Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
Dimensions: 15. 5" x 9. 75" x 29"
Made of fine quality PVC and tough durable textile
UV protected and water resistant to withstand the elements and life on the road
Covered metal interior "skeleton" to ensure bag does not lose it's shape
Top and bottom bag also feature a plastic sheet within the bag itself to maintain its shape
2 large side doors that can be open from either side allowing easy access to cargo area
2 Inside mesh pockets and outside mesh pockets for better organization of your items
Extremely spacious interior with an adjustable shelf to separate your belongings
Features a fully adjustable mounting rig to easily attach or detach very quickly and easily
Comes with addition metal "D" rings to be able to strap or attach additional cargo
Top roll bag is detachable and can be used by itself to pack extra clothes, helmets, rain gear, etc
Both top and bottom bags feature a carrying handle
Comes with rain cover
No Studs
Equipped with many of SHOEI’s top features while keeping functionality efficient and to the point, the all-new RF-SR is anything but “entry level”. Boasting a compact, aerodynamic shell design along with sharp and aggressive styling, the RF-SR has a progressive look all of its own. Exceptional airflow, an advanced shield system, and a fully removable liner allow the RF-SR to excel whether short-distance street performance or long-distance touring comfort is your jam. The RF-SR–Streamlined functionality and affordability with premium SHOEI quality.
Advanced short-distance street performance and long-distance touring comfort
Compact, aerodynamic shell design with sharp and aggressive styling
Optimal shell aerodynamics and liner components reduce unwanted road noise
Matte black ventilation components enhance aggressive styling
Streamlined function and affordability
VENTILATION PERFORMANCE
Fine-tuned in SHOEI’s state-of-the-art wind tunnel to optimize the important balance between airflow and a quiet ride, the RF-SR is equipped with three (3) adjustable air intakes and two (2) exhaust outlets to help customize your ventilation in every condition.
Large lower vent shutter for ease of use with riding gloves
Two upper air vents for optimal air intake
Two uniquely-positioned upper exhaust vents for improved negative pressure suction
Wind-tunnel optimized to balance enhanced airflow and silence
SHIELD SYSTEM
The RF-SR’s shield system provides a vast field of vision that rivals helmetless peripheral, features innovative ribs to improve rigidity and eliminate bending, and facilitates quicker shield changes than ever before.
CWR-1 SHIELD
Protects from 99% of the sun’s damaging UV rays
3D injection-molding ensures distortion-free view throughout the entire field of vision
Innovative new ribs on top and bottom edge improve rigidity and eliminate bending
Improved shield locking mechanism
Comes equipped with Pinlock® EVO fog-resistant system
QR-E BASE PLATE SYSTEM
Facilitates quick and smooth shield changes
SHOEI’s patented spring-loaded technology ensures a wind and waterproof seal
Strengthened springs for more precise functionality
Five-stage rotating dial for shield/base plate fine-tuning
SAFETY
Few characteristics of a motorcycle helmet are as critical as its first and second layers of defense, which is precisely why the RF-SR features the SHOEI-exclusive Multi-Ply Matrix AIM+ shell and Dual-Layer, Multi-Density EPS liner.
MULTI-PLY MATRIX AIM+ SHELL
Proprietary technology integrates a six-ply matrix
Hand-laid interwoven layers of fiberglass with organic fibers and resin
SHOEI’s strongest, lightest, most elastic shell
DUAL-LAYER MULTI-DENSITY EPS LINER
Provides enhanced impact absorption by utilizing varying densities of foam
Allows cooling air to travel unrestricted through tunnels created in the EPS
Precise placement of multi-density EPS material yields a more compact, lightweight design
EMERGENCY QUICK RELEASE SYSTEM (E.Q.R.S.)
Allows emergency medical personnel to easily and safely remove the cheek pads from an injured rider’s helmet
Helmet can be gently removed from an injured rider’s head with minimal load placed on his/her neck
COMFORT
The RF-SR is equipped with a fully removable, washable, adjustable, and replaceable interior system that’s been enhanced for a comfortable fit and maximum helmet stabilization during high-speed riding.
