Fully insulated, waterproof, windproof, breathable
Long gauntlet chassis for extreme conditions
3M Thinsulate insulation
For Maximum warmth performance without the bulk,
200 grams in top hand and thumb,
100 grams in palm and fingers for extreme conditions
Waterpoof, breathable HiPora membrane liner provides ultimate barrier against water, snow and wind
Silicone goggle wiper on left index finger
MEN'S PIVOT GLOVES BLACK/WHITE SIZING CHART
SIZE
INCHES
SMALL
9 1/2"
MEDIUM
9 2/4"
LARGE
10"
X-LARGE
10 1/2"
2X-LARGE
10 2/4"
3X-LARGE
11"
Description:-FirstGear's Gen4 Heated Pant Liner warms you in seconds, yet are designed to feel like part of you. Form-fitting, for optimum heat transfer to the body. The garment is durable, hand washable, and extremely lightweight. This version uses Gelanots, a breathable and waterproof stretch fabric in the front to block the wind, as well as a wicking effect when wearing jeans or other porous pants. The new "soft heat" heating panels have soft and flexible carbon shape for maximum heat transfer. All this efficiency means less insulation and power is required to deliver and retain the desired heat. The use of stretch Gelanots in front, works as a wind stop and the anti-bacterial, moisture management Spandex fabric on the rear side prevents odors. Both materials contribute to allowing full range of movement for any activity and fits easily under your outer garments. Heated zones cover thigh, knee and upper butt with 48-Watts of heat. Only the best goes into the Heated Pants Liners: High-tech, wicking, stretch fabric construction with different cuts for men and women, YKK zippers, carbon "soft heat" heating element, connectors and wires rated to -40 degreesF for durability and longevity.Features:-
48-Watts of heat using soft-heat pure science heating method.
Stretch Gelanots in front as a wind stop.
Anti-bacterial treated fabric minimizes odors and manages perspiration with moisture-wicking properties.
Integrated sock plugs stow in their own zippered pockets when not in use.
Dual zone heating for use with either a Single or Dual Heat-trollerT. Remote Heat-troller pocket.
Packs it into its included zippered pouch.
3.5-Amps draw at 13.8V. 4.0-Ohms.
One-year manufacturer's warranty.
MEN'S GEN 4 HEATED PANT'S LINER SIZE CHART
SIZE
WAIST (IN) (CM)
SMALL
28-30 (71-79)
MEDIUM
32-34 (81-89)
LARGE
36-38 (91-99)
X-LARGE
40-42 (101-109)
2X-LARGE
44-46 (111-118)
Five snap concealment ladies vest
Two lower side pockets
Two concealed carry pockets
Single panel back
V-Neck and a large Single Back Panel (ideal for patch work).
Iris - Women's Motorcycle Leather Jacket
The Iris jacket is a classic, motorcycle style jacket with some fun updates like the purple perforated collar. It has lots of features, including vents, tons of pockets, zippered sleeves, and an adjustable belt. Armor pockets for CE rated armor provide extra protection for motorcycle rides, or go without for a fashionable night out!
Features:
1.1-1.2mm Drum Dyed Cowhide
Motorcycle style with snap down lapel, collar, epaulets and asymmetrical zipper
One zippered chest pocket
Two zippered slash pockets
One cellphone pocket
Zippered sleeves
Adjustable belt
Two lower back vents
Two conceal carry pockets with tapered holsters (quick access on left side)
Perforated collar with purple coloring
Mesh lining
Armor pockets in shoulders, elbows and back for CE rated armor
Full Grain Premium 2.2mm Cowhide Waterproof Leather
Anti Slip, Oil Resistant Cement Outsole
Side Zipper Entry W/ Pull Tight Lacing
Smart Mask Climate Control Insole w/Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
Full Grain Premium 2.2mm Cowhide Waterproof Leather
Lace to Toe Design, Welted Construction, Waterproof Exterior
Two Tone Base Layer W/ Milwaukee Signature Hardware
Smart Mask Climate Control Insole w/Flex Power Toe Design
Linings are Moisture Wicking
The perfect crossover jacket with a bold look that you'll want to wear on and off the bike.
