Description
Lightweight V Bomber Glover Lambskin Leather Pointed Collar
Stuffing:100% Goose Down
Two hand pockets
Removable snap collar
Zippered front and snap closure
2 year warranty on hardware
PRE-ORDER AVAILABLE - ETA EARLY DECEMBER
Sena 60S HD Bluetooth Headset - Single Pack
The Sena 60S is a cutting-edge motorcycle helmet communication system designed for riders who crave seamless connectivity and high-performance features. Equipped with Mesh 3.0 Intercom technology, the 60S allows users to effortlessly connect with a virtually unlimited number of riders, providing a clear and stable communication experience even in large groups. With its 2nd generation of Harman Kardon speakers, the 60S ensures crisp audio quality for music, GPS navigation, and phone calls. Whether you're exploring the open road solo or riding with friends, the Sena 60S elevates your journey with unparalleled connectivity and convenience.
Features:
Geo-Based Group Intercom - Connect with all Wave users in a 1 mile radius
Rider-Based Group Intercom - Establish Group Intercom with selected Wave participants
Real-Time Location Display- See location of participants on the Wave App
Intelligent Intercom - Automatically switch from Wave Intercom to Mesh IntercomTM when cellular service is unavailable
Cross Brand Compatible- Any Bluetooth headset (even non-motorcycle specific) can use Wave, with limited functionality
Communication:
Wave Intercom
Mesh 3.0
Bluetooth intercom IPX7 waterproof rated
Integrated flashlight
Modular faceplate and jog dial with multiple cover options included
2 magnetic mounting clamps
Sound by Harman Kardon:
2nd Generation Harman Kardon 40mm Speakers
Higher sound output
Increased audio resolution
Wider dynamic range
Wave Intercom:
Based on VoIP service
Virtually unlimited intercom distance
Simple intercom group creation
Real-time location sharing
Cross-brand compatibility
Bluetooth Intercom:
Four-way intercom
HD two-way intercom
Working distance 2.0 km (1.2 mi)
Talk time: 22 hours (with the dynamic motion LED off)
Mesh 3.0:
New Mesh algorithm for improved intercom quality and strength
Improved noise cancellation for clearer communication
Working distance 2.0 km (1.2 mi) in open terrain - up to 8.0 km (5.0 mi) with 6 participants
Intercom Mode - Open mesh with 9 channels, group mesh
Talk time: 16 hours (with the dynamic motion LED off)
SHELL Meets or exceeds DOT FMVSS 218 and ECE 22.06.1300 g +/- 50g.Sizes XS-3XL.Made from 6K carbon fiber. 6 shells.Intermediate Oval.COMFORT
Removable washable, MagnaTech liner wicks moisture to keep you cool. 3D laser-cut cheek pads for all day comfort with no hot spots.
VISOR
“A Class” Polycarbonate face shield is optically correct, scratch and UV resistant. Pinlock Max ready shield, includes Pinlock insert. Built in sun shield.
SECURITY
DOT approved Micrometric quick release chin strap for a secure closure. Emergency Release Cheek Pad System. State of the art multi-density EPS.
VENTILATION
Fully adjustable, multi-port dynamic, flow-through ventilation with channeled EPS to keep you cool.
5 YEAR WARRANTY
Experience a smoother ride with Throttle Assist Cramp Busta Large Black! Simply apply pressure with your palm to ease onto the throttle in ultimate comfort. No more uncomfortable cramping, just effortless cruising.
Unleash your inner bad ass with our Belt Buckle - Bad Bone! Featuring a fierce eagle and gnarly skull design, this buckle is the ultimate accessory for those who exude confidence and edginess. Elevate any outfit and show off your true bad ass nature with this statement piece.
Take on the open road with our Trucker Belt Buckle! Designed with a call for adventure and lasting durability, this buckle is perfect for those who live for the long haul. Navigating the roads has never been more stylish!
Upgrade your style with our Live to Ride belt buckle! Made for the die-hard motorcycle enthusiast, this buckle features a bold design that screams attitude.
Embrace your love for riding with this must-have accessory.
This belt buckle is not just stylish, it's built to last with gorgeous detailing. Featuring an intricate eagle and feather design, it adds a touch of elegance to any outfit. Make a statement with this Oval Eagle Scene belt buckle!
With crisp and stylish vintage detailing, this accessory is the perfect addition to any outfit. Make a statement and showcase your love for the classic Coca-Cola brand.
Personalize your style with our Iron Cross belt buckle! Made with sturdy materials, this belt buckle is not only fashionable but also durable. Show off your unique style with this must-have accessory.
Celebrate American culture with the iconic design of this belt buckle! With a classic beauty that will make a statement, this buckle is the perfect addition to any outfit. Showcase your love for motorcycles and the USA with this unique piece.
The perfect accessory for those with a rebellious spirit, the Hard Tail belt buckle adds a touch of personality to any outfit. Embrace your sense of adventure and upgrade your wardrobe today!
Upgrade your style with our bold Belt Buckle - Skulls! This blinged-out accessory will make you stand out and elevate any belt. Dare to be different and add some edge to your wardrobe!
Featuring a bold eagle cutout design, this buckle is a symbol of freedom and liberation. Elevate your style and soar to new heights with this must-have accessory. Unleash your fierce fashion sense and make a statement with every outfit.
This belt buckle embodies the edge and freedom of biker culture. With its iconic design, it's not just an accessory but a statement of lifestyle. Instantly recognizable, it will add a touch of rebellion to any outfit.
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Patch
feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
• Identify where you want the patch and outline the area with tailor’s chalk
• Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
• Position your inside hand so it is resting flat between the lining and outlines area
• Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
• Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
• This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
• Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
• Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
• Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
• Preheat your iron to 325-335 degrees. Do Not Use Steam.
• Press the area where you want your patch to be for 25 seconds
• Position the patch on the garment so that it is positioned where you would like it to be
• Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
• Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
• Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
• Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
• Let the garment cool completely before wearing
Shoei X-15 Helmet
Shoei pushes the boundaries of innovation with disruptive technology to bring you the X-15 helmet, for when the milliseconds count! Utilizing their state-of-the-art wind tunnel facility, Shoei designed the X-15 with 6.1% drag reduction and 1.6% lift reduction compared to its predecessor, the X-14. Inside its Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, the X15 is jam-packed with a whole host of features that provide peak performance, comfort and safety. The search for peak performance need go no further than the X-15 from Shoei.
Aerodynamic Shell Design
Designed and refined in Shoei’s state-of-the-art wind tunnel facility
6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14
Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces
Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance
Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell
Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity
Four shell sizes
Multi-Piece Multi-Density EPS Liner
Optimized impact absorption thanks to varying densities of foam in key areas
Precise placement of multi-density EPS liner material yields a more compact, lightweight design
Strategically-located tunnels allow cooling air to travel unrestricted through the helmet
Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)
Ventilation System
Seven (7) closable air intakes and six (6) exhaust outlets
Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet
Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation
Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area
Field of Vision
Revised eyeport trajectory from previous model increases the upper field of view by 5mm
DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport
CWR-F2R Shield & Base Plate System
Distortion-free face shield thanks to Shoei’s innovative 3D injection-molding process
Protects against 99% of the sun’s damaging UV rays
CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility
Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise
Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates
Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock
Trigger lock mechanism prevents the shield from detaching during an impact or crash
3D Max-Dry Custom Interior System II
3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable
Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors
Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit
Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit
Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions
Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit
Emergency Quick Release System (E.Q.R.S.)
Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet
Safety Certifications
Snell M2020R certified
ECE-22.06 certified
DOT certified