Fully removable, washable, replaceable and adjustable
Three-dimensionally shaped to match the contours of a rider’s head
Multi-layer cheek pads available in multiple sizes for improved comfort and helmet stabilization
Cheek pad channel for eyeglasses
HELMET SIZE CHART
SIZE
HAT SIZE
CM
INCHES
X-Small
6 5/8 - 6 3/4
53-54
20 7/8 - 21 1/4
Small
6 7/8 - 7
55-56
21 5/8 - 22
Medium
7 1/8 - 7 1/4
57-58
22 1/2 - 22 7/8
Large
7 3/8 - 7 1/2
59-60
23 1/4 - 23 5/8
X-Large
7 5/8 - 7 3/4
61-62
24 - 24 3/8
2X-Large
7 7/8 - 8
63-64
24 3/4 - 25 1/8
3X-Large
8 1/8 - 8 1/4
65-66
25 5/8 - 26
HOW TO MEASURE YOUR HEAD SIZE
To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead).
Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets.
THE PERFECT FIT
No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.
Features:
Full Grain Premium 2. 2mm Cowhide Waterproof Leather
Oil & Acid Resistant Outsole w/Non-Skid & Non-Marking Tread
Side Zipper With Square Toe Design
Welted Construction With Milwaukee Signature Hardware
Smart Mask Climate Control Insole w/ Flex Power Toe Design
Linings are Moisture Wicking, Anti-Fungal, Anti-Bacterial
AIRHAWK Dual Sport design specifically to meet the needs of the Dual Sport Rider and their bikes. Has a narrow front to match the seat profile of most Dual Sport Bikes. The front of the DS pad is also tapered down to minimize unwanted pressure on front leg pass. Made in Polyurethane.DESIGNED FOR MORE NARROWED FRONT SEATSAIR PAD MADE OF DURABLE POLYURETHANECOVER: BREATHABLE SPACER MESH WITH NON SKID BOTTOMCRUISER STRAPS INCLUDEDMEASURES 11" L X 11" W
Features:
Shatterproof Lenses: to protect your eyes
UV400 Filter: for maximum UV protection
Scratch Resistant Coating: to resist scratching
Soft Airy Foam: to keep the wind out and for comfort
Foldable Frame: to save space when not worn
Gloss or Matte Black Foldable Frames
Side Venting to Help Prevent Fogging
Includes Microfiber Pouch for Cleaning and Safe Storage
Yellow Tint Mirror Lens
Features:
Ladies 3/4 Jacket w/ Reflective Tribal Detail
Butter Soft premium Cowhide 1. 2-1. 3mm w/ Full Sleeve Zip-Out Thermal Liner
Longer 3/4 Length w/ Side Stretch Panels and Lower Back Extension Zipper for the Perfect Fit
Chest, Shoulder & Back Vents for Warm Weather Riding
Full Chest, Arm & Shoulder Blacked Out Highly Reflective Piping
Embroidered Reflective Chest Tribal Design w/ Colored Contrast Stitching
Built in Dual Side Concealed Weapon & Ammo Pocket
Features:
1.0-1.1 mm Cow Jumble Leather
Full Sleeve Zip Out liner
Fringe Detailing on Arms
Rivet Detailing Throughout
Dual Inside Concealed Weapon Gun Pockets
Double Set Side Buckles For a Custom Fit
One Chest & Two Lower Zippered Angled Pockets
Interior Electronic Media Pocket with Wire Feed
Description
Mobile Cooling Technology
Designed for all-day protection from sun and heat, the Fieldsheer® Mobile Cooling® long-sleeve shirt is perfectly suited for all outdoor activities,
Size Chart
CUSHIONS THE FOOT, SUPPORTS THE ARCH, AND IS QUICK TO DRY.This anatomically designed footbed uses molded TPU to lift the arch. Spongy polyurethane softens the ride. And the Danner name means they'll last.