Features:
Lightweight twill body with leather sleeves
Club style with banded snap collar
Snapped wrist closure with gussets
Center front zipper
Single zippered chest pocket
Two zippered slash pockets
Two concealed carry pockets with tapered holsters
Black reflective piping along arm, back and shoulder seams
Mesh lining
YKK zippers
Pockets for CE Level 2 shoulder, elbow and back armor (sold separately)
The ICON Raiden™ Level 3 Waterproof pants are the premier accompaniment to the ICON Raiden™ Jacket. Comprised of a Supplex® 3-layer nylon shell with 10k/10k Waterproof breathability as well as durable Cordura® overlays the result is a bombproof riding pant that can go the distance. The ICON Raiden™ pant features full seam sealing and full-leg waterproof YKK® zippers. A full complement of D3O® impact protectors - both hip and knee (3 positions) offer coverage. Cargo storage pockets, belt loops, sizeable technical Hook & Loop lower leg adjustment with a waterproof gutter system, and retro-reflective hits - the Raiden™ Pant has all the necessary features to facilitate your big-time adventure desires
Nappa LeatherNot only has the Cafe Racer glove captured that classic “rocker” style, it’s impressive list of ride-specific features also captures the elusive sweet spot between protection and comfort.Features:
Soft Nappa leather outer construction
Drum dyed leather padded palm
Classic retro styling
Articulated Full Flex™ panel for mobility on cuff and fingers
YKK® zipper entry with gusset
Pre-Curved ride friendly design
High density padding on knuckle and thumb area for protection
Perforation holes around fingers for ventilation
Embroidered logo application
Comfort elastic inside cuff
CAFE RACER GLOVE SIZING CHART
SIZE:
HAND (IN):
Small
3”
Medium
3.5”
Large
4”
X-Large
4.5”
2X-Large
5”
3X-Large
5.5”
CONVERT TO CENTIMETERS
HJC has created a true youth helmet with the CL-Y. The youth-size polycarbonate shell provides a lightweight helmet, with superior fit and comfort using advanced CAD technology. An integrated ventilation system enhances cooling airflow. The large eye port design allows for maximum visibility and hosts a flash-mounted shield ratchet system that is simple and easy to use when changing the shield.
Made for your Harley
These Aquatic AV speakers are made to bring better sound to your Harley-Davidson® touring motorcycle. These water-resistant 6-1/2” speakers fit into your bike with minimal hassle, and they'll pump out maximum sound.
Ready to get loud
Rated at 90 watts RMS, these speakers can absolutely cut through the wind and road noise that makes stock speakers almost irrelevant. And they're not just loud, either. They're made to make any kind of music sound great. The 1” silk tweeters can be rotated and aimed to send those high notes right where you want them.
Easy installation
Aquatic AV builds their audio gear with only the highest-quality materials. These speakers feature fiber cones, neodymium magnets, and UV resistant grilles and baskets, so they'll keep sounding great, ride after ride.
Your speakers come with black grilles, mounting rings and mounting hardware, so DIY installation is no big deal. On 1998-2013 models, you'll need to install the grilles and mounting rings, while on 2014-up models, you won't.
What's in the box:
Aquatic AV AQ-SPK6.5-4HB owner's manual
If you need assistance accessing this owner's manual, please give us a call.
