Fire Department MedallionMPN no MD1020 Medallion FireThe Fire Medallion is the third of the six Medallions He gets this Medallion after completing the Once Link defeats and frees all of the within the Fire Temple, the Sage of Fire
Description
"Ride Forever Free, V-Twin Life" inside of a pinstripe shield/flame design with heat sealed backing for easy iron-on application.
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Features:
Easy to install, no tools required
Install or remove in seconds
Relieves stress on your wrist on long trips
Rests on the brake lever to hold the throttle open
Roll off the throttle manually to disengage Go Cruise
Description
Genuine Bell replacement parts. We've got whatever lighting conditions the day throws at you covered with inner shield options for the Revolver EVO helmet: Light Smoke, Dark Smoke, Hi-Def Persimmon, and Rose.
NOTE: Availability, certification, color, and pricing may vary per region. If outside of the USA, please check with your authorized local dealer for more information.
Features:
Shatterproof Polycarbonate Lenses
UV400 Filter for Maximum UV Protection
Scratch Resistant Coating
Venting to Help Prevent Fogging
Adjustable Strap
Matte Black Frames
Soft Airy Foam
Boxed Set Includes Micro-Fiber Pouch for Storage and Safe Cleaning
Photochromic Lenses (Almost Clear to Smoke)
Lenses Transform According to Existing Lighting Conditions
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees. Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure ron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
Description
All patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily.
Patch Sewing Instructions:
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
Identify where you want the patch and outline the area with tailor’s chalk
Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
Position your inside hand so it is resting flat between the lining and outlines area
Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
Finally restitch the garments lining and your all set
Patch Iron-on Instructions:
Preheat your iron to 325-335 degrees
Do Not Use Steam
Press the area where you want your patch to be for 25 seconds
Position the patch on the garment so that it is positioned where you would like it to be
Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure iron the area for 15 seconds
The iron should never come into direct contact with the patch
Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
Turn the garment right side in once more, use your clean lightweight cloth to cover the patch
Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
Let the garment cool completely before wearing
* The perfect storage solution.* Works on any U.S. license plate bracket and works with any Harley- Davidson® windshield bag or any bag with a 1" wide spaced bag bracket attached to the bag!
Features:
Universal Fitting
Includes a hard Sheet Inside the Bag
Heavy Duty Quick Release
100% Waterproof
UV Protected and will not turn white in extreme heat
Bag holds its shape
Gear up for the journey with Eagle Leather's Dual Function Overpant. Designed for the modern rider, these pants are crafted from premium cowhide and feature a lined interior for added comfort. With quality YKK zippers and a 2-year warranty, you can ride with confidence knowing your gear is backed by Eagle Leather.
Features:
Premium Cowhide
Broken-in Leather
Zippered Pocket Entry
Lined
YKK Zippers
2-Year Eagle Leather Warranty
Feature Name and Importance:
Premium Cowhide: The 1.2 to 1.4mm thick, drum dyed cowhide provides durability and comfort, ensuring the pants last and feel great to wear.
Broken-in Leather: Feels great from day one, providing immediate comfort without the need for a wear-in period.
Zippered Pocket Entry: The pockets provide convenient storage, with one front and one back pocket opening into your jeans for added convenience.
Lined Interior: Makes the pants easier to get into and out of, enhancing comfort and wearability.
YKK Zippers: Renowned for their quality and durability, these zippers zip the entire leg for easy access and removal.
2 Year Eagle Leather Warranty: Provides peace of mind, guaranteeing the quality and durability of your purchase.
Features:
Ladies 3/4 Jacket w/ Reflective Tribal Detail
Butter Soft premium Cowhide 1. 2-1. 3mm w/ Full Sleeve Zip-Out Thermal Liner
Longer 3/4 Length w/ Side Stretch Panels and Lower Back Extension Zipper for the Perfect Fit
Chest, Shoulder & Back Vents for Warm Weather Riding
Full Chest, Arm & Shoulder Blacked Out Highly Reflective Piping
Embroidered Reflective Chest Tribal Design w/ Colored Contrast Stitching
Built in Dual Side Concealed Weapon & Ammo Pocket
Features:
Studded Vest With Concealed Carry Pocket
Ladies PREMIUM studded vest
2 exterior pockets
2 interior concealed carry pockets
Side laces for fit
Silver hardware
Features:
Do it yourself kit
18 multicolor patterns, pre-wired, wireless remote control, 12 display modes, music mode pulsates lights to any sound with 5 levels of sound sensitivity, choose what parts of the bike you want to light in any color you like
This is truly a one of a kind system
You can install one of these kits on your motorcycle, car, RV, boat or trailer also
12VDC with 8 in. light bars
Kit includes 6 light bars
Available in (6) 8" bars or (6) 12" bars with 18 super bright L.E.D.s
Will work on sport bikes, scooters, ATVs, snowmobiles and trailers
Full color spectrum, over one million colors, 12 Volt DC applications
Wireless remote
Processor based controller with keypad activation
At this price it is an incredible deal
Features:
1680D Nylon Material
Full Sleeve Zip Out liner
Stand Up Collar with Snap Closure & Two Lower Hand Pockets
Removable Armor in Shoulders, Elbow & Back
Chest, Arm & Back Highly Reflective Striping
Generous Front, Arm & Back Venting
Features:
600D Nylon Textile Material
Full Sleeve Zip Out liner
Front and back venting
Stand Up Collar with Snap Closure & Two Lower Hand Pockets
Gray Striping Outlining Chest, Arms & Back
Day/Night Reflective Piping
4.3 oz,100% combed ring spun cotton
Machine wash cold, inside out, with like colors.
Do not bleach. Tumble dry low. Warm iron if necessary.