The ZANheadgear® SportFlex™ Series Windproof Tube is a versatile all-in-one headgear item constructed of polyester elastane and brushed treatment. We've added our great Windproof paneling with interior bonded fleece, to cover your face and ears from the elements. This product is heavier than our standard Motley Tube, yet lighter than our Fleece Lined option, with a softness & comfort that surpasses any competitor. Perfect to wear as a balaclava, face mask, neck warmer, scarf, beanie, and ear warmer to keep warm & protected in versatile climates. Lightweight and machine washable, one size fits most adults. 50+ UV Protection. . Materials: 87% Polyester, 13% Elastane and 100% Polyester.
Features:
600D Nylon Textile Material
Full Sleeve Zip Out liner
Front and back venting
Stand Up Collar with Snap Closure & Two Lower Hand Pockets
Gray Striping Outlining Chest, Arms & Back
Day/Night Reflective Piping
SCHAMPA FaceFit FaceMasks fit your Face it’s that simple. No more Facemask moving or sliding around. The FaceFit line is the first of its kind that molds to your face. Easy Breathe Mesh Mouth and Nose Piece. Lined with Coolskin fabric, these lightweight facemasks can be used year round. Great for blocking Dust, Sand, Sun, Wind, and Cold. Our Patent Pending design is second to none.
Product Features
Facefit System - Moulds to your Face
Ergonomic Fit
Known as Face Shield
Wicks & Breathes
Coolskin Liner (Moisture Management Fabric)
Mesh Front for Easy Breathing
Protection from Sand, Dust, Wind, Sun, and Cold
Relaxed Fit
Year Round Use
One Size Fits Most
Best Seller
Features:
Fits small/large faces
AirShield® Wind Blocking Foam Eyecup (not removable)
100% UVA/UVB protection + distortion-free clarity
Shatter Resistant Lenses
AIRSHIELD® EYECUP TECHNOLOGY
Maximum Protection: A complete seal around your eyes creates total protection from the elements including wind, dust, and other airborne irritants.
EYECUP FILTERED VENTS = NO FOGGING
Patented filtering vents manage air circulation, reduce fogging, and keep your vision free from any distortion that may be caused by lens fogging.
DURABLE & WEATHER RESISTANT FOAM
The closed-cell foam material is unaffected by weather, resistant to perspiration and grime, allowing for a longer lasting more comfortable eyecup.
LENS
100% UVA/UVB Protection
In the Box
Zippered Hard Case with 7eye Emblem
Microfiber Soft Case/Cloth
Sunglasses Retainer
7eye Decal
NOTE: To find the right size and fit, it is important to consider the curvature of your eyebrow bone & cheek bone. The various facial anatomies are the main factors to be considered on how the eyecup will work to offer a complete seal around the orbit of your eyes. Traditional sizing or fitting of a fashion frame does not necessarily pertain.
Features:
Studded Vest With Concealed Carry Pocket
Ladies PREMIUM studded vest
2 exterior pockets
2 interior concealed carry pockets
Side laces for fit
Silver hardware
The ZAN Headgear Neoprene Face Mask features full coverage of the face and ears with stretchy, warm and water resistant 2mm thick neoprene. Like most ZAN Headgear face masks it has a black stretch nylon trim for added durability and clean finish. A hook and loop closure allows for adjustability and ensures great fit, and can even be lengthened with our Neoprene Extension Piece (sold separately). Provides coverage of the ears, nose and cheeks from the elements. Can be used with or without a helmet. One size fits most. Glow in the Dark Spider Web design, reversible to Black. Material: 70% Neoprene, 30% Polyester. U.S. Patented design.
