Construction: Marine-grade aluminum & high-strength composite
Ball Size: B Size (1")
Weight: 0.8 lb
Warranty: Lifetime guarantee
Part Number: RAM Quick-Grip™ XL w/ U-Bolt
The ICON Raiden™ Level 3 Waterproof pants are the premier accompaniment to the ICON Raiden™ Jacket. Comprised of a Supplex® 3-layer nylon shell with 10k/10k Waterproof breathability as well as durable Cordura® overlays the result is a bombproof riding pant that can go the distance. The ICON Raiden™ pant features full seam sealing and full-leg waterproof YKK® zippers. A full complement of D3O® impact protectors - both hip and knee (3 positions) offer coverage. Cargo storage pockets, belt loops, sizeable technical Hook & Loop lower leg adjustment with a waterproof gutter system, and retro-reflective hits - the Raiden™ Pant has all the necessary features to facilitate your big-time adventure desires
Features:
Made from 100% waterproof polyester with PVC backing
Worn over your shoes or boots to protect them from rain and moisture
Designed to be worn under pants or chaps
Reflective binding helps with night visibility
Rubberized 1/2 sole for strength and durability
Sized to fit most shoes and boots M - XL
Features:-
Jacket has a removable collar/hood eliminating a bulky neck
Mesh lining to keep you cool & dry
Wide 3 1/2 inch reflective stripe on back for safety, which conceals an air vent for comfort
Pants have stirrups plus removable suspenders
Elastic waist band
Heat resistant material on inner calves
Bottom of pants open & close with Velcro
Small stuff sack for storage.
RAIN SUIT BLACK SIZING CHART
SIZES
CHEST (IN)
SLEEVE LENGTH (IN)
JACKET WAIST (IN)
PANT WAIST (IN)
INSEAM (IN)
SMALL
52
35.5
23
43-43
31
MEDIUM
56
37
26-50
46-46
33
4X-LARGE
65
41
42-59
62
36
National Cycle RainZip Rain RepellentRide safer with a visor that stays clearer in rainy weather. RainZip is hydrophobic, meaning it repels water by beading it up and blows away with wind.• Rain Zip is a rain repellent treatment that beads water on the windshield• Once you are cruising the rain runs off the windshield so you can see through the shield• It is formulated for Quantum hardcoded polycarbonate windshield but is also safe for all windshields• Kit includes 3 oz. bottle of Rain Zip, application cloth, and microfiber polishing cloth
Consists of a 3.3in. twist lock suction cup base that is connected to the RAM-B-238U diamond base with 1in. rubber ball. The suction cup is designed to have an
Strong hold, easy setup. The RAM® 3.3" Twist-Lock™ Suction Cup with 1" Ball is designed for riders and drivers who need a reliable mount that grips hard on smooth, non-porous surfaces. Just twist the lock and this suction cup delivers an extra-strong hold—perfect for windshields, glass, and non-porous plastics.
Connected to a RAM® diamond base with 1" “B” size rubber ball, this setup integrates with any RAM® double socket arm, giving you near-infinite adjustability. Built from high-strength composite and marine-grade aluminum, it’s made to perform in tough environments without letting go.
Fast to mount, strong to hold, and backed by a lifetime warranty.
Base: 3.3" Twist-Lock™ suction cup for strong, reliable grip
Surface Use: Ideal for windshields, glass, and other non-porous surfaces
Connection: Diamond base with 1" “B” size rubber ball
Compatibility: Works with any RAM® B size double socket arm
Adjustability: Ball-and-socket system for near-infinite angles
Construction: High-strength composite & marine-grade aluminum
Warranty: Lifetime guarantee
extra strong hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface.
Features
RAM® Twist-Lock™ suction cup base is ideal for vehicle windshields and other nonporous surfaces
Includes diamond ball base compatible with any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability
Made of high-strength composite and powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty*
Keep your drink steady, no matter the ride. The RAM® Large Cup Holder with Tough-Claw™ Base (RAM-B-132-400U) combines the self-leveling RAM® Level Cup™ with the quick-attach Tough-Claw™ clamp, giving riders the ultimate drink holder for the road.
Designed with two pivot points, the Level Cup™ keeps your beverage upright—even when leaning into corners or riding rough terrain. It fits cups, cans, bottles, and mugs from 2.5” to 3.5” in diameter and comes with a RAM® koozie to keep drinks insulated. The integrated eyelet and hook provide an optional tethering feature, securing small or open containers in extreme conditions.
