Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
Shatterproof Polycarbonate Lens
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Great Peripheral Vision
Double-Sided Anti-Fog Coating
One-Piece Lens Design
Meets ANSI Z87. 1-2010 Standards for use in Industrial Applications
Vented EVA Foam
Includes Microfiber Pouch for Cleaning and Safe Storage
Smoke Lens
4.3 oz,100% combed ring spun cotton
Machine wash cold, inside out, with like colors.
Do not bleach. Tumble dry low. Warm iron if necessary.
Proudly printed in Washington State
AMERICAN PATRIOT MEN'S T SHIRT SIZING CHART
SHIRT SIZES
CENTIMETER
SMALL
35-37
MEDIUM
38-40
LARGE
41-43
X-LARGE
44-46
2X-LARGE
47-49
3X-LARGE
50-53
Features:
Shatterproof Lenses: to protect your eyes
UV400 Filter: for maximum UV protection
Scratch Resistant Coating: to resist scratching
Soft Airy Foam: to keep the wind out and for comfort
Foldable Frame: to save space when not worn
Gloss or Matte Black Foldable Frames
Side Venting to Help Prevent Fogging
Includes Microfiber Pouch for Cleaning and Safe Storage
Yellow Tint Mirror Lens
The Battery Harness connects directly to the battery of your vehicle's battery, enabling your vehicle to also power your heated gear. It also enables your vehicle to supply power to 12V heated garments via ring terminals. Includes the following fuses: 3, 5, 7.5, 10, 15, and 20 Amp.
All Gerbing installations require a Battery Harness to be connected to a Controller for operation (sold separately).
Description
The 12" cable splits power to two different items. Maximum capacity is 20 Amps.
Specifications:
Material: PVC
Max Capacity: 20 Amps
Power: 12V DC to 16V DC
Length: 12"
A heavyweight 100% cotton printed t-shirt in the color black featuring our original Scroll design. Embody the biker image in this exclusive. Order yours today!
LONG SLEEVE MEASUREMENTS IN INCHES
MEN'S BIKER T SHIRT SIZING CHART
SIZES
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
CHEST FULLEST PART OF CHEST AROUND
40
42
44-46
48-50
52-54
LENGTH SHOULDER TO WAIST
28
29
30
31
32
The ZAN Headgear Neoprene Half Face Mask features full coverage of the nose, chin, and cheeks with stretchy, warm and water resistant 2mm thick neoprene. Like most ZAN Headgear face masks it has a black stretch nylon trim for added durability and clean finish. A hook and loop closure allows for adjustability and ensures great fit, and can even be lengthened with our Neoprene Extension Piece (sold separately). Provides coverage of the ears, nose and cheeks from the elements. Can be used with or without a helmet. One size fits most. Black (no design). Material: 70% Neoprene, 30% Polyester. U.S. Patented design.. Material: 70% Neoprene, 30% Polyester. U.S. Patented design.
Features:
Shatterproof Lenses: to protect your eyes
UV400 Filter: for maximum UV protection
Scratch Resistant Coating: to resist scratching
Soft Airy Foam: to keep the wind out and for comfort
Foldable Frame: to save space when not worn
Gloss or Matte Black Foldable Frames
Side Venting to Help Prevent Fogging
Includes Microfiber Pouch for Cleaning and Safe Storage
Clear Lens
Bright white reflection at night
Blends in with black during the day
Adds safety while maintaining good looks
Includes 1 roll each 1/2" X 24" and 1" X 24"w
The first thing you’ll notice about the D3O Ghost armor is how impossibly thin it is. Thinner than most pancakes, in fact, at only 6.5mm. For a more objective reference: that’s a little shy of a stack of 4 quarters.
D3O accomplishes this by 3D printing it’s miracle orange material onto a die-cut sheet of Lycra. This allows the company to put the impact-absorbing magical (aka: non-Newtonian) material exactly where it needs to go, while leaving plenty of space to allow for flexibility and airflow.Ghost armor an ideal upgrade for anyone with a pair of riding jeans, a riding shirt/"shacket," or even a proper jacket. Replacing your current armor (specs listed in product images) will yield a more comfortable and flexible armor setup without sacrificing protection, as the Ghost armor series is fully certified to exceed Level 1 impact absorption requirements.The Ghost components will fit into most standard armor pockets. They contain a loop at the top for fastening a Velcro strap, but currently that would have to be a DIY job.
Description
Lexol provides vital lubrication to keep leather soft while maintaining its strength, durability and beauty. Microscopically fine oil droplets penetrate to combine with the fibers and stay there. This controlled lubrication lets lexol nourish and revitalize leather while avoiding seepage into adjacent materials. Lexol renews the rich luster of leather, assuring a smooth, satin finish while restoring the supple, comfortable feel. What's more, it gives immediate protection to wet or dry leather-without ever leaving an oily residue.
Lexol Leather Conditioner has a liquid base which allows the product to penetrate the surface into leather pores, for deep conditioning that helps prevent cracking and premature aging.
Lexol Leather Conditioner leaves no greasy residue and it contains no silicon ingredients which dry out leather over time. Lexol Leather Conditioner results in supple, strong, and beautiful leather.
Features:
Ideal for use on: leather auto upholstery, footwear, furniture, handbags & briefcases, sports equipment and luggage
Protects leather against cracking and premature aging