Features
• 100% heavyweight cotton shirt• Screen printed on Front side only• Proudly printed in the USA
MOVE A BODY TANK TOP SIZING CHART
SIZES
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
BUST FULLEST PART OF- CHEST AROUND
38-40
42-44
46-48
50-52
54-56
LENGTH SHOULDER- TO WAIST
27
28
29
30
31
TANK TOP MEASUREMENTS IN INCHES
Work the ElementsDanner built the Cedar River to be an on-the-job mainstay you won't want to take off when the workday ends. A distinctive moc toe on the full-grain leather upper gives it timeless style, while a Danner Dry lining provides waterproof protection you can count on. Long days on your feet feel just a little bit shorter thanks to a PU midsole with a wedge design that reduces underfoot pressure points. The outsole is made of durable rubber with Goodyear Welt construction, so it's built to last.Premium Leather UpperThe upper on this boot is constructed from durable and water-resistant premium leather.Danner Dry100% waterproof barrier allows moisture to escape without letting water in, keeping your feet dry and comfortable all day long.Padded CollarProvides additional comfort, particularly during break-in period.Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.Danner® Cedar River OutsoleThis non-marking, oil-and-slip-resistant rubber outsole offers confident traction and all-day comfort on hard surfaces.Goodyear Welt ConstructionComparable durability and longevity to our stitchdown construction, the Goodyear welt construction creates a stable, long-lasting attachment of the outsole to the upper of the boot.How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Lightweight Base Layer Top
PRODUCT DETAILS:-High-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)
Lightweight Base Layer PantsPRODUCT DETAILSHigh-IQ™ Advanced Evaporation Technology – fast wicking hollow-core fibers transport moisture to the outer surface to dry quicklyFlat-lock stitch seam constructionMulti-direction stretch fabric allows for un-restricted range of motionOpen fabric structure offers lightweight warmth and all day comfortUPF 40+ sun protectionPolygiene® odor Control TechnologyErgonomic panels are form fitting (non-compression)
The Kiliminjaro™ 2.0 jacket is a high-end, waterproof, breathable performance shell jacket that creates the optimum micro-climate for your journey. Blending lightweight flexibility and abrasion-resistance to keep you protected, without weighing you down.
PRODUCT DETAILS
Reflective panels at both front and back of jacket
Removable waterproof liner
Adjustable pockets allow fine tuning of armor placement
Adjustable collar
Two-position magnetic collar closure
Intake and exhaust zip vents to regulate body temperature
Action back design for increased movement
Ergonomic jacket to pant zipper interface
Two-way CNTB YKK zipper gauntlet closure with garage
Interior drawstring waist pull
Adjustable hook-and-loop attachments on waist, forearm and biceps for secure fit
Two interior chest pockets and four exterior pockets (2 chest, 2 hand)
Pass through grommet in left hand pocket for heated gear controller
SAS- TEC CE Level 2 protection panels on the shoulders, elbow and back
Internal construction and loops to accommodate the use of Firstgear® heated gear
Constructed from 100% waterproof materials
MEN'S KILIMANJARO 2.0 JACKET SIZING CHART
SIZE
CHEST
WAIST
SLEEVE
TALL SLEEVE
SMALL
34 - 36
28 - 30
32½ - 33
-
MEDIUM
38 - 40
32 - 34
33½ - 34
-
LARGE
42 - 44
36 - 38
34½ - 35
36 - 37½
X-LARGE
46 - 48
40 - 42
35½ - 36
37 - 37½
2X-LARGE
50 - 52
44 - 46
36.6 - 37
38 - 38½
3X-LARGE
54 - 56
48 - 50
37 - 37½
38½ - 39
Description
Flag Bling Full Cut Short Sleeve Ladies Black T-Shirt. This ladies full length T-Shirt in the color black Features: a rhinestone bling American flag and screen printed text reading 'RIDE FOREVER' and 'FOREVER FREE'
Features:
Made of 100% Cotton
Full Cut
Bling Transfer and Screen-print Combo
Exclusive Artwork
Machine Wash Cold with Like Colors, Dry Low Heat, Iron Inside out if needed
Proudly Printed in the USA
SHORT SLEEVE MEASUREMENTS IN INCHES
LADIES RIDE FOREVER FREE SHIRT SIZING CHART
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOU-LDER TO HIP
25
25
26
27
28
Description
2nd Amendment My Right To Not Be A Victim Black Ladies T-Shirt. This ladies full length T-shirt in the color Black reads 2nd Amendment, My Right To Not Be A Victim enclosing a hand gun, printed in Purple Metallic Ink.