The Tough-Claw™ base allows for fast, tool-free installation and removal on round, square, flat, or irregular surfaces. Compact and versatile, this setup works on motorcycles, ATVs, boats, wheelchairs, and more—wherever the ride takes you.
Easy to mount, tough enough to last, and built to ride with you.
Includes: RAM® Level Cup™ Self-Leveling Holder + Tough-Claw™ Base
Self-Leveling: Dual pivot points keep drinks upright
Size Range: Holds 2.5”–3.5” cups, cans, bottles, or mugs
Extras: RAM® koozie included
Clamp Range: Attaches to round, square, and flat surfaces
Rotation: 360° adjustable angles
Secure Fit: Optional tether for open containers
Part Number: RAM-B-132-400U
Keep your drink upright, no matter the road. The RAM® Level Cup™ Self-Leveling Drink Holder is the rider-favorite solution for staying refreshed without spills. Whether you’re on a motorcycle, ATV, big rig, or even a riding mower, this cup holder keeps your beverage steady through every turn.
Designed with a unique self-leveling feature, the Level Cup™ adjusts to stay upright—even on sharp corners or bumpy rides. It fits cups, cans, bottles, and mugs from 2.5" to 3.5" in diameter, and includes a RAM® can insulator to keep drinks cold. The integrated eyelet and hook provide an optional tethering point, securing open containers in extreme conditions.
Easy to install, built tough, and backed by RAM®—this drink holder is ready for the ride.
Self-Leveling Design: Keeps drinks upright on turns and bumps
Size Range: Fits 2.5”–3.5” cups, cans, bottles, or mugs
Extras: Includes RAM® can insulator (koozie)
Secure Fit: Integrated eyelet and hook for optional tethering
Mounting: 1" Rubber Ball “B” size (RAM-B-132BU)
Versatility: Works with motorcycles, ATVs, big rigs, and more
Provides an extended reach with an overall length of 6" and a socket-to-socket length of 5.31"
Attaches to any B size RAM® ball component, including mounting bases and device holders; double ball and socket technology allows for near-infinite adjustability of your RAM® mounting system
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Features:
Standard length double socket arm
A socket at both ends that accommodates 1" ball bases
A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection
This socket technology allows for almost infinite adjustment and perfect viewing angles
Specifications:
Overall Length: 3.69"
Socket-To-Socket Length: 3"
RAM Motorcycle Handlebar Clamp Base with M8 ScrewsHave an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there! Included with Purchase: (1 QTY) 1" Rubber ball(1 QTY) M8 x 55 bolt (1.25 thread pitch)(1 QTY) M8 x 60 bolt (1.25 thread pitch)(1 QTY) M8 x 65 bolt (1.25 thread pitch)Compatible Motorcycles: Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.RAM-B-367U
Lock it in, ride with confidence. The RAM® Quick-Grip™ Mount with 1" Ball gives riders a tough, reliable way to secure their large phone or device. With spring-loaded tension and adjustable side supports, this mount delivers a snug fit that’s easy to load and unload with just one hand.
Built from powder-coated, marine-grade aluminum and high-strength composite, the Quick-Grip™ is designed for durability in the harshest riding conditions. The included 1" “B” size rubber ball connects to any RAM® double socket arm, giving you nearly infinite adjustability for the perfect viewing angle.
Engineered for strength, built for riders, and backed by a lifetime warranty.
Secure Grip: Spring-loaded holder with adjustable side supports
Easy Use: Insert and remove device with one hand
Compatibility: Fits most large phones and devices
Adjustability: 1" “B” size rubber ball for near-infinite angles
Construction: Marine-grade aluminum and high-strength composite
Warranty: Lifetime guarantee
Big phone? No problem. The RAM® Quick-Grip™ XL Mount with 1" Ball is built for riders who use oversized phones and need a secure, rugged mount that won’t let go. With spring-loaded tension and adjustable side supports, this XL version ensures a perfect fit for today’s larger devices—while still letting you insert or remove your phone with one hand.
Made from powder-coated, marine-grade aluminum and high-strength composite, the Quick-Grip™ XL stands up to tough riding conditions. The included 1" “B” size rubber ball connects with any RAM® double socket arm, offering near-infinite adjustability so you can set your screen exactly where you want it.