Two 2-way speakers
2 Mounting brackets
2 Grilles
2 Crossovers (wire attached)
2 Harley-Davidson wire harness adapters
Eight 1" Stainless steel speaker mounting screws
Six 1" Stainless steel bracket mounting screws
Installation guide
Product highlights:
6-1/2" speakers for select Harley-Davidson motorcycles (pair)
complex fiber cone and durable rubber surround
1" silk tweeter
UV-resistant grilles and baskets
removable grilles
stainless steel mounting hardware included
power rating: 90 watts RMS (180 watts peak)
frequency response: 60-20,000 Hz
impedance: 4 ohms
mounting depth: 2-3/4"
warranty: 2 years
60-day returns
MFR # AQ-SPK6.5-4HB
Item # 261SP654HB
Equipped with many of SHOEI’s top features while keeping functionality efficient and to the point, the all-new RF-SR is anything but “entry level”. Boasting a compact, aerodynamic shell design along with sharp and aggressive styling, the RF-SR has a progressive look all of its own. Exceptional airflow, an advanced shield system, and a fully removable liner allow the RF-SR to excel whether short-distance street performance or long-distance touring comfort is your jam. The RF-SR–Streamlined functionality and affordability with premium SHOEI quality.
Advanced short-distance street performance and long-distance touring comfort
Compact, aerodynamic shell design with sharp and aggressive styling
Optimal shell aerodynamics and liner components reduce unwanted road noise
Matte black ventilation components enhance aggressive styling
Streamlined function and affordability
VENTILATION PERFORMANCE
Fine-tuned in SHOEI’s state-of-the-art wind tunnel to optimize the important balance between airflow and a quiet ride, the RF-SR is equipped with three (3) adjustable air intakes and two (2) exhaust outlets to help customize your ventilation in every condition.
Large lower vent shutter for ease of use with riding gloves
Two upper air vents for optimal air intake
Two uniquely-positioned upper exhaust vents for improved negative pressure suction
Wind-tunnel optimized to balance enhanced airflow and silence
SHIELD SYSTEM
The RF-SR’s shield system provides a vast field of vision that rivals helmetless peripheral, features innovative ribs to improve rigidity and eliminate bending, and facilitates quicker shield changes than ever before.
CWR-1 SHIELD
Protects from 99% of the sun’s damaging UV rays
3D injection-molding ensures distortion-free view throughout the entire field of vision
Innovative new ribs on top and bottom edge improve rigidity and eliminate bending
Improved shield locking mechanism
Comes equipped with Pinlock® EVO fog-resistant system
QR-E BASE PLATE SYSTEM
Facilitates quick and smooth shield changes
SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal
Strengthened springs for more precise functionality
Five-stage rotating dial for shield/base plate fine-tuning
SAFETY
Few characteristics of a motorcycle helmet are as critical as its first and second layers of defense, which is precisely why the RF-SR features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell and Dual-Layer, Multi-Density EPS liner.
MULTI-PLY MATRIX AIM+ SHELL
Proprietary technology integrates a six-ply matrix
Hand-laid interwoven layers of fiberglass with organic fibers and resin
SHOEI’s strongest, lightest, most elastic shell
DUAL-LAYER MULTI-DENSITY EPS LINER
Provides enhanced impact absorption by utilizing varying densities of foam
Allows cooling air to travel unrestricted through tunnels created in the EPS
Precise placement of multi-density EPS material yields a more compact, lightweight design
EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)
Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck
COMFORT
The RF-SR is equipped with a fully removable, washable, adjustable, and replaceable interior system that’s been enhanced for a comfortable fit and maximum helmet stabilization during high-speed riding.
Fully removable, washable, replaceable and adjustable
Three-dimensionally shaped to match the contours of a rider’s head
Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization
Cheek pad channel for eyeglasses
HELMET SIZE CHART
SIZE
HAT SIZE
CM
INCHES
X-Small
6 5/8 - 6 3/4
53-54
20 7/8 - 21 1/4
Small
6 7/8 - 7
55-56
21 5/8 - 22
Medium
7 1/8 - 7 1/4
57-58
22 1/2 - 22 7/8
Large
7 3/8 - 7 1/2
59-60
23 1/4 - 23 5/8
X-Large
7 5/8 - 7 3/4
61-62
24 - 24 3/8
2X-Large
7 7/8 - 8
63-64
24 3/4 - 25 1/8
3X-Large
8 1/8 - 8 1/4
65-66
25 5/8 - 26
HOW TO MEASURE YOUR HEAD SIZE
To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead).
Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets.
THE PERFECT FIT
No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.