Features:
Made of 100% Cotton
Full Cut Full Length Tee
Front Print Artwork
Exclusive Artwork
Machine Wash Cold with Like Colors, Dry Low Heat, Iron Inside out if Needed
100% Satisfaction Guaranteed, 30 Day No Hassle Return Policy
Proudly Printed in the USA
LADIES NOTE A VICTIM SHIRT SIZING CHART
SIZES
SMALL
MEDIUM
LARGE
X-LARGE
2-LARGE
BUST FULLEST PART OF CHEST AROUND
32
34
36
38
40
LENTH SHOULDER TO HIP
25
25
26
27
28
Description
Ladies Angel Wings T-Shirt. This ladies full length t-shirt in the color Navy Features a screen printed design of patriotic angel wings in the shape of heart and Reads "Live, Love, Ride" on the front, with a similar, yet bigger design on the back.
Features:
100% Cotton
Full Cut Full Length Tee
Double Sided
Proudly Printed In The USA
LADIES ANGLE WINGS T-SHIRT SIZING CHARTSHORT SLEEVE MEASUREMENTS IN INCHES
SIZE
SMALL
MEDIUM
LARGE
X-LARGE
2X-LARGE
BUST FULLEST PART OF- CHEST AROUND
32
34
36
38
40
LENGTH SHOULDER TO HIP
25
25
26
27
28
Features:
Premium Cowhide soft and very versatile
Jean Style Pockets for a casual look
Lined for your comfort
Zip Front for ease when putting it on or taking it off
NOTE: This is a closeout item, only available in a size 2 (26" waist)
Raised on the rain-soaked streets of Portland, the ICON design team knows a few things about wet weather riding. The CE-certified PDX3, named after our home city, combines the necessity of a fully-taped waterproof/breathable shell with premium D3O impact protectors in the elbows, shoulders, and back. In addition, the pit zips provide additional venting ability while the hood rolls up for riding.
FITICON® Relaxed FitMATERIALHycor™ Waterproof/Breathable ChassisInternal 300D Polyester ReinforcementsPROTECTIONJacket Tested and Certified According to EN 17092-4:2020 class AD30® Removable Viper Back; Elbow and Shoulder T5 Impact Protectors - EN 1621-2:2014 / EN 1621-1:2012FEATURESRemovable Insulated Vest Liner, Oversized Pit Vents, Roll & Stow Hood
FIT
RELAXED
Our relaxed fit jackets are designed with a loose and longer fit so that it can be worn by those with a full frame and over another garment.
WATERPROOFING
GOOD
Hycor™ chassis provides optimum weather coverage
CONDITIONS
COLD to MILD
Superior materials and a removable insulated liner minimizes bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.
JACKET SIZING INFORMATION
There are three variables to consider when sizing an ICON jacket. The first two are the chest and sleeve measurements, which are what your jacket size is based on. The third is the the jacket fit type, which defines the “cut” of the jacket (Attack, Sport, or Relaxed). Instructions, sizing charts and jacket fit details can be found below. The fit type of every Icon jacket can be found in the first bullet point of the copy block for that individual product.
Measurement
Chest
Sleeves
Attack
Tailored Body
Precurved arms
Sport
Straight Body
Semi-precurved Arms
Relaxed
Straight Body
Straight Arms
CHEST MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, wrap a flexible tape measure around your chest at its largest point. The tape measure should go through your armpit and stay parallel with the floor while taking the measurement.
SLEEVE MEASUREMENT INSTRUCTIONS
While standing with your arms relaxed at your side, place one end of a flexible tape measure on your spine at the base of your neck. Measure over the top of your shoulder, down over the point of your elbow, and finish at the wrist bone.
