Valiant II Blackout Modular

Description

SPECIFICATIONS

- Ultra-light, strong yet flexible shell using LS2’s proprietary Kinetic Polymer Alloy (KPA)
- Twin Shield System drop down sunshield is operated by a cable slider for smooth and dependable sun protection
- Chin bar flips 180 degrees allowing the rider to easily swap between a full face or open face helmet
- Removable, washable Thermo Form comfort padding is made of a breathable fabric that wicks moisture and dries quickly keeping the rider cool and comfortable
- Meets or exceeds DOT FMVSS 218 standards


HELMET SIZING

Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.

Size Centimeters Inches
X-Small 53-54 cm 20 7/8 - 21 1/4
Small 55-56 cm 21 5/8 - 22 7/8
Medium 57-58 cm 22 1/2 - 22 7/8
Large 59-60 cm 23 1/4 - 23 5/8
X-Large 61-62 cm 24 - 24 3/8
2X-Large 63-64 cm 24 3/4 - 25 1/4
3X-Large 64-65 cm 25 5/8 - 26
4X-Large 66-67 cm 26 3/8 - 26 3/4

Before You Select a Size: Helmet-Fit Facts

A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.

  • Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
  • A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
  • When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
  • Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
  • Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.

Why Come to Eagle Leather for a Helmet Fitting?

Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.

For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

Read more

Valiant II Blackout Modular

Product form

$379.98  $269.98

Valiant II Blackout Modular is an LS2 modular motorcycle helmet with kinetic polymer alloy construction for commuting, touring, and street riding. Read more

  • 1-Year Eagle Leather Warranty

Out of stock, Call (253) 581-3220 for availability

    • Guaranteed secure & safe checkout.

      shop pay

    Estimate Your Delivery Date

    Features & Details
    • Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
    • A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
    • When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
    • Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
    • Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.
    Specifications
    • Model: Valiant II
    • Helmet style: Modular
    • Shell material: Kinetic Polymer Alloy
    Fit & Sizing Guide

    Measure around the widest part of the head and compare the result with the LS2 size chart for this exact model. A new helmet should feel evenly snug without isolated pressure points and should not rotate independently of the head.

    Valiant II Blackout Modular is an LS2 modular motorcycle helmet with kinetic polymer alloy construction for commuting, touring, and street riding.

    Description

    SPECIFICATIONS

    - Ultra-light, strong yet flexible shell using LS2’s proprietary Kinetic Polymer Alloy (KPA)
    - Twin Shield System drop down sunshield is operated by a cable slider for smooth and dependable sun protection
    - Chin bar flips 180 degrees allowing the rider to easily swap between a full face or open face helmet
    - Removable, washable Thermo Form comfort padding is made of a breathable fabric that wicks moisture and dries quickly keeping the rider cool and comfortable
    - Meets or exceeds DOT FMVSS 218 standards


    HELMET SIZING

    Measuring your head for helmet fitment is the right place to start, but it is only a guideline. Different shapes of heads might require a slightly smaller or larger helmet in any given model. Trying on the model you are interested in is always recommended. A helmet should be as snug as possible, without being so tight that it will give you a headache. It’s best to be fitted by a professional.

    Size Centimeters Inches
    X-Small 53-54 cm 20 7/8 - 21 1/4
    Small 55-56 cm 21 5/8 - 22 7/8
    Medium 57-58 cm 22 1/2 - 22 7/8
    Large 59-60 cm 23 1/4 - 23 5/8
    X-Large 61-62 cm 24 - 24 3/8
    2X-Large 63-64 cm 24 3/4 - 25 1/4
    3X-Large 64-65 cm 25 5/8 - 26
    4X-Large 66-67 cm 26 3/8 - 26 3/4

    Before You Select a Size: Helmet-Fit Facts

    A helmet is one of the most important pieces of riding gear you will choose, and the size printed on the label is only a starting point. Head circumference, head shape, crown contact, cheek-pad pressure and the retention system all affect whether a helmet fits correctly. Two helmets marked the same size can fit very differently—even within the same brand.

    • Measure around the widest part of your head, keeping the tape level and approximately one inch above your eyebrows.
    • A new helmet should feel evenly snug around the entire head without sharp or painful pressure points.
    • When you move the helmet gently from side to side, your skin should move with the liner rather than the helmet sliding independently.
    • Fasten the retention system and confirm that the helmet cannot roll forward or lift off the head.
    • Wear the helmet for several minutes before deciding. Comfort padding may settle with use, but an incorrect shell shape or painful pressure point is unlikely to be solved by choosing blindly.

    Why Come to Eagle Leather for a Helmet Fitting?

    Our staff is trained to help with helmet fitting and can help you compare head shape, size, pressure points and retention across different models. Inventory changes daily, but Eagle Leather consistently carries many hundreds of helmets—often approaching 1,000 units—across half-shell, open-face, modular, adventure and full-face styles. That selection gives you the opportunity to compare brands and internal shapes instead of relying on a size label alone.

    For such an important piece of riding gear, we encourage you to visit Eagle Leather for an in-person fitting before selecting a size without trying the helmet on.

    Read more

    Specifications

    Helmet styleModular
    Internal sun visorYes
    MaterialKinetic Polymer Alloy
    Riding purposeStreet, Touring

    Recently viewed products

      Footer image

      © 2026 Eagle Leather, Powered by Shopify

        • Amazon
        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • PayPal
        • Satispay
        • Shop Pay
        • Visa