Proudly printed in Washington State
AMERICAN PATRIOT MEN'S T SHIRT SIZING CHART
SHIRT SIZES
CENTIMETER
SMALL
35-37
MEDIUM
38-40
LARGE
41-43
X-LARGE
44-46
2X-LARGE
47-49
3X-LARGE
50-53
Features:
Premium Cowhide soft and very versatile
Jean Style Pockets for a casual look
Lined for your comfort
Zip Front for ease when putting it on or taking it off
NOTE: This is a closeout item, only available in a size 2 (26" waist)
Features:
Ladies Nina Vest Black
Ladies Premium Leather Vest
Black mesh lining
2 inside concealed carry pockets
Black oxy hardware
2 inside conceal carry pockets
Features:
1.0-1.1 mm Cow Jumble Leather
Full Sleeve Zip Out liner
Fringe Detailing on Arms
Rivet Detailing Throughout
Dual Inside Concealed Weapon Gun Pockets
Double Set Side Buckles For a Custom Fit
One Chest & Two Lower Zippered Angled Pockets
Interior Electronic Media Pocket with Wire Feed
Description
Ladies calf lace boot with buckles for adjustment and a snakeskin patter under the lacing for accent.
Features:
Synthetic Leather Upper
Anti-Slip Bottom
Heel & Calf Lacing Design
Side Zipper Entry
Specifications:
Brand: Milwaukee Leather
Group: BOOTS
Status: NEW ARRIVAL
Classification: WOMEN BOOTS
Style: MBL9427
Size: 6-11
Color: BLACK
Full-Grain Leather UpperTo ensure its quality, we put our leather through nine different tests before making our selection. Our full-grain leathers are the strongest and most durable form of leather.
GORE-TEX (GTX)100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.Triple StitchedHyper-strong thread is used to triple stitch our toughest boots.
Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.
Quarry MidsoleUpgraded the midsole to a single, solid piece for increased longevity
Vibram® Quarry OutsoleThis exclusive outsole features a 90º heel, an oil- and slip- resistant rubber compound, and a non-linear lug pattern for superior traction and debris release.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
How It FitsThe 610 is our most universal last and can be worn by all foot shapes and sizes. It provides a snug fit through the heel while allowing ample toe room for most versatile fit. This allows more support and side-to-side movement.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching. See our Recrafting page.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
RELIABLY RUGGED
Built in the USA with a dedication to quality that goes back to 1932, the Bull Run is a utilitarian work boot with a timeless design that stays in style when you punch out. The full-grain leather upper is the perfect blend of strong and soft. Combine that with the sturdy Danner Wedge outsole and you get all-day comfort that lasts.
Full-Grain, Oiled Leather UpperAfter incorporating oil into the tanning process, we take the oiled, full-grain leather and put it through a series of rigorous testing to ensure its strength and durability. This form of leather is more resistant to water and other liquid damage and requires less maintenance over time.
Unlined Leather UpperLighter weight with cool comfort in warmer temperatures, our unlined leather boots will mold perfectly to your foot.
Electrical Hazard (EH) ProtectionElectrical hazard (EH) footwear is manufactured with non-conductive electrical shock resistant soles and heels.
Oil and Slip ResistantOur oil-and-slip resistant outsoles have been certified to meet OSHA safety standards.
Removable OrthoLite FootbedThree layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood. Not recommended for daily use on asphalt.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
When the Open Road Calls
Danner consulted with motorcycling experts to create the Danner Moto, our first-ever motorcycle boot. The durable 5.5 ounce leather upper has an extra layer of leather at the toe and a medial clutch guard that stands up to wear and tear. D3O® foam inside the collar is light and flexible but stiffens upon impact to help keep you protected. The flat wedge offers sure-footedness on the pegs.
Full-Grain Leather Upper
To ensure its quality, we put our leather through six different tests before making our selection. Our full-grain leathers are the strongest and most durable form of leather.
Extra Thick Leather UpperThis boot is built with a strong and durable leather upper that stands up to hard wear.
GORE-TEX (GTX)100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.
Danner Wedge OutsoleThe non-marking, oil-and-slip resistant Danner Wedge outsole provides cushioning, lightweight support, traction, and won't track debris. The soft polyurethane compound is designed for maximum comfort for long days on smooth indoor surfaces, such as concrete and wood.
Stitchdown ConstructionHandcrafted to provide a wider platform, our legendary stitchdown construction offers increased stability underfoot. Many of our stitchdown boots can be recrafted.
Medial Clutch GuardAn added layer of leather on the medial side resists abrasion.
How It FitsPortland made 503 last has a casual fit without compromising Danner's comfortable lace-to-toe construction. Fits true to size.
RecraftableExtend the life of your boot with our recrafting services. This boot is eligible for a number of paid services, including part replacement, leather care and restitching.
365-Day WarrantyIf you suspect your purchase isn’t up to our unrelenting standards, or is defective in any way, we want to make things right. We offer a 365-day warranty across our entire footwear line.
Made in USA
This classification of manufacturing is our promise that this product was built from top to bottom in our Portland, Ore. factory. Our USA Made boots are built with the same commitment to superior craftsmanship that we’ve been known for since 1932.
We bring to you comfortable t-shirts in attractive color combinations and amazing prices. Our wide range of t-shirts are designed to make you stand apart, no matter what the occasion
MEN'S DEAD END SHIRT SIZING CHART
SIZE
MEDIUM
LARGE
X-LARGE
2X-LARGE
3X-LARGE
4X-LARGE
5X-LARGE
NECK
15" - 15.75"
15.75" - 16.5"
16.5" - 17.25"
17.25" - 18.25"
18.25" - 19.25"
19.25" - 20.25"
20.25" - 21.25"
CHEST
38-40"
40-42"
42-44"
44-46"
46-48"
48-50"
50-52"