Work the ElementsDanner built the Cedar River to be an on-the-job mainstay you won't want to take off when the workday ends. A distinctive moc toe on the full-grain leather upper gives it timeless style, while a Danner Dry lining provides waterproof protection you can count on. Long days on your feet feel just a little bit shorter thanks to a PU midsole with a wedge design that reduces underfoot pressure points. The outsole is made of durable rubber with Goodyear Welt construction, so it's built to last.Premium Leather UpperThe upper on this boot is constructed from durable and water-resistant premium leather.Danner Dry100% waterproof barrier allows moisture to escape without letting water in, keeping your feet dry and comfortable all day long.Padded CollarProvides additional comfort, particularly during break-in period.Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.Danner® Cedar River OutsoleThis non-marking, oil-and-slip-resistant rubber outsole offers confident traction and all-day comfort on hard surfaces.Goodyear Welt ConstructionComparable durability and longevity to our stitchdown construction, the Goodyear welt construction creates a stable, long-lasting attachment of the outsole to the upper of the boot.How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Lightweight Base Layer PantsPRODUCT DETAILSHigh-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)
Raised on the rain-soaked streets of Portland, the ICON design team knows a few things about wet weather riding. The CE-certified PDX3, named after our home city, combines the necessity of a fully-taped waterproof/breathable shell with premium D3O impact protectors in the elbows, shoulders, and back. In addition, the pit zips provide additional venting ability while the hood rolls up for riding.
FITICON® Relaxed FitMATERIALHycor™ Waterproof/Breathable ChassisInternal 300D Polyester ReinforcementsPROTECTIONJacket Tested and Certified According to EN 17092-4:2020 class AD30® Removable Viper Back; Elbow and Shoulder T5 Impact Protectors - EN 1621-2:2014 / EN 1621-1:2012FEATURESRemovable Insulated Vest Liner, Oversized Pit Vents, Roll & Stow Hood
FIT
RELAXED
Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over another garment.
WATERPROOFING
GOOD
Hycor™ chassis provides optimum weather coverage
CONDITIONS
COLD to MILD
Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.
JACKET SIZING INFORMATION
There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.
Measurement
Chest
Sleeves
Attack
Tailored Body
Precurved arms
Sport
Straight Body
Semi-precurved Arms
Relaxed
Straight Body
Straight Arms
CHEST MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.
SLEEVE MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.
WOMENS JACKET SIZING CHART
Size
Chest Inches
Sleeve Inches
UK Conversion
Europe Conversion
X-Small
33
29
5
40
Small
35
29.5
7
42
Medium
37
30
9
44
Large
39
30.5
11
46
X-Large
41
31
13
48
2X-Large
43
31.5
15
50
3X-Large
45
32
17
52
PORTLAND
STOWABLE HOOD
Hood rolls up for easy storage
WATERPROOFING/BREATHABLE
Hycor™ chassis provides optimum weather coverage
D3O® IMPACT PROTECTOR PACKAGE
SHOULDERS, ELBOWS, & BACK
Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.
CARE INSTRUCTIONS
General CareICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.
Pre-CleaningIt is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.
CleaningInsulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!
DryingInsulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.
Cardo Freecom 2X Headset
The Cardo Freecom 2X Headset builds off the very successful Freecom 2+. Adding 40mm JBL speakers, Over-the-Air software updates and the latest Bluetooth 5.2 connection Cardo has pushed the offerings of the Freecom line forward. The staples from the Freecom 2X’s predecessor are still found, such as two channels for smartphone and GPS connection, waterproofing, FM radio and universal connectivity to other bluetooth intercom devices. The Freecom 2X will keep you connected to your passenger or another rider and enhance the experience of any ride.