Secure your big phone and hit the road—backed by a lifetime warranty.
XL Design: Built to fit larger phones and devices
Secure Grip: Spring-loaded holder with adjustable side supports
Easy Use: One-hand insert and removal
Adjustability: 1" “B” size rubber ball for custom viewing angles
Construction: Marine-grade aluminum and high-strength composite
Warranty: Lifetime guarantee
Bigger cups, no spills. The RAM® XL Cup Holder with Tough-Claw™ is designed to handle oversized insulated bottles, steel coffee mugs, and tall water containers without losing a drop. With RAM’s refined self-leveling design, your drink stays upright no matter how rough the ride gets.
This kit includes the Level Cup XL cradle with an integrated Tough-Claw™, making installation and removal fast and tool-free. The oversized opening and adjustable bottom piece accommodate bottles and cups from 12–32 oz, while rubber support fins flex to fit different sizes securely. Perfect for motorcycles, ATVs, boats, or wheelchairs, the RAM® XL Cup Holder adapts to almost any bar or rail setup.
Stay hydrated, stay steady—built tough and ready to ride.
Drink Size: Holds 12–32 oz cups, bottles, or mugs
Self-Leveling: Dual-pivot design keeps drinks upright
Clamp Range: Fits bars 0.625"–1.14" diameter
Mounting: Integrated Tough-Claw™ for quick, tool-free install
Adjustable Fit: Oversized opening + movable bottom piece
Extras: Includes 3 rubber support fins + glue tube
Weight Capacity: 2 lbs (standard), 1 lb (heavy-duty)
Use Cases: Ideal for motorcycles, ATVs, boats, or wheelchairs
Low profile, big adjustability. The RAM® Short Double Socket Arm (“A” Length) is the most compact B size arm in the RAM® lineup, giving you 2.42" of overall length with a 1.75" socket-to-socket span. Perfect for riders who want a tight, streamlined mount without sacrificing adjustability.
Designed for use with any B size 1" RAM® ball base, holder, or adapter, this short arm uses the patented ball-and-socket system to provide near-infinite viewing angles. Built from marine-grade aluminum with a powder-coated finish, it’s rugged enough for motorcycles, boats, ATVs, and more.
Compact, durable, and backed by a lifetime warranty.
Overall Length: 2.42"
Socket-to-Socket: 1.75"
Ball Size: B Size (1")
Compatibility: Fits all B size bases, holders, and adapters
Adjustability: Ball-and-socket technology for infinite angles
Weight Capacity: 2 lbs (standard use), 1 lb (heavy-duty)
Construction: Powder-coated, marine-grade aluminum
Weight: 0.22 lb
Warranty: Lifetime guarantee
Part Number: RAM-B-201U-A
RAM® Torque™ 1 1/8" - 1 1/2" Diameter Handlebar/Rail Base with 1" BallThe RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.Mounting Base Dimensions:Accommodates rails 1 1/8" to 1 1/2" in diameterRAM-B-408-112-15U
Secure your mount on the bars that matter. The RAM® Torque™ Handlebar Base with 1" Ball is built for riders who need a reliable foundation for their phone, GPS, or accessory mounts. Designed for handlebars 0.75" to 1" in diameter, it delivers a solid grip even in high-vibration environments.
The kit includes sizing inserts to ensure a snug fit while protecting your bars from damage, plus nylon-insert lock nuts that prevent loosening on rough rides. Constructed from powder-coated, marine-grade aluminum, this base is engineered for strength, durability, and long-lasting performance on the open road.
Lock it in once and ride with confidence—backed by a lifetime warranty.
Mount Type: Handlebar base with 1" “B” size rubber ball
Clamp Range: Fits bars 0.75"–1" in diameter
Secure Fit: Includes sizing inserts + nylon-insert lock nuts
Durability: Marine-grade aluminum, powder-coated finish
Compatibility: Works with RAM® B size double socket arms
Weight Capacity: 2 lbs (standard), 1 lb (heavy-duty)
Hardware Included: Screws, Nylock nuts, bushings, rubber strip, hex key
Weight: 0.26 lb
Warranty: Lifetime guarantee
Mount anything, anywhere. The RAM® Tough-Claw™ Mount with 1" Ball is the quick and reliable way to secure your gear to round, flat, or even odd-shaped surfaces. Built for riders who demand strength and flexibility, it installs in seconds and holds strong ride after ride.