WOMENS JACKET SIZING CHART
Size
Chest Inches
Sleeve Inches
UK Conversion
Europe Conversion
X-Small
33
29
5
40
Small
35
29.5
7
42
Medium
37
30
9
44
Large
39
30.5
11
46
X-Large
41
31
13
48
2X-Large
43
31.5
15
50
3X-Large
45
32
17
52
PORTLAND
STOWABLE HOOD
Hood rolls up for easy storage
WATERPROOFING/BREATHABLE
Hycor™ chassis provides optimum weather coverage
D3O® IMPACT PROTECTOR PACKAGE
SHOULDERS, ELBOWS, & BACK
Includes a full suite of industry-leading D3O® Impact Protectors (shoulders, elbows, and back). D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.
CARE INSTRUCTIONS
General CareICON® jackets are tough and designed to withstand a great deal of asphalt induced abuse, but no jacket can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your Icon jacket thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural you should replace the jacket. Most Icon textile jackets use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the jacket could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your jacket. Always store your jacket in a dark, well ventilated area. Jackets are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your jacket (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.
Pre-CleaningIt is important to follow a few simple steps to prepare your jacket for washing. Remove the insulated liner from the jacket (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the jacket. Make sure to close and fasten all the pocket flaps.
CleaningInsulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth. Jacket (Textile Areas) - Hand wash the jacket with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle toothbrush works well in helping to remove any bug strikes or road debris. Rinse the jacket with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the jacket!
DryingInsulated Liner - The insulated liner should be allowed to drip dry-only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process. Jacket - DO NOT use a machine dryer. Subjecting the jacket to a machine dryer will damage the jacket and possibly the dryer itself. The only recommended method for drying the jacket is drip-drying. Do not subject the jacket to direct sunlight, hair dryers or any type of heater during the drying process. DO NOT use an iron on any part of the garment.
Made from breathable, moisture wicking polyester, the ZANheadgear Motley Tube is comfortable to wear in both warm and cold climates. Also the versatility of the Motley Tube allows it to be worn 6 different ways; a beanie, ear warmer, desert scarf, face mask, neck warmer, or balaclava. Pinstripe Web. Material: 100% Polyester
Description
This official T-Shirt displays a screen printed image of a variety of pistols and rifles on a black tee and states "FREEDOM"
Features:
100% heavyweight cotton shirt
Screen printed on Front side only
Proudly printed in the USA
FREEDOM GUNS SHIRT SIZING CHART
SIZES
LENTH
WIDTH
MEDIUM
29
20
LARGE
30
32
X-LARGE
31
34
2X-LARGE
32
26
3X-LARGE
33
27/1/2
Description
FOR RECONDITIONING ANY COLOR, SMOOTH-FINISH LEATHERS.
An expert always takes care of their tools because they knows their tools take care of them. Danner boots are no exception and Danner Boot Dressing is the key to maintaining their quality. This premium dressing is formulated to keep smooth leather of any color from drying and cracking and should be used to recondition boots after hard use. Boot Dressing Compound is water resistant and allows for breathability. This is especially important to GORE-TEX boots, as the waterproof membrane needs to be able to breathe through the leather to work most efficiently. For use on full-grain leather only. For nubuck, suede or rough-out leather, try our Waterproofing Spray.
Features:
Washable drum dyed leather construction
Perforated top for ventilation
Gel palm for comfort and vibration reduction
Secure hook-and-loop wrist strap
MENS GLOVES SIZING CHART
SIZE
HAND (IN)
SMALL
3"
MEDIUM
3.5"
LARGE
4"
X-LARGE
4.5"
2X-LARGE
5"
3X-LARGE
5.5"
Features:
11 Ounce Heavyweight
70% Cotton 30% Polyester
2nd Amendment Print
Screen printed on Front
Proudly printed in the USA
MEN'S 2nd AMENDMENT PULLOVER SIZING CHART
SIZE
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
CHEST FULLEST PART OF- CHEST AROUND
40-42
44-46
48-50
52-54
56-58
LENGTH SHOULDER- TO WAIST
20-21
22-23
24-25
26-27
28-29
*All measurements in inches. The measurements are of the garment only and not of a human's body. Please use this chart as a guide only.