Features:
Intercom communication between passenger and rider or rider to rider (Range: 0.5 miles/ 800m)
2 Bluetooth channels to connect with phone/GPS devices
Phone features include make/receive/reject calls, speed dial, conference call with intercom
Live Bluetooth Intercom feat. auto-reconnect
Automatic Volume Control can automatically adjust your sound based on the outside ambient noise
Easy-to-use control wheel
Multilingual status announcements
Cardo Connect app compatible with iOS and Android
Over-the-Air software updates
Waterproof
USB type-C connection
Up to 13 hours of talk time
Fast charging provides 2 hours of talk time after 20 min charge
10 day standby time
Built-in FM radio with RDS
Bluetooth 5.2
40mm JBL speakers
Universal connectivity
Cowhide 1. 2 to 1. 3 mm (Real Soft leather & feels great)
Removable Full Sleeve Zip-Out Liner with Neck Gaiter- Leave it in and stay warm in cold weather, or zip-it off and stay cool in warm weather
Zipper Controlled Venting System (Front, Back & Arms)
Great in warm weather, no need to take off your jacket, air flows around your body
Black Reflective piping across chest & Back for being better visibility at night
Action Back for Freedom of Movement of your arms and shoulders
Mandarin Style Collar
Heavy Duty antique YKK Zippers
Zipper Closure Hand warmer Pockets
Two concealed carry pockets with tapered holsters (quick access on left hand side)
Stretch Panel Sides & Velcro Adjustment Straps for waist adjustment
Kevlar stitching
Armored pockets for CE rated armor (Back, Elbows, & Shoulders)
2 Year Eagle Leather Warranty
Fit: The model with the beard is 6'1", 280lbs, wearing a size 3XL.
Features:-
Reflective panels at both front and back of jacket
Removable waterproof liner
Adjustable pockets allow fine tuning of armor placement
Adjustable collar
Two-position magnetic collar closure
Intake and exhaust zip vents to regulate body temperature
Action back design for increased movement
Ergonomic jacket to pant zipper interface
Two-way CNTB YKK zipper gauntlet closure with garage
Interior drawstring waist pull
Adjustable hook-and-loop attachments on waist, forearm and biceps for secure fit
Two interior chest pockets and four exterior pockets (2 chest, 2 hand)
Pass through grommet in left hand pocket for heated gear controller
SAS- TEC CE Level 2 protection panels on the shoulders, elbow and back
Internal construction and loops to accommodate the use of Firstgear® heated gear
Constructed from 100% waterproof materials
WOMEN'S KILIMANJARO 2.0 JACKET SIZING CHART
CONVERT TO CENTIMETERS
SIZE
DRESS - SIZE (IN)
BUST (IN)
WAIST (IN)
HIPS (IN)
SMALL
4 - 6
32 - 34
25 - 27
34.5 - 36.5
MEDIUM
8 - 10
34 - 36.5
27 - 29.5
37 - 39
LARGE
12 - 14
37 - 39.5
30 - 32.5
39.5 - 42
X-LARGE
16 - 18
40.5 - 43.5
33 - 35.5
42.5 - 45
2X-LARGE
20 - 22
44 - 46.5
36 - 38.5
45.5 - 48
3X-LARGE
24 - 26
47 - 49.5
39 - 41.5
48.5 - 51
The Kiliminjaro™ 2.0 jacket is a high-end, waterproof, breathable performance shell jacket that creates the optimum micro-climate for your journey. Blending lightweight flexibility and abrasion-resistance to keep you protected, without weighing you down.
