Built to keep you dry from the waist down, the PDX3™ overpant is ready for street action. It is constructed from a fully-taped Hycor waterproof/breathable material and reinforced with 300d poly in critical zones. Additionally, the CE-certified PDX3 is equipped with D3O impact knee protectors for complete coverage.
ICON® Overpant Fit
Hycor™ waterproof/breathable chassis
Internal 300D polyester reinforcements
Tested and Certified According to EN 17092-4:2020 class A
D30® Removable Knee Impact Protectors - EN 1621-1:2012
Full-length inseam zippers, Reflective Trims
The shell pattern is cut generously to fit over your normal pants or, depending on conditions, can worn as a stand alone piece.
Hycor™ chassis provides optimum weather coverage
COLD to MILD
Superior materials minimize bulk while retaining range of motion and adaptability to the weather, keeping you comfortable on mild to colder riding days.
BUILT TO KEEP YOU DRY FROM THE WAIST DOWN
Hycor™ chassis provides optimum weather coverage
BE SEEN, BUT STILL LOOK AWESOME
Retro-reflective hits ensure visibility in low light conditions, and are a must for urban commuting.
D30® IMPACT PROTECTORS
Includes D3O® knee impact protectors. D3O® unique technologies provide both enhanced protection and a versatile, flexible material for a host of shock absorption and impact protection. Delivering the most flexible and discreet protection on the market, D3O® consistently outperforms traditional foam-based materials.
OVERPANT SIZING INFORMATION
There are three variables to consider when sizing ICON pants. The first two are the waist and inseam measurements, which are what your pant size is based on. The third is the fit type of the pant. Measurement instructions and sizing charts can be found below. The fit type of every ICON pant can be found in the first bullet point of the copy block for that individual product.
WAIST MEASUREMENT INFORMATION
While standing in a relaxed position, measure around your natural waistline, while keeping the tape measure parallel to the floor.
MENS OVERPANT SIZING CHART
|Size||Waist||UK Conversion||Europe Conversion|
ICON® pants are tough and designed to withstand a great deal of asphalt induced abuse, but no pant can survive every conceivable motorcycle accident. Should the unfortunate occur and you crash in your ICON® pant, thoroughly review the product for any signs of structural damage (major abrasion, holes, damaged seams, etc). Should there be any damage or if you are unsure if the damage is structural, you should replace the pant. Most Icon textile pants use a coating on the shell material which reinforces the overall fabric matrix. Improper cleaning of the pant could compromise the integrity of this coating leading to material failure. Unnecessary exposure to Sunlight and UV rays should be avoided. This is most critical when storing your pant. Always store your pant in a dark, well ventilated area. Pants are best hung on a wide padded hanger. Do not wrap in plastic or other nonporous materials as this may cause the fabric to discolor. Finally, avoid exposing your pant (or any of your riding gear) to fumes or vapors from gasoline or any harsh chemicals. These fumes weaken the structure of nylon and polyester textiles lessening their inherent protective capabilities.
It is important to follow a few simple steps to prepare your pant for washing. Remove the insulated liner from the pant (if so equipped). When removing the liner unsnap each snap carefully - DO NOT apply excessive force - as this may break the snap. Remove all impact protectors from the pant. Make sure to close and fasten all the pocket flaps.
Insulated Liner - Hand wash the insulated liner in warm water with a mild liquid laundry detergent. Thoroughly rinse insulated liner with clean water to remove all detergent. Should you desire to clean the impact protectors they can be cleaned by wiping the protectors with a damp cloth.
Pant - Textile Areas - Hand wash the pant with warm water and a mild liquid laundry detergent. Hand washing minimizes unnecessary stress on the garment. A soft bristle tooth brush works well in helping to remove any bug strikes or road debris. Rinse the pant with clean water to remove all detergent. DO NOT use any form of oxygenated detergent, bleach, fabric softeners, or dry cleaning chemicals. These items will damage the pant!
Insulated Liner - The insulated liner should be allowed to drip-dry only. DO NOT use a machine dryer, direct sunlight, hair dryers or any type of heater during the drying process.
Pant - DO NOT use a machine dryer. Subjecting the pant.
Eagle Leather offers Free Ground Shipping on orders over $69 shipped in the Contiguous 48 US States.
Items marked as Online Only are shipped from our warehouse's all other items are shipped from our Lakewood store.
Orders are usually processed the next business day with shipping information becoming available once the packed enters the shipping services system.
Shipping is calculated at checkout, and is based upon shipping service selected and destination.
Read Full Details Here