Description
With a strategic fusion of FreeAir™ mesh, goatskin leather, and integrated armor, the Phoenix 5. 1 glove delivers the ultimate combination of breathability, mobility, and protection.
Features:
Goatskin leather chassis with breathable Free Air™ mesh panels on the backhand
Injection molded TPU knuckle armor with integrated, high-velocity vent intakes
Additional high density 3mm padding on the fingers
Contoured goatskin palm with 3mm padded heel
Double stitched Chamude palm overlay
Perforated goatskin leather fingers with integrated Full Flex™ stretch panels for maximum mobility
SmartTouch™ conductive material on index fingers for instant mobile friendly, touchscreen access
Ergonomic, pre-curved, ride-friendly design
Combined leather and neoprene short profile cuff with hook-and-loop closure and integrated TPR pull tab
Gear up for the journey with Eagle Leather's Dual Function Overpant. Designed for the modern rider, these pants are crafted from premium cowhide and feature a lined interior for added comfort. With quality YKK zippers and a 2-year warranty, you can ride with confidence knowing your gear is backed by Eagle Leather.
Features:
Premium Cowhide
Broken-in Leather
Zippered Pocket Entry
Lined
YKK Zippers
2-Year Eagle Leather Warranty
Feature Name and Importance:
Premium Cowhide: The 1.2 to 1.4mm thick, drum dyed cowhide provides durability and comfort, ensuring the pants last and feel great to wear.
Broken-in Leather: Feels great from day one, providing immediate comfort without the need for a wear-in period.
Zippered Pocket Entry: The pockets provide convenient storage, with one front and one back pocket opening into your jeans for added convenience.
Lined Interior: Makes the pants easier to get into and out of, enhancing comfort and wearability.
YKK Zippers: Renowned for their quality and durability, these zippers zip the entire leg for easy access and removal.
2 Year Eagle Leather Warranty: Provides peace of mind, guaranteeing the quality and durability of your purchase.
Description
HJC has created a true youth helmet with the CL-Y. The youth-size polycarbonate shell provides a lightweight helmet, with superior fit and comfort using advanced CAD technology. An integrated ventilation system enhances cooling airflow. The large eye port design allows for maximum visibility and hosts a flash-mounted shield ratchet system that is simple and easy to use when changing the shield.
Features:
True Youth Size Polycarbonate Shell: Lightweight, superior fit and
comfort using advanced CAD technology
Integrated Ventilation System: Provides cooling airflow
Large Eye Port Design: For maximum visibility
Flush-mounted Shield/Ratchet System: Simple and easy to use
Plush, Nylex ® Interior: Washable and Removable
DOT approved
Available Sizes: YOUTH S/YOUTH M/YOUTH L
3 year manufacturer warranty
REPLACEMENT PARTS SOLD SEPERATELY
HJ-05 shields
Vents
Gear Pate Set
Chin Curtain
Head Liner
Cheek Pad
Shield Options
HELMET SIZING CHART
SIZE
CENTIMETER
HAT SIZE
INCHES
Small
55-56
6 7/8 – 7
21 5/8 – 22
Medium
57-58
7 1/8 – 7 1/4
22 1/4 – 22 7/8
Large
59-60
7 3/8 – 7 1/2
23 1/4 – 23 5/8
Hj-05 Standard Shield
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Double-Sided Anti-Fog Coating
Soft Airy Double Foam
Includes Micro-Fiber Pouch for Storage and Cleaning
Matte Black Frames
Top and Bottom Venting to Help Prevent Fogging
Fits Over Most Prescription Glasses
Yellow Tint Lens