PRODUCT DETAILS
Reflective panels at both front and back of jacket
Removable waterproof liner
Adjustable pockets allow fine tuning of armor placement
Adjustable collar
Two-position magnetic collar closure
Intake and exhaust zip vents to regulate body temperature
Action back design for increased movement
Ergonomic jacket to pant zipper interface
Two-way CNTB YKK zipper gauntlet closure with garage
Interior drawstring waist pull
Adjustable hook-and-loop attachments on waist, forearm and biceps for secure fit
Two interior chest pockets and four exterior pockets (2 chest, 2 hand)
Pass through grommet in left hand pocket for heated gear controller
SAS- TEC CE Level 2 protection panels on the shoulders, elbow and back
Internal construction and loops to accommodate the use of Firstgear® heated gear
Constructed from 100% waterproof materials
MEN'S KILIMANJARO 2.0 JACKET SIZING CHART
SIZE
CHEST
WAIST
SLEEVE
TALL SLEEVE
SMALL
34 - 36
28 - 30
32½ - 33
-
MEDIUM
38 - 40
32 - 34
33½ - 34
-
LARGE
42 - 44
36 - 38
34½ - 35
36 - 37½
X-LARGE
46 - 48
40 - 42
35½ - 36
37 - 37½
2X-LARGE
50 - 52
44 - 46
36.6 - 37
38 - 38½
3X-LARGE
54 - 56
48 - 50
37 - 37½
38½ - 39
Description
Mobile Cooling Technology
Designed for optimal sun protection paired with drirelease® technology, Fieldsheer®’s Mobile Cooling® hooded long sleeve shirt is ideal for any outdoor activities in higher temperatures. Whether you’re working outside or enjoying a casual summer hike, this shirt ensures you’ll remain cool, comfortable, and protected from harmful UV rays. Manufactured with 92% recycled polyester and UPF 50+, the hooded long sleeve mobile cooling® shirt offers reduced skin temperatures of up to 7° and dries 4x faster than traditional knits. Ideally suited for any outdoor pursuits from work to recreation.
Drirelease® Moisture Wicking Cooling:
Moisture Wicking: Pulls sweat away
Fast Drying: Dries up to 4x faster
Superior Comfort: Regulates skin temperature up to 7 degrees cooler
Premium Quality: Easy care; holds shape
Eco Friendly: 92% recycled material with no chemical coating
Fieldsheer's Mobile Cooling® Long Sleeve cooling shirt for men delivers unparalleled moisture-wicking, evaporation, and cooling technology designed to provide cooling comfort for any activity. Keep your core cool, whether you’re working in hot environments or going for a light hike in the summer. Environmentally conscious Rerelease® fabric is produced with 92% recycled polyester that wicks moisture away from the body and dries 4x faster than traditional polyester fabrics. Sun sheer™ Ultraviolet Protection Factor (UPF) of 50+ blocks 98% of harmful UV rays providing another layer of protection and comfort. Soft and lightweight, the Mobile Cooling® Long Sleeve Shirt can reduce the skin’s temperature by 7° and make it ideal for active days in high temperatures for any activity.
Pair this cooling shirt with our Mobile Cooling® Skull Cap and Cooling Neck Gaiter for the ultimate cooling combination!
Shirt Features:
Geo Cool Knit Drirelease® tech provides superior stretch, cooling, and comfortably and can reduce skin temperature by up to 7°
Powerful Sunsheer™ UPF 50+ sun protection offers defense against harmful UV rays
Odorsheer™ anti-odor tech prevents the growth odor causing bacteria
Sweatsheer™ moisture-wicking system aids evaporation and keeps you cool and dry all day
Flat-lock seams prevent rubbing or chafing
Pullover hood offers complete protection
Pullover neck gaiter for men to protect the face from harmful UV rays
Thumb opening for women to keep hands dry, cool, and protected
Ventilated mesh panels on sides, back, and underarms
92% Recycled Polyester 8% Spandex Outer
91% Recycled Polyester 9% Spandex Contrasts
Men's sizes: SM-3XL
Women's sizes: XS-XL
Size Chart: This garment runs true to size. We recommend you consult our size charts before purchasing.
RELIABLY RUGGED
Built in the USA with a dedication to quality that goes back to 1932, the Bull Run is a utilitarian work boot with a timeless design that stays in style when you punch out. The full-grain leather upper is the perfect blend of strong and soft. Combine that with the sturdy Danner Wedge outsole and you get all-day comfort that lasts.
Full-Grain, Oiled Leather UpperAfter incorporating oil into the tanning process, we take the oiled, full-grain leather and put it through a series of rigorous testing to ensure its strength and durability. This form of leather is more resistant to water and other liquid damage and requires less maintenance over time.
Unlined Leather UpperLighter weight with cool comfort in warmer temperatures, our unlined leather boots will mold perfectly to your foot.
Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.
Oil and Slip ResistantOur oil-and-slip resistant outsoles have been certified to meet OSHA safety standards.
Removable OrthoLite FootbedThree layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood. Not recommended for daily use on asphalt.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Description
Flag Bling Full Cut Short Sleeve Ladies Black T-Shirt. This ladies full length T-Shirt in the color black Features: a rhinestone bling American flag and screen printed text reading 'RIDE FOREVER' and 'FOREVER FREE'
Features:
Made of 100% Cotton
Full Cut
Bling Transfer and Screen-print Combo
Exclusive Artwork
Machine Wash Cold with Like Colors, Dry Low Heat, Iron Inside out if needed
Proudly Printed in the USA
SHORT SLEEVE MEASUREMENTS IN INCHES
LADIES RIDE FOREVER FREE SHIRT SIZING CHART
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOU-LDER TO HIP
25
25
26
27
28
EAGLE REFLECTIVE JACKET V2
PRODUCT OVERVIEW:
Marrying style with functionality, the Eagle Reflective Jacket V2 is a testament to Eagle Leather's commitment to quality. Crafted from premium cowhide, this jacket isn't just about aesthetics; it's a biker's best companion. Whether you're riding through a cold night or a sunny afternoon, its features cater to diverse conditions. The reflective piping ensures you're visible during night rides, while the versatile venting system keeps you comfortable throughout your journey.
FEATURES:
Cowhide 1.2 to 1.3 mm
Removable Full Sleeve Zip-Out Liner
Zipper Controlled Venting System
Reflective Piping across Chest & Back
Action Back
Snap Closure Mandarin Collar
Heavy Duty Antic YKK Zippers
Zipper Closure Hand Warmer Pockets
2 Inside Pockets
Stretch Panel Sides & Velcro Adjustment Straps
FEATURES AND BENEFITS:
Cowhide 1.2 to 1.3 mm: Offers durability with a soft, luxurious feel.
Removable Full Sleeve Zip-Out Liner: Versatility for all weather conditions.
Zipper Controlled Venting System: Ensures optimal air circulation during warm rides.
Reflective Piping: Enhances nighttime visibility for safer rides.
Action Back: Allows unrestricted arm and shoulder movement.
Snap Closure Mandarin Collar: A blend of style and protection.
Heavy Duty Antic YKK Zippers: Ensures longevity and ease of use.
Pockets: Convenient storage options, both external and internal.
Stretch Panel Sides & Velcro Adjustment Straps: Customized fitting for comfort and safety.
Features:
3-in-1 all season jacket allows user to customize layers based on riding condition
600D polyester at critical wear areas
Hydraguard - Weatherproof technology
Windproof, waterproof, breathable
120G of insulation
High abrasion fabric in critical wear areas
CE Level 1 removable shoulder/elbow armor - conforms to EN 1621-1 standard
Removable PE back pad - Upgradable to FLY Barricade CE armor
High-visibility reflective panels and logos for added safety
Intake and exhaust vents
Hook and Loop waist adjusters for customized fit
YKK® main zipper
Micro fleece collar
Zipper pulls for ease of use with gloves
Zippered hand warmer pockets
Arm volume adjusters secure armor and provide optimum fit
Drop tail for added coverage
Anatomically fitted for ideal riding position
FLY STRATA JACKETS SIZING CHART
SIZES
SLEEVE
CHEST
SMALL
31"-32"
34"-35"
MEDIUM
32"-33"
36"-38"
LARGE
33"-34"
40"-42"
X-LARGE
34"-35"
44"-46"
2X-LARGE
37"
48"-50"
3X-LARGE
37"
52"-54"
3X-LARGE
37"
56"-58"
DAYRIDE JACKETHitena™ Reinforced Rock Tex™Features:• Combined Hitena™, Rock Tex™ 600, and Free Air™ mesh hybrid outer shell for maximum impact resistance and mesh cooling where you need it• Full Flex™ system: precision tailored fusion of pliable mesh (underarm/shoulder/back) and articulated back expansion panels, drastically augmenting mobility• Externally accessible CE approved armorin shoulders and elbows• Removable spine armor• YKK® zippers throughout• Sure Fit™ 6-point custom adjustment system• Snap loops for attaching jacket to belt• 8” rear zipper for pant attachment• Removable insulated vest liner• Reflective sleeve panels & back stripe