Made in the U.S.A. from high-strength glass-filled nylon and corrosion-resistant stainless steel hardware, this mount is tough enough for any road. Rubber pads protect your surfaces while providing a stable, slip-free grip. The included 1" “B” size rubber ball integrates seamlessly with other RAM® mounting components, giving you unlimited options for customization.
Clamp it, mount it, and ride with confidence—backed by a lifetime warranty.
Durable Build: Glass-filled nylon with stainless steel hardware
Grip Protection: Rubber pads stabilize and prevent scratches
Versatile Clamp: Works on round, flat, and irregular shapes
Quick Use: Installs and removes in seconds
Ball Size: 1" Rubber Ball “B” Size for RAM® components
Warranty: Lifetime guarantee
Origin: Made in the U.S.A.
Weight: 0.35 lbs.
This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5"--- 1.10" at the following intervals:Metric12mm14mm16mm18mm20mm28mmStandard.5".55".63".71".79"1.10Material:Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength CompositeBall Size:1" Rubber Ball "B" SizeNote:Certain motorcycles require adding electrical tape to the area of the plug that is the largest diameter until it fits snugly in the stem. RAM recommends that you review the installation instructions for this part prior to ordering. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.Weight:0.6 lbs.
Secure your device the right way. The RAM® X-Grip Motorcycle Mount is built tough for riders who need their phone or GPS locked in and easy to see on every ride. With a rustproof design and rugged construction, it’s the mount serious riders trust.
Made from high-strength composite, marine-grade aluminum, and stainless steel, this mount is ready for the open road and extreme environments. The spring-loaded X-Grip cradle expands and contracts for a perfect fit, while rubber-coated tips keep your device firmly in place without scratching. Multiple adjustment angles let you set your screen exactly where you need it, and the included tether provides added security in open cockpit setups.
Ride with confidence—your device stays put, no matter the road ahead.
Rustproof: Built for long-term durability
Construction: High-strength composite, stainless steel, and marine-grade aluminum
Cradle: Spring-loaded X-Grip expands and contracts for a custom fit
Grip: Rubber-coated tips hold device securely and prevent scratches
Adjustability: Socket technology allows multiple viewing angles
Extra Security: Tether included for extreme conditions
Warranty: Backed by a lifetime warranty
Origin: Made in the U.S.A.
Size: 1" Rubber Ball “B” size
Weight: 1.1 lbs.
The classic RAM® X-Grip®—slim, secure, and proven. The RAM® X-Grip® Small Phone Holder features the signature spring-loaded “X” design that expands and contracts for a perfect fit. Built from stainless steel and high-strength composite, it holds your phone tight without covering the screen—so your device stays fully functional and easy to access.
Designed to fit phones from 1.875" to 3.25" wide and up to 0.875" deep (with or without a case), this cradle connects to any B size 1" RAM® double socket arm and mounting base. The ball-and-socket system gives you near-infinite adjustability for the perfect viewing angle, while also damping vibration to extend your phone’s life. For outdoor use, the included tether adds extra security for peace of mind on rough rides.
Trusted by riders everywhere—engineered to hold strong, ride after ride.
Design: Spring-loaded “X” cradle with rubber caps for grip
Device Fit: Width 1.875"–3.25"; Depth up to 0.875"
Compatibility: Works with all B size 1" RAM® double socket arms
Adjustability: Ball-and-socket system for infinite angles
Extras: Includes optional safety tether + glue tube for caps
Durability: Stainless steel & high-strength composite
Weight Capacity: 2 lbs (standard), 1 lb (heavy-duty)
Weight: 0.25 lb
Warranty: Lifetime guarantee
Part Number: RAM-HOL-UN7BU
Chassis is a blend of water-resistant waxed cotton & Dyneema, the world’s strongest fiber, for great abrasion protection
Fully lined with Syncromesh™, high tenacity abrasion-resistant mesh, for added protection
Low profile, removable shoulder and elbow armor is impact tested and CE certified, level 1
Front opening uses both zipper and snaps for added security
Comes with a CCW pocket with muzzle holder to keep your friend close by
Durable YKK® brand zippers and antiqued hardware
Urban-touring helmet with an elegant and functional design. The shell is made from our proprietary HPTT, a lightweight material that offers the best balance between performance and durability. Perfect for commuting or touring, thanks to its excellent aerodynamic design.