Features:Genuine leather construction provides durabilityWaterproof, windproof and breathable Hipora liner100g of Thinsulate insulationTouch Screen compatibleArmored knuckles for added protectionPre-curved fingers enhance comfort and reduce rider fatigueAdjustable gauntletLithium ion battery, charger and controller with 3 heat settingsBattery life: 4 hours on low heat, 3 hours medium heat, 2.5 hours high heat
The reinvented RPHA 90 Carbon is the most compact modular helmet, resembling a full-face helmet through weight and appearance, yet functioning as a modular helmet. The Premium Carbon Fiber Outer shell provides enhanced shock-resistant performance and a comfortable and very lightweight helmet using reinforcement materials that include carbon and carbon-glass hybrid fabric. The RPHA 90 Carbon has a 3D-engineered low-noise interior that is focused to reduce noise significantly for riders. Another convenient feature is the EPS design that accommodates riders who use eyewear and also has recessed areas for custom speaker placement.
* Soft Milled Cowhide 1.1-1.2mm* Hip hugging curvy fit‚ gives sexy look* Extremely low rise with petite double belts in the front and added rivet decorations* Fully lined with mesh liner* The self adjusting back belt that will adjust automatically to size when the front is buckled* Ever so important but extremely rare thigh lace adjusters help customize thigh fitting. The placement of the lace keeps it out of the way while walking or sitting* Zipper buffer prevents liner from catching in the zippers* Snap boot cuffs for easy on and off and cutting to adjust length* Unfinished bottom for trimming to correct size* Heavy snaps and Original YKK zippers. Non-rusting‚ non-corroding
LOWRICE CHAPS SIZING CHART
POINT-OF MEAS-URE-MENT
X-SMALL
SMALL
MED-IUM
LARGE
X-LA-RGE
2X-LA-RGE
3X-LA-RGE
4X-LA-RGE
5X-LA-RGE
INSEAM
31 1/2
31 1/2
31 1/2
32
32
32
32 1/2
32 1/2
32 1/2
WAIST
28
30
32
34
36
38
40
42
44
THI-GH:1R-ICE
17 3/4
18 3/4
19 3/4
20 3/4
21 3/4
22 3/4
23 3/4
24 3/4
25 3/4
BOTT-OM OPE-NING
19 1/4
19 1/2
19 3/4
20
20 1/4
20 1/2
20 3/4
21
21 1/4
Description
The trendy smart case will hold your cell phone, keys, credit cards, and currency. Take this case for a quick trip to the store or a night out dancing either way you will be right in style with this chic cell phone wallet. The matching removable wrist strap features a key ring that can detach with the strap. Be hands-free by just slipping the wrist handle around your wrist.
Features:
Measures 5.25 x 3.25 x 1 inches
Fits most phones, interior sides measure 4.75 x 2.8 x 0.45 inches
Push button closure
Removable wrist strap and key ring
NOTE: Please note the price listed is for 1 individual item not the entire assortment.
Portable heat in the palm of your hand! Air-activated Grabber Hand Warmers keep hands and fingers toasty for over 10 hours. No shaking or kneading required; just open the package and put the "Original" Warmers in your glove or pocket for a few minutes to start the process. Hand Warmers are standard equipment for skiers, snowboarders, hunters, campers, hikers, birdwatchers or anyone who enjoys outdoor activities when the weather is cold. Hand Warmers are widely used as portable, long-lasting heat therapy. If you suffer from cold, sore hands and fingers as a result of Arthritis, Raynaud's, Lupus, Scleroderma, Sjögren's, Myalgia or just poor circulation, Grabber Warmers provide soothing warmth